What does MAP-based control mean on the BPC MAP Harness for R35?

It means the Injector Dynamics BPC controller sets fuel pump speed from a 7-bar MAP sensor in the engine bay, which reads manifold pressure. The T1 BPC MAP Harness for R35 carries a long lead from the controller to that sensor. T1 Race Development also offers a PWM harness for setups where the ECU drives the controller.

Is the MAP sensor included?

No. The harness includes the lead and connector for the sensor, but the 7-bar MAP sensor itself is a separate purchase, as is the GT1R E5LM hanger. The Injector Dynamics FPS1100 pump system can be added to this listing by choosing Harness with FPS1100.

Where does the BPC controller mount?

T1 Race Development designed the harness around a controller on the back of the factory rear bulkhead or close by in the trunk, and it can also be built for mounting under the passenger seat. The two locations need different lengths, so choose the location when ordering.

How does the harness connect to the car?

T1 Race Development uses the factory fuel pump connector for pump control and diagnostics, so the control side plugs into the existing connector. Power for the controller comes from the main power supply section of the harness. T1 publishes installation instructions on its support site.

Does this harness fit a Radium hanger?

No. This version is built for the GT1R E5LM hanger. T1 Race Development makes a separate MAP harness for the Radium E5LM hanger, with the same MAP-based control and the same 7-bar sensor lead, so choose the harness that matches the hanger in the car.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

T1 Race Development GT1R BPC MAP Harness for R35 Nissan GT-R

T1 Race Development’s GT1R BPC MAP Harness for R35 Nissan GT-R makes installing an Injector Dynamics FPS1100 in the GT1R E5LM hanger about as simple as fuel pump wiring gets. One loom covers the supply side of the controller and its speed control, and this version reads manifold pressure from a dedicated 7-bar MAP sensor in the engine bay to decide how fast the pump runs.

Design and Performance

T1 designed the harness around a BPC controller mounted on the back of the factory rear bulkhead or close by in the trunk, or under the passenger seat, with the length made to suit. It plugs into the factory fuel pump connector for pump control and diagnostics, so the control side plugs straight into the car. A long lead runs forward from the controller to the engine bay, where the 7-bar MAP sensor connects.

Features

Main power supply through to BPC speed control in one harness
MAP-based pump speed control
Uses the factory fuel pump connector for control and diagnostics
Long lead to the engine bay for a 7-bar MAP sensor
Built for the GT1R E5LM hanger

What’s Included

GT1R BPC MAP harness with engine bay MAP sensor lead
Injector Dynamics FPS1100 pump system, Harness with FPS1100 version only

Applications

Nissan GT-R: R35 | 2009-2024 | 3.8L VR38DETT V6

Notes

The 7-bar MAP sensor is not included
The Injector Dynamics FPS1100 pump and controller is not in the base price; choose Harness with FPS1100 to add it, and the BPC MAP Harness for R35 is designed for the T1 Race Development GT1R E5LM Fuel Pump Hanger (GT1R E5LM Hanger)
Choose the BPC mounting location when ordering, because T1 builds the harness length to suit the trunk or the passenger seat
Cars where the ECU will command the pump should look at the T1 Race Development GT1R BPC PWM Harness (GT1R BPC Harness)

Frequently Asked Questions

What does MAP-based control mean on the BPC MAP Harness for R35? It means the Injector Dynamics BPC controller sets fuel pump speed from a 7-bar MAP sensor in the engine bay, which reads manifold pressure. The T1 BPC MAP Harness for R35 carries a long lead from the controller to that sensor. T1 Race Development also offers a PWM harness for setups where the ECU drives the controller.
Is the MAP sensor included? No. The harness includes the lead and connector for the sensor, but the 7-bar MAP sensor itself is a separate purchase, as is the GT1R E5LM hanger. The Injector Dynamics FPS1100 pump system can be added to this listing by choosing Harness with FPS1100.
Where does the BPC controller mount? T1 Race Development designed the harness around a controller on the back of the factory rear bulkhead or close by in the trunk, and it can also be built for mounting under the passenger seat. The two locations need different lengths, so choose the location when ordering.
How does the harness connect to the car? T1 Race Development uses the factory fuel pump connector for pump control and diagnostics, so the control side plugs into the existing connector. Power for the controller comes from the main power supply section of the harness. T1 publishes installation instructions on its support site.
Does this harness fit a Radium hanger? No. This version is built for the GT1R E5LM hanger. T1 Race Development makes a separate MAP harness for the Radium E5LM hanger, with the same MAP-based control and the same 7-bar sensor lead, so choose the harness that matches the hanger in the car.

About T1 Race Development

T1 Race Development was founded in Texas in 2005 by Tony Palo, whose 2000 Acura Integra GSR became the first eight-second front-wheel-drive street car before the shop turned its attention to the Nissan GT-R. T1 went on to become the first to exceed 230 mph in the half mile in a GT-R and the first to make 2,400 whp from the VR38DETT, and it now develops engines, drivetrain parts and complete builds for the R35 GT-R, Lamborghini Huracan and Audi R8.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

T1 Race Development GT1R BPC MAP Harness for R35 Nissan GT-R

Guaranteed Safe Checkout

T1 Race Development GT1R BPC MAP Harness for R35 Nissan GT-R

Design and Performance

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About T1 Race Development

Reviews