Do these LARTE Design Urus SE side skirts fit the Urus S or Performante?

No, they're shaped around the SE's specific body lines. The Urus S and Performante carry different proportions along the doors and fenders, so LARTE Design tools a separate set for those cars.

What exactly comes in this side skirt set?

LARTE Design's Urus SE side skirts include three moldings per side; a front fender molding, a front door molding, and a rear door molding, for six pieces total covering both sides of the car.

What's the difference between choosing carbon fiber or basalt fiber for this set?

Carbon fiber keeps the moldings as light as possible with an exposed weave finish, while basalt fiber trades a little of that weight savings for better resistance to sun and daily weather. All six pieces come in whichever material you choose.

Will installing these side skirts require cutting or drilling into my Urus SE?

No, each molding in this Urus SE side skirt set bolts to the factory mounting points along the fenders and doors. LARTE Design engineers its LARGENDA components as direct bolt-on pieces, so nothing about the original bodywork is altered.

What do side skirts actually change about how the Urus SE looks?

These Urus SE side skirts create one continuous lower line running from the front fender back through both doors, which visually stretches the body and lowers its perceived stance, an effect no single molding achieves on its own.

Is this a set I can install myself, or does it need a professional shop?

An installer comfortable removing door and fender trim can fit these without special tools. Most owners still have a shop handle the full six-piece set at once to keep the line consistent from front to rear.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

LARTE Design Side Skirt Set for Lamborghini Urus SE

A side profile either reads as one continuous line or it doesn’t, and that’s the entire point of LARTE Design’s Urus SE side skirts. The set runs three moldings down each side of the car, a front fender piece that extends the arch’s lower edge forward, plus front and rear door moldings that carry that same line back toward the rear wheel, all cut from 100% pre-preg carbon fiber or a basalt fiber composite. LARTE has been producing pieces like this at its Erkrath, Germany facility since 2012, and every molding in the set carries the same KBA type approval and GTÜ Stuttgart certification as the rest of the LARGENDA program. On the Urus SE, that continuous lower line visually stretches the body and drops its perceived center of gravity, turning a tall SUV silhouette into something that reads more planted at speed. Sold as a complete six-piece set, three moldings per side, this is one of the more effective ways to change how the whole car sits without touching a single body panel underneath.

Carbon Fiber and Basalt: The Materials Behind Every Urus Kit

Carbon fiber and basalt fiber solve two different problems on with these LARTE Urus SE side skirts. The carbon fiber build uses 100% pre-preg material, laid up for the lightest possible panel and the exposed weave finish that comes with it. Basalt fiber gives up a little of that light weight for a composite that shrugs off UV exposure and holds up to real driving conditions rather than a climate-controlled garage. Both versions are add-on moldings engineered to enhance the Urus SE’s factory rocker panels and doors, not replace or cut into them; every LARTE Design piece bolts to the stock mounting points and leaves the original bodywork intact.

LARTE Design

Since 2012, LARTE Design has turned out exclusive body kits for premium and luxury brands, with completed work spanning Mercedes-Benz, BMW, Bentley, Cadillac, Infiniti, Maserati, and Tesla. Every build starts with clay shaped by hand on the real car, not a render on a screen, and ships out in packaging designed to survive the trip regardless of destination. Construction runs 100% carbon fiber across the board, with a catalog that stretches from small widebody details to ground-up transformations depending on what an owner is after.
- Philosophy: A LARTE build doesn’t leave the company’s hands at any point. It opens with a direct line to a personal manager and closes when the finished kit arrives in LARTE’s own packaging, ready for a partner atelier overseas or LARTE’s own shop in Germany to install. Materials pass certification before they’re used in a kit, no matter the scale of the project.
- Design: LARTE starts with clay, shaped by hand directly on the vehicle rather than sketched on a computer. From there, engineers and designers push that shape through 3D prototyping and refine it again before any cutting happens, and that sequence is why a finished panel sits like it belongs to the original body rather than sitting on top of it.
- Manufacture: Nothing about production leaves LARTE’s building, from the first approved sketch to the final assembled part. Every piece is 100% carbon fiber, built using manufacturing processes LARTE patented itself, and each one gets tested, certified, and inspected by hand before it’s cleared to ship.
- Certification: LARTE Design GmbH holds TÜV NORD certification and gets re-audited every three years on quality, management systems, production, and staff. The same bar applies across every carbon component LARTE makes, whether it’s already bolted to a customer’s car or still sitting on the shop floor.

