Can I fit the Front Splitter for ZD8 to a GR86?

No. The Front Splitter for ZD8 is built around the front bumper of the 2022 and later Subaru BRZ, which differs from the Toyota GR86 bumper, and its kit includes four tie rod extensions for this version. Verus Engineering sells a separate front splitter for the GR86, so order the one made for your car.

Why is the BRZ splitter plastic and not aluminum?

Verus Engineering chose a hard, durable and stiff plastic because it holds its shape under load yet will not bend and pull beneath the car the way aluminum can after a hard strike. It also resists cracking when hit from below, so it tolerates the scrapes a BRZ meets on driveways and track curbs.

What rear aero should I pair with the BRZ front splitter?

Verus Engineering places this splitter at the front of its BRZ Ventus 2 package, where it balances the High-Efficiency Rear Wing. Verus also calls it a good match for various rear aero devices and analyzed it with each Ventus package, so it can lead a build that starts with a diffuser and adds a wing later.

Does the splitter reduce lap times?

Yes, according to Verus Engineering, which lists lower lap times among the results of cutting front-end lift. More front downforce improves traction at high speed and lets the BRZ carry more speed through fast corners. Verus publishes no lap time figure for the car, so the gain depends on circuit and setup.

What comes in the BRZ front splitter kit?

The kit contains the splitter blade, two support rods, four support clevises, four tie rod extensions, a support brace and a hardware kit with every fastener needed. Verus Engineering uses stainless hardware throughout, makes the splitter in the U.S.A. and covers the install with a packet, manual and video.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Verus Engineering Front Splitter for ZD8 Subaru BRZ

Verus Engineering’s Front Splitter for ZD8 Subaru BRZ gives the 2022 and later BRZ a working aero surface under the nose: one hard plastic blade that presses the front down for traction at high speed and reduces drag. The plastic is stiff and durable, so it neither bends under the car like aluminum nor cracks easily when hit from below. Verus analyzed it against each of its Ventus packages, and it forms the front of Ventus 2 for the BRZ, the right choice when a rear wing is in the plan.

Made for the BRZ

Subaru gave the ZD8 its own front bumper, so Verus builds this splitter separately from the GR86 version, shapes it from OEM CAD data and adds four tie rod extensions to the kit. GR86 owners need the Verus GR86 splitter linked in Notes instead.

Features

Durable, stiff plastic blade that shrugs off underside strikes
Holds its shape where an aluminum blade would fold beneath the car
Cuts front-end lift and improves overall aerodynamic efficiency
CFD-tested shape with a near-OEM fit
Stainless hardware throughout, made in the U.S.A.

What’s Included

Front splitter blade
Splitter support rods (x2)
Splitter support clevises (x4)
Splitter tie rod extensions (x4)
Splitter support brace
Hardware kit with all hardware needed for installation

Applications

Subaru BRZ: ZD8 | 2022-present

Notes

Made for the 2022 and later Subaru BRZ only; the GR86 uses the Front Splitter for ZN8 Toyota GR86
The Front Splitter for ZD8 is the front element of the Verus Ventus 2 package for the BRZ, with the High-Efficiency Rear Wing Kit
For a lower-cost option with replaceable halves, see the Two-Piece Front Splitter for ZD8 Subaru BRZ
Bolt-on installation, covered by a Verus informative packet, install manual and install video
See every Verus Engineering part for the ZD8 Subaru BRZ
Verus covers its parts with a 1-year limited warranty against manufacturing defects

Frequently Asked Questions

Can I fit the Front Splitter for ZD8 to a GR86? No. The Front Splitter for ZD8 is built around the front bumper of the 2022 and later Subaru BRZ, which differs from the Toyota GR86 bumper, and its kit includes four tie rod extensions for this version. Verus Engineering sells a separate front splitter for the GR86, so order the one made for your car.
Why is the BRZ splitter plastic and not aluminum? Verus Engineering chose a hard, durable and stiff plastic because it holds its shape under load yet will not bend and pull beneath the car the way aluminum can after a hard strike. It also resists cracking when hit from below, so it tolerates the scrapes a BRZ meets on driveways and track curbs.
What rear aero should I pair with the BRZ front splitter? Verus Engineering places this splitter at the front of its BRZ Ventus 2 package, where it balances the High-Efficiency Rear Wing. Verus also calls it a good match for various rear aero devices and analyzed it with each Ventus package, so it can lead a build that starts with a diffuser and adds a wing later.
Does the splitter reduce lap times? Yes, according to Verus Engineering, which lists lower lap times among the results of cutting front-end lift. More front downforce improves traction at high speed and lets the BRZ carry more speed through fast corners. Verus publishes no lap time figure for the car, so the gain depends on circuit and setup.
What comes in the BRZ front splitter kit? The kit contains the splitter blade, two support rods, four support clevises, four tie rod extensions, a support brace and a hardware kit with every fastener needed. Verus Engineering uses stainless hardware throughout, makes the splitter in the U.S.A. and covers the install with a packet, manual and video.

About Verus Engineering

Verus Engineering designs aerodynamic and performance parts in Indianapolis, Indiana. Two engineers founded it in late 2014 as Velox Motorsports and renamed it in 2017 after a trademark dispute; verus is Latin for true or complete. Each design starts from a 3D scan of the car, is developed with CFD and finite element analysis and is validated on track, across more than 20 platforms from the GR86 to the C8 Corvette.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Verus Engineering Front Splitter for ZD8 Subaru BRZ [A0614A]

Guaranteed Safe Checkout

Verus Engineering Front Splitter for ZD8 Subaru BRZ

Made for the BRZ

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Verus Engineering

Reviews