Is the DSC Sport V1 controller included with this kit?

No. The DSC Sport V1 controller is required for the elec-TRON R3 to function and is sold separately. Without it, the electronic damping system cannot operate. The V1 replaces the factory shock controller and interfaces directly with the R8's factory dash display and controls, so all factory functionality is retained.

What does the DSC Sport V1 controller offer over a standard suspension setup?

The V1 is fully user-definable, processing brake pressure, g-force, acceleration, steering inputs, and vehicle speed simultaneously to determine the correct damping level in real time. Full individual shock calibration tables give drivers and engineers the ability to digitally tune the chassis; more grip for the track, more compliance for the street. The factory interface stays fully intact, so the driving experience from behind the wheel is seamless.

How does the elec-TRON R3 differ from the NTR-R3 for the 4S R8?

The NTR-R3 uses fully manual 3-way independent damping adjustment. The elec-TRON R3 keeps that manual compression adjustment capability via the remote hose mounted reservoirs but adds Nitron's proportional solenoid valve and DSC Sport V1-controlled active damping on top of it, providing real-time electronic damping control alongside the manual setup capability.

How does the elec-TRON R3 differ from the elec-TRON R1 for the 4S R8?

Both kits use Nitron's proportional solenoid valve and DSC Sport V1-controlled electronic damping, but the elec-TRON R3 adds independent manual compression adjustment via remote hose mounted reservoirs, giving drivers and engineers direct control over high and low speed compression on top of the active electronic damping. The elec-TRON R1 handles all damping electronically without that manual compression adjustment capability, making it the more streamlined of the two.

Are droplinks included with the kit?

No, droplinks are not included. The kit consists of four coilovers, reservoirs, hoses, and adjustable top mounts covering front and rear.

Is the Nitron elec-TRON R3 serviceable after purchase?

Yes. Every elec-TRON R3 kit is fully serviceable. Nitron hand-builds each unit to order, and the design supports long-term maintenance rather than requiring full replacement when performance eventually needs refreshing.

Nitron elec-TRON R3 Coilover Kit for 4S Audi R8

The Nitron elec-TRON R3 coilover kit for the 4S Audi R8 combines electronic damping control through Nitron’s proportional solenoid valve with independent manual compression adjustment, giving drivers and engineers control over both the active and mechanical sides of the damping setup. Remote hose mounted reservoirs allow for straightforward independent adjustment of high and low speed compression, while the elec-TRON DSC Sport V1 controller handles overall damping in real time; note that the V1 is required and sold separately. Adjustable top mounts and race springs are included, and the kit is built for drivers who want to extract the most from the 4S R8’s second-generation mid-engine platform on road or track without leaving performance on the table.

elec-TRON

Nitron’s elec-TRON system is built around a proprietary proportional solenoid valve fitted to each shock individually, giving the elec-TRON DSC Sport V1 controller precise, independent damping control at every corner of the car. Brake pressure, g-force, acceleration, steering inputs, and vehicle speed are all monitored simultaneously, with damping adjustments made in real time. The suspension is responding to what the road and the driver are doing as it happens, not catching up after the fact.

Standalone Electronic Damping System

The elec-TRON DSC Sport V1 controller is required for the elec-TRON R3 kit on the 4S Audi R8 and is sold separately. It replaces the factory shock controller entirely, interfacing directly with the factory dash display and controls so nothing is lost from the driver’s perspective. Working in conjunction with Nitron’s elec-TRON valve, the V1 continuously processes brake pressure, g-force, acceleration, steering inputs, and vehicle speed to determine the correct valve position and damping level at any given moment. The result is a fully user-definable suspension platform that isn’t locked to a fixed damping rate; the driver can digitally tune the chassis the same way they would tune an engine, dialing in more grip for the track or a more compliant setup for the street. Full individual shock calibration tables give experienced drivers and engineers the depth to develop a setup properly, while the factory interface keeps the experience seamless from behind the wheel.
- Supplied with a custom or universal wiring harness
- Utilizes Arm Cortex-M4 processor
- Independent control of 4 electronic dampers
- 6 position rotary control switch or visual rotary display and control allows user to access a number of pre-installed damping maps (3 passive / 3 adaptive)
- Two 3 axis accelerometers
- 3 axis gyroscope
- 200Hz damping control rate
- Configured for application location and settings
- Ideal for resto-mod applications
- Fully resin bonded

Specialized Bi-Axis Hose Fittings

Nitron R3 Hose shocks use Nitron’s own 720 degree Bi-Axis fittings exclusively; a proprietary design that makes for clean, precise installation without the compromises that come with conventional end fittings.

