What do I need with the Supersprint Valved Rear Exhaust for G29?

Supersprint lists the Valved Rear Exhaust for G29 in its four-cylinder systems behind the front pipe 525622 or 526522 and the Center Pipe 526613. It does not state that the rear must be installed with them, so ask Bulletproof Automotive before fitting it to the factory mid section.

What tips does it have?

Supersprint lists it as Right O100 and Left O100 with valve, one round 100mm tailpipe on each side. It is made for the factory bumper of the four-cylinder Z4. A Z4 with the four-exit M40i diffuser takes the Quad-Tip Valved Rear Exhaust 526626 instead.

Is it registered for the USA Z4?

Supersprint names European Z4 sDrive20i and sDrive30i models and the Supra SZ-R and Fuji Speedway for this rear, and no USA-model car. Send your VIN to Bulletproof Automotive before ordering a US car so we can confirm the fit with Supersprint.

How long is the lead time?

Supersprint lists it as availability on demand, so it is built to order in Mantova. Bulletproof Automotive lists it on backorder with notification, and you are told when the build is booked in Mantova and again when it ships to you.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Supersprint Valved Rear Exhaust for G29 BMW Z4 sDrive20i / sDrive30i and A90 Toyota GR Supra 2.0 [526624]

Supersprint’s Valved Rear Exhaust for G29 BMW Z4 sDrive20i / sDrive30i is the rear for a roadster that has to be good company on a long drive and exciting at the end of it. The valve closes for a quiet setting with the roof down on the highway, and opens to let the B48 out through a 100mm Supersprint tailpipe on each side. Supersprint registers it for the European Z4 sDrive20i and sDrive30i with the factory exhaust valve, with and without the particulate filter, and for the two-litre GR Supra SZ-R and Fuji Speedway. For most four-cylinder Z4 owners, it is the better choice of the two 100mm rears.

Features

Right and left rear mufflers with a valve
One 100mm Supersprint tailpipe each side
Made for the factory bumper
T304 stainless steel, built to order in Mantova

Applications

BMW Z4 sDrive20i and sDrive30i: G29 | 2018-present | B48, models with the factory valve, with and without the particulate filter
Toyota GR Supra 2.0 Fuji Speedway: A90 | 2020-present | B48
Toyota GR Supra 2.0 SZ-R: A90 | 2020-present | B48

Notes

The Valved Rear Exhaust for G29 is sold as a right and left pair with tailpipes fitted
In a full Supersprint system it follows the V-Clamp Front Pipe (525622) or Slip-On Front Pipe (526522) and the Center Pipe (526613)
The Racing alternative is the Race Rear Exhaust (049724); for a Z4 with the M40i diffuser see the Quad-Tip Valved Rear Exhaust (526626)
Supersprint registers it for the European Z4 sDrive20i and sDrive30i and for the four-cylinder GR Supra it names SZ-R and Fuji Speedway; it does not name a USA-model car, so send your VIN before ordering
The rest of the Supersprint G29 range is listed here

Frequently Asked Questions

What do I need with the Supersprint Valved Rear Exhaust for G29? Supersprint lists the Valved Rear Exhaust for G29 in its four-cylinder systems behind the front pipe 525622 or 526522 and the Center Pipe 526613. It does not state that the rear must be installed with them, so ask Bulletproof Automotive before fitting it to the factory mid section.
Which cars suit the valve? Supersprint registers this rear for the Z4 versions it lists as with valve, the cars with a factory exhaust valve, with and without the particulate filter. It also covers the two-litre GR Supra SZ-R and Fuji Speedway. Send the VIN if unsure.
What tips does it have? Supersprint lists it as Right O100 and Left O100 with valve, one round 100mm tailpipe on each side. It is made for the factory bumper of the four-cylinder Z4. A Z4 with the four-exit M40i diffuser takes the Quad-Tip Valved Rear Exhaust 526626 instead.
Is it registered for the USA Z4? Supersprint names European Z4 sDrive20i and sDrive30i models and the Supra SZ-R and Fuji Speedway for this rear, and no USA-model car. Send your VIN to Bulletproof Automotive before ordering a US car so we can confirm the fit with Supersprint.
How long is the lead time? Supersprint lists it as availability on demand, so it is built to order in Mantova. Bulletproof Automotive lists it on backorder with notification, and you are told when the build is booked in Mantova and again when it ships to you.

About Supersprint

Supersprint has built exhaust systems in Mantova, Italy since 1955, designing and manufacturing in house rather than assembling bought-in parts. Piping is AISI 304 stainless at a nominal 1.5mm wall, mandrel bent and TIG or MIG welded to CNC machined stainless flanges 7mm to 12mm thick; AISI 310S and Inconel come out where thermal load is highest, and catalyst hardware comes from HJS. Every application is developed against a baseline measured on the AWD MAHA dynamometer in Mantova, which is why the catalogue is model specific rather than universal.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Supersprint Valved Rear Exhaust for G29 BMW Z4 sDrive20i / sDrive30i and A90 Toyota GR Supra 2.0 [526624]

Guaranteed Safe Checkout

Supersprint Valved Rear Exhaust for G29 BMW Z4 sDrive20i / sDrive30i and A90 Toyota GR Supra 2.0 [526624]

Features

Applications

Notes

Frequently Asked Questions

About Supersprint

Reviews