Will it fit my S2000 with the stock hood?

No. The duct cannot be fitted under the stock hood, and trimming the hood underside does not change that. It needs the Type-V vented hood from the same Osaka tuner or a Mugen carbon hood, neither of which is included. For a stock hood, choose the Type-N carbon duct made for it.

Does the Type-V Air Duct for AP1 cars also fit the AP2?

Yes. The Type-V Air Duct for AP1 cars is listed for every S2000 from 1999 to 2009, both AP1 and AP2. On later cars, including the AP2, the front performance rod inside the bumper must come out during installation, and every car needs the factory air guide cut.

Do I need an aftermarket intake to use it?

No. The duct is designed to work with the factory air cleaner box, so it can be added to an otherwise stock intake system. It routes cooler fresh air toward the box, and the manufacturer says the denser air it delivers reliably adds power.

How much power does it add?

The manufacturer states that cooler, denser intake air reliably increases power, but it does not publish a horsepower figure or test data for this duct. Treat it as one part of a balanced setup, since the maker develops intake, exhaust and ignition improvements to work together.

Is it suitable for track use?

Yes. The manufacturer describes the duct as usable at any stage, from daily street driving to circuit sessions. Its purpose is the same in both settings, supplying the factory air box with cooler fresh air than it would otherwise draw from around the engine.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

J’s Racing Type-V Air Duct for AP1 / AP2 Honda S2000

J’s Racing’s Type-V Air Duct for AP1 and AP2 S2000s is a carbon intake duct for cars running the company’s Type-V vented hood or a Mugen carbon hood, and it works with the factory air cleaner box. Its job is to feed the engine cooler, denser fresh air, which the Osaka tuner says reliably adds power. J’s Racing made it wider than the Type-N duct intended for stock hoods, and that extra width is why it only suits those two hoods. If your S2000 still wears the factory hood, look elsewhere: this duct will not fit even with the hood underside cut.

Design and Performance

J’s Racing develops its engine parts to raise intake, exhaust and ignition efficiency in balance, and this duct is its answer for the intake side on a car that already carries a vented or carbon hood. The company rates it for any stage of use, from daily street driving through to circuit sessions, and lists it as made to order in Japan.

Features

Wider duct than the Type-N version, sized for the Type-V and Mugen carbon hoods
Carbon construction, listed as CFRP by the US distributor
Works with the factory air cleaner box
Supplies cooler, denser intake air
Usable from street driving to circuit sessions

Applications

Honda S2000: AP1 | 1999-2003 | 2.0L F20C
Honda S2000: AP2 | 2004-2009 | 2.2L F22C

Notes

Requires the J’s Racing Type-V hood or a Mugen carbon hood, and neither is included
Not compatible with the stock hood, even with the hood underside trimmed
Installation involves cutting the factory air guide
On later cars, which J’s Racing identifies by the Japanese model codes AP1-130, AP1-135, AP1-200 and AP2, the front performance rod inside the bumper must be removed
Pair it with the Type-V Vented Hood for the AP1 / AP2 Honda S2000
For a stock hood, the Type-N Air Duct for the AP1 / AP2 Honda S2000 is the correct part
Made to order in Japan; Bulletproof Automotive confirms the lead time with J’s Racing USA once you order

Frequently Asked Questions

Will it fit my S2000 with the stock hood? No. The duct cannot be fitted under the stock hood, and trimming the hood underside does not change that. It needs the Type-V vented hood from the same Osaka tuner or a Mugen carbon hood, neither of which is included. For a stock hood, choose the Type-N carbon duct made for it.
Does the Type-V Air Duct for AP1 cars also fit the AP2? Yes. The Type-V Air Duct for AP1 cars is listed for every S2000 from 1999 to 2009, both AP1 and AP2. On later cars, including the AP2, the front performance rod inside the bumper must come out during installation, and every car needs the factory air guide cut.
Do I need an aftermarket intake to use it? No. The duct is designed to work with the factory air cleaner box, so it can be added to an otherwise stock intake system. It routes cooler fresh air toward the box, and the manufacturer says the denser air it delivers reliably adds power.
How much power does it add? The manufacturer states that cooler, denser intake air reliably increases power, but it does not publish a horsepower figure or test data for this duct. Treat it as one part of a balanced setup, since the maker develops intake, exhaust and ignition improvements to work together.
Is it suitable for track use? Yes. The manufacturer describes the duct as usable at any stage, from daily street driving to circuit sessions. Its purpose is the same in both settings, supplying the factory air box with cooler fresh air than it would otherwise draw from around the engine.

About J’s Racing

J’s Racing was established in Osaka in 1989, as VTEC engines and lightweight Civics and Integras were changing what a Honda could do, and it has built parts for Hondas ever since. The company develops engine response, suspension, braking, cooling and aerodynamics together as one system, then proves the parts in time attack, gymkhana, endurance and circuit racing. Its Fit lapped Tsukuba Circuit in 1’00.459, and its naturally aspirated AP1 S2000, the Maou car, became the company’s reference build for the Honda roadster. Every J’s Racing part is designed and tested in Japan, and J’s Racing USA in Carson, California handles distribution in the United States.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

J’s Racing Type-V Air Duct for AP1 / AP2 Honda S2000 [AID-S1-V]

Guaranteed Safe Checkout

J’s Racing Type-V Air Duct for AP1 / AP2 Honda S2000

Design and Performance

Features

Applications

Notes

Frequently Asked Questions

About J’s Racing

Reviews