Unique Technology

Nitron starts every shock with precision components that go through a thorough design and development process long before final assembly. The modular construction gives engineers the flexibility to approach each application on its own terms, without compromising part quality or how components perform together under real load. Everything is machined to tight tolerances and inspected individually by trained technicians; that standard of quality control runs through every stage of production, not just the end of it. New materials, finishes, and processes go through extensive validation before they’re adopted, with proprietary Nitron technologies built in throughout to produce shocks that consistently hold up against the competition on road and track. That’s the engineering foundation the brand has been built on since 1998.
- Basic Damper Design:
  1. End Eye / Top Mount
  2. Damper Piston & Shim Stack
  3. Shaft / Rod
  4. Floating / Separator Piston
  5. Suspension Oil
  6. Compressed Nitrogen Gas

Bespoke Engineering

Nitron doesn’t adapt a generic damper to fit a car; they engineer one around it. Every application goes through a dedicated development process where components, spring rates, and damping characteristics are shaped by the specific platform, not carried over from something similar enough to work. The geometry, weight distribution, and suspension travel of the vehicle are part of the design from day one, not corrections introduced later. That’s the difference between suspension that works with a car and suspension that was purpose-built for it.

Features

Hose reservoir types
No manual damping adjustments, fully controlled by the solenoid valve
Preload adjuster
Full alloy body
Consists of 4 coilovers, reservoirs, hoses, and adjustable top mounts
Hand made to order

Specifications

Coilover Type: elec-TRON R3
Reservoir Type: Hose
Rear Suspension Type: OEM
Droplinks Included: No
Recommended Spring Rates: N/A (requires Nitron elec-TRON DCS Sport V1 Controller to work)

Applications

Audi R8: 4S | 2016-2024
Audi R8 RWD: 4S | 2018-2024

Other Suspension Kits for the Audi R8 (4S)

Notes

This kit requires the Nitron elec-TRON DCS Sport V1 Controller to work
Images used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

Frequently Asked Questions

Is the DSC Sport V1 controller included with this kit? No. The DSC Sport V1 controller is required for the elec-TRON R3 to function and is sold separately. Without it, the electronic damping system cannot operate. The V1 replaces the factory shock controller and interfaces directly with the R8’s factory dash display and controls, so all factory functionality is retained.
What does the DSC Sport V1 controller offer over a standard suspension setup? The V1 is fully user-definable, processing brake pressure, g-force, acceleration, steering inputs, and vehicle speed simultaneously to determine the correct damping level in real time. Full individual shock calibration tables give drivers and engineers the ability to digitally tune the chassis; more grip for the track, more compliance for the street. The factory interface stays fully intact, so the driving experience from behind the wheel is seamless.
How does the elec-TRON R3 differ from the NTR-R3 for the 4S R8? The NTR-R3 uses fully manual 3-way independent damping adjustment. The elec-TRON R3 keeps that manual compression adjustment capability via the remote hose mounted reservoirs but adds Nitron’s proportional solenoid valve and DSC Sport V1-controlled active damping on top of it, providing real-time electronic damping control alongside the manual setup capability.
How does the elec-TRON R3 differ from the elec-TRON R1 for the 4S R8? Both kits use Nitron’s proportional solenoid valve and DSC Sport V1-controlled electronic damping, but the elec-TRON R3 adds independent manual compression adjustment via remote hose mounted reservoirs, giving drivers and engineers direct control over high and low speed compression on top of the active electronic damping. The elec-TRON R1 handles all damping electronically without that manual compression adjustment capability, making it the more streamlined of the two.
Are droplinks included with the kit? No, droplinks are not included. The kit consists of four coilovers, reservoirs, hoses, and adjustable top mounts covering front and rear.
Is the Nitron elec-TRON R3 serviceable after purchase? Yes. Every elec-TRON R3 kit is fully serviceable. Nitron hand-builds each unit to order, and the design supports long-term maintenance rather than requiring full replacement when performance eventually needs refreshing.

About Nitron Suspension

Nitron Suspension has been at the forefront of precision suspension engineering since 1998, founded by Guy Evans with the goal of building high-performance shocks for enthusiasts and professionals alike. Over 200 dealers now carry Nitron products across Europe, Asia, the US, Australasia, and Africa. In 2008, the company moved into a dedicated facility in the UK’s Motorsport Valley, adding dynamometers, 5-axis CNC machines, and 3D CAD capabilities to support both growing demand and continued product development. A second expansion came in 2023 with a new office in Murrieta, California. The team behind every Nitron product draws from deep backgrounds in machining, materials technology, hydraulics, bike engineering, and F1 racing, with many engineers bringing firsthand experience as competitive drivers and riders. That depth of knowledge across both the technical and competitive sides of motorsport shapes every product Nitron develops.

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Nitron elec-TRON R3 Coilover Kit for 4S Audi R8 [NTCAU012ER3]

Guaranteed Safe Checkout