Will the Front Splitter for ZN8 fit a Subaru BRZ?

No. The Front Splitter for ZN8 is shaped for the Toyota GR86 front bumper. Verus Engineering builds a separate splitter for the 2022 and later Subaru BRZ, whose bumper differs and whose kit adds four tie rod extensions. The GR86 version is designed for the standard factory bumper, not aftermarket bumper covers.

What is the splitter blade made from?

Verus Engineering uses a hard, durable and stiff plastic. Unlike aluminum, it does not bend and pull beneath the car when it meets the ground, and it resists cracking when hit from below, which suits a car that sees steep driveways as well as track curbs. Hardware is stainless, and the splitter is made in the U.S.A.

Which Verus splitter suits my GR86, the one-piece or the two-piece?

The one-piece splitter leads the Verus Engineering Ventus 2 package and balances larger rear aero such as the High-Efficiency Rear Wing. The two-piece splitter was designed with the Verus rear diffuser for Ventus 1, includes a tie kit for rigidity and lets you replace one damaged half. Choose by the rear aero you run or plan to add.

Does the front splitter improve fuel economy?

Yes, according to Verus Engineering, which lists better gas mileage among the results of the drag reduction. Its main job is grip: cutting front-end lift adds downforce and traction at high speed. Verus has not published a mileage figure for the GR86, so treat any economy gain as a side benefit.

Is the Verus front splitter hard to install?

No. Verus Engineering describes a simple bolt-on installation. The blade locates on two support rods with four clevises and a support brace, all secured with stainless hardware from the kit, and Verus publishes an informative packet, an install manual and an install video for the GR86.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Verus Engineering Front Splitter for ZN8 Toyota GR86

Verus Engineering’s Front Splitter for ZN8 Toyota GR86 tackles front-end lift with a single hard plastic blade that bolts beneath the factory bumper, adding downforce and high-speed traction while trimming drag. The material is the point: a stiff, durable plastic that will not fold under the car like aluminum and resists cracking when struck from below. Verus confirmed in analysis that it balances the car with each Ventus package, so it suits a GR86 heading for its first wing or already wearing a diffuser.

GR86 Only

Shaped from OEM CAD data for the standard GR86 front bumper, this splitter does not fit the BRZ, whose nose differs; BRZ owners need the Verus BRZ version listed in Notes. The blade mounts on two support rods with four clevises and a support brace, and Verus makes it in the U.S.A.

Features

Hard, stiff plastic blade that resists cracking from underneath impacts
Will not pull under the car like an aluminum splitter
Reduces front lift for more grip at speed
CFD-tested design with a near-OEM fit
Simple bolt-on installation with stainless hardware

What’s Included

Front splitter blade
Splitter support rods (x2)
Splitter support clevises (x4)
Splitter support brace
Hardware kit with all hardware needed for the install

Applications

Toyota GR86: ZN8 | 2022-present

Notes

Fits the GR86 with its standard factory front bumper only; for the BRZ, choose the Front Splitter for ZD8 Subaru BRZ
The Front Splitter for ZN8 is the front element of the Verus Ventus 2 package with the High-Efficiency Rear Wing Kit
Verus also builds the Two-Piece Front Splitter for ZN8 Toyota GR86, designed with the Rear Diffuser for Ventus 1, with halves that can be replaced individually
Install documentation from Verus covers the job: an informative packet, an install manual and an install video
See every Verus Engineering part for the ZN8 Toyota GR86
Verus covers its parts with a 1-year limited warranty against manufacturing defects

Frequently Asked Questions

Will the Front Splitter for ZN8 fit a Subaru BRZ? No. The Front Splitter for ZN8 is shaped for the Toyota GR86 front bumper. Verus Engineering builds a separate splitter for the 2022 and later Subaru BRZ, whose bumper differs and whose kit adds four tie rod extensions. The GR86 version is designed for the standard factory bumper, not aftermarket bumper covers.
What is the splitter blade made from? Verus Engineering uses a hard, durable and stiff plastic. Unlike aluminum, it does not bend and pull beneath the car when it meets the ground, and it resists cracking when hit from below, which suits a car that sees steep driveways as well as track curbs. Hardware is stainless, and the splitter is made in the U.S.A.
Which Verus splitter suits my GR86, the one-piece or the two-piece? The one-piece splitter leads the Verus Engineering Ventus 2 package and balances larger rear aero such as the High-Efficiency Rear Wing. The two-piece splitter was designed with the Verus rear diffuser for Ventus 1, includes a tie kit for rigidity and lets you replace one damaged half. Choose by the rear aero you run or plan to add.
Does the front splitter improve fuel economy? Yes, according to Verus Engineering, which lists better gas mileage among the results of the drag reduction. Its main job is grip: cutting front-end lift adds downforce and traction at high speed. Verus has not published a mileage figure for the GR86, so treat any economy gain as a side benefit.
Is the Verus front splitter hard to install? No. Verus Engineering describes a simple bolt-on installation. The blade locates on two support rods with four clevises and a support brace, all secured with stainless hardware from the kit, and Verus publishes an informative packet, an install manual and an install video for the GR86.

About Verus Engineering

Verus Engineering designs aerodynamic and performance parts in Indianapolis, Indiana. Two engineers founded it in late 2014 as Velox Motorsports and renamed it in 2017 after a trademark dispute; verus is Latin for true or complete. Each design starts from a 3D scan of the car, is developed with CFD and finite element analysis and is validated on track, across more than 20 platforms from the GR86 to the C8 Corvette.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Verus Engineering Front Splitter for ZN8 Toyota GR86 [A0433A]

Guaranteed Safe Checkout

Verus Engineering Front Splitter for ZN8 Toyota GR86

GR86 Only

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Verus Engineering

Reviews