Features

Includes three molding pieces per side (front fender molding, a front door molding, and a rear door molding)
Available in painted basalt-fiber composite or in visible carbon fiber weave
Patented layup and molding processes
Hand-built and inspected in-house in Germany under TÜV NORD certification
Bolt-on installation to the Urus’s factory attachment points (no drilling, no modification to the factory structure)
National type approval from the KBA, independently confirmed by GTÜ Stuttgart
Fitment guarantee
Sold as a complete six-piece set

Applications

Lamborghini Urus SE: 2025-present

More LARTE Design for Lamborghini Urus SE

Notes

Built specifically for the Urus SE’s body lines; not a shared fitment with the standard Urus S or Performante
These side skirts are included with the purchase of the LARGENDA body kit
Custom coloring is available, please contact us for more information

Frequently Asked Questions

Do these LARTE Design Urus SE side skirts fit the Urus S or Performante? No, they’re shaped around the SE’s specific body lines. The Urus S and Performante carry different proportions along the doors and fenders, so LARTE Design tools a separate set for those cars.
What exactly comes in this side skirt set? LARTE Design’s Urus SE side skirts include three moldings per side; a front fender molding, a front door molding, and a rear door molding, for six pieces total covering both sides of the car.
What’s the difference between choosing carbon fiber or basalt fiber for this set? Carbon fiber keeps the moldings as light as possible with an exposed weave finish, while basalt fiber trades a little of that weight savings for better resistance to sun and daily weather. All six pieces come in whichever material you choose.
Will installing these side skirts require cutting or drilling into my Urus SE? No, each molding in this Urus SE side skirt set bolts to the factory mounting points along the fenders and doors. LARTE Design engineers its LARGENDA components as direct bolt-on pieces, so nothing about the original bodywork is altered.
What do side skirts actually change about how the Urus SE looks? These Urus SE side skirts create one continuous lower line running from the front fender back through both doors, which visually stretches the body and lowers its perceived stance, an effect no single molding achieves on its own.
Is this a set I can install myself, or does it need a professional shop? An installer comfortable removing door and fender trim can fit these without special tools. Most owners still have a shop handle the full six-piece set at once to keep the line consistent from front to rear.

About LARTE Design

LARTE Design has built exclusive body kits for premium and luxury vehicles out of Germany since 2012, with completed programs across Mercedes-Benz, BMW, Bentley, Cadillac, Infiniti, Maserati, and Tesla. The company works the way a coachbuilder used to work before CAD took over the industry, starting every project with clay modeling done directly on the physical car before engineers move into 3D prototyping to finalize the surfaces, which is why LARTE panels tend to read as part of the car’s original design rather than an aftermarket addition. Every component is built from 100% carbon fiber using several manufacturing processes patented in-house, and the company holds TÜV NORD certification covering product quality, management systems, production processes, and personnel, recertified every three years, with nothing leaving the workshop until it has been tested, certified, and inspected by hand. Orders run through a personal manager from the first conversation through final delivery, and installation is available either through LARTE’s own facilities in Germany or its network of partner ateliers worldwide, giving owners a body kit engineered specifically for their car rather than adapted from a shared-platform template.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

LARTE Design Side Skirt Set for Lamborghini Urus SE

Guaranteed Safe Checkout

LARTE Design Side Skirt Set for Lamborghini Urus SE

Carbon Fiber and Basalt: The Materials Behind Every Urus Kit

LARTE Design

Features

Applications

More LARTE Design for Lamborghini Urus SE

Notes

Frequently Asked Questions

About LARTE Design

Reviews