What is the difference between the TECHART Threaded Spring Kit and the TECHART Sport Spring Kit for the 992?

The Sport Spring Kit is a fixed-rate drop-in replacement for the factory main springs, providing a preset lowering of approximately 40mm on standard Carrera chassis. The Threaded Spring Kit is a height-adjustable system with a 15 to 40mm lowering range; the ride height can be fine-tuned at any point within that range using the adjusting rings. The Threaded Spring Kit also fits a broader range of 992 variants, including the GTS, Targa, and 992 Turbo/S; the Sport Spring Kit covers Carrera C2/C2S/C4/C4S/T only. For owners who want precise, adjustable control over ride height, the Threaded Spring Kit is the more flexible choice.

What is the lowering range of the Threaded Spring Kit for the 992 Turbo/S?

The 992 Turbo/S variant of the Threaded Spring Kit provides different lowering ranges at each axle due to the Turbo's different front and rear suspension geometry. The front axle lowers between 5 and 20mm; the rear axle lowers between 10 and 30mm. This asymmetric range is intentional and reflects the different spring rate and geometry of the Turbo platform versus the Carrera. TECHART part number for the Turbo/S variant is 092200180009; the Carrera variant with 15-40mm even lowering is 092200170009.

Does the TECHART Threaded Spring Kit work with PASM, the front axle lift system, and Sport Chassis?

Yes. The system fits vehicles equipped with and without PASM, as well as with and without the front axle lift system or Porsche Sport Chassis. All three optional factory suspension configurations are fully compatible with both the Carrera and Turbo/S variants of the Threaded Spring Kit.

What does the helper spring in the kit do?

The two helper springs are included alongside the four main springs and work with the adjusting rings to maintain proper spring contact and loading at the outer edges of the adjustable height range. When a spring kit is lowered significantly, the reduced suspension travel can cause the main spring to unload or become unseated at full droop. The helper spring prevents that by maintaining a minimum load on the spring seat through the full range of height adjustment.

Does adjusting the height require removing the kit from the car?

Height adjustments are made by turning the adjusting rings on the threaded portion of the spring perch; this can be done with the kit installed in the car using the provided assembly tools, though the car must be raised and the suspension unloaded to make changes. After any height adjustment, a full wheel alignment is required to confirm that camber and toe remain at the correct settings for the new ride height.

What is included in the TECHART Threaded Spring Kit?

Both the Carrera and Turbo/S variants include: four main sport springs, two helper springs, four adjusting rings, assembly parts, assembly instructions, and a TÜV certificate. The TÜV certificate confirms German homologation compliance for the modified suspension system. Part numbers are 092200170009 for the Carrera variant and 092200180009 for the Turbo/S variant.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

TECHART Club-Sport Package 6-Point Racing Harness for 992 Porsche 911

The TECHART 6-Point Racing Harness for the Porsche 992 is designed for motorsport enthusiasts seeking optimal safety and support. Engineered for high-performance driving, this harness ensures a secure fit during intense track sessions, offering enhanced protection with its FIA-compliant design. Available in a variety of colors, it seamlessly integrates into the interior, providing both functionality and a custom touch for your Porsche 992. Perfect for those looking to elevate their driving experience, it is a crucial upgrade for any serious driver.

Features

6-point harness
Available in black, green, red and yellow
Optional kit for deep bucket seats or OEM Porsche bucket seats

What’s Included

6-point belt (2+3) “X2″ Racing Harnesses – HANS use only 7/16” UNF eyebold (2x 23mm, 2x)
Aluminum buckle
Accessory kit (crotch belt and lap belt)

Applications

Porsche 911 Carrera: 992.1, 992.2 | 2019-present
Porsche 911 Carrera S: 992.1 | 2019-2024
Porsche 911 Carrera 4: 992.1 | 2019-2024
Porsche 911 Carrera 4S: 992.1 | 2019-2024
Porsche 911 Carrera GTS: 992.1 | 2019-2024
Porsche 911 Carrera 4 GTS: 992.1 | 2019-2024
Porsche 911 Turbo: 992.1 | 2020-2024
Porsche 911 Turbo S: 992.1 | 2020-2024
Porsche 911 GT3: 992.1 | 2021-2024
Porsche 911 GT3 Touring: 992.1 | 2021-2024
Porsche 911 Sport Classic: 992.1 | 2022-2024
Porsche 911 S/T: 992.1 | 2024-2024

Notes

Sold individually
Requires bucket seats and roll bar for fitment
When mounted, a belt attachment to the car body is made
Drilling in car body required
Step drill and corrosion protection are required for mounting
This product only fits 992 coupe models
Complete the interior with the steel roll bar
Does not fit GT3 RS & Dakar
TECHART products are shipped directly from Germany, as a result delivery times may vary depending on the product

Frequently Asked Questions

What is the difference between the TECHART Threaded Spring Kit and the TECHART Sport Spring Kit for the 992? The Sport Spring Kit is a fixed-rate drop-in replacement for the factory main springs, providing a preset lowering of approximately 40mm on standard Carrera chassis. The Threaded Spring Kit is a height-adjustable system with a 15 to 40mm lowering range; the ride height can be fine-tuned at any point within that range using the adjusting rings. The Threaded Spring Kit also fits a broader range of 992 variants, including the GTS, Targa, and 992 Turbo/S; the Sport Spring Kit covers Carrera C2/C2S/C4/C4S/T only. For owners who want precise, adjustable control over ride height, the Threaded Spring Kit is the more flexible choice.
What is the lowering range of the Threaded Spring Kit for the 992 Turbo/S? The 992 Turbo/S variant of the Threaded Spring Kit provides different lowering ranges at each axle due to the Turbo’s different front and rear suspension geometry. The front axle lowers between 5 and 20mm; the rear axle lowers between 10 and 30mm. This asymmetric range is intentional and reflects the different spring rate and geometry of the Turbo platform versus the Carrera. TECHART part number for the Turbo/S variant is 092200180009; the Carrera variant (15-40mm even lowering) is 092200170009.
Does the TECHART Threaded Spring Kit work with PASM, the front axle lift system, and Sport Chassis? Yes. The system fits vehicles equipped with and without PASM, as well as with and without the front axle lift system or Porsche Sport Chassis. All three optional factory suspension configurations are fully compatible with both the Carrera and Turbo/S variants of the Threaded Spring Kit.
What does the helper spring in the kit do? The two helper springs are included alongside the four main springs and work with the adjusting rings to maintain proper spring contact and loading at the outer edges of the adjustable height range. When a spring kit is lowered significantly, the reduced suspension travel can cause the main spring to unload or become unseated at full droop. The helper spring prevents that by maintaining a minimum load on the spring seat through the full range of height adjustment.
Does adjusting the height require removing the kit from the car? Height adjustments are made by turning the adjusting rings on the threaded portion of the spring perch; this can be done with the kit installed in the car using the provided assembly tools, though the car must be raised and the suspension unloaded to make changes. After any height adjustment, a full wheel alignment is required to confirm that camber and toe remain at the correct settings for the new ride height.
What is included in the TECHART Threaded Spring Kit? Both the Carrera and Turbo/S variants include: four main sport springs, two helper springs, four adjusting rings, assembly parts, assembly instructions, and a TÜV certificate. The TÜV certificate confirms German homologation compliance for the modified suspension system. Part numbers are 092200170009 for the Carrera variant and 092200180009 for the Turbo/S variant.

About TECHART

Established in Stuttgart, Germany in 1987, TECHART specializes in high-quality refinements for Porsches. Recognized as one of the finest in the field, TECHART provides the ultimate enhancements for your luxury vehicle. In addition to its German headquarters, TECHART has operations based in the United States.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

TECHART Club-Sport Package 6-Point Racing Harness for 992 Porsche 911

Guaranteed Safe Checkout

TECHART Club-Sport Package 6-Point Racing Harness for 992 Porsche 911

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About TECHART

Reviews