Will the 71 GT-250 universal wing fit my car?

The wing mounts on flat aluminum bottom plates rather than plates shaped to one trunk lid, so it suits most track and high performance street cars with a solid rear deck. Where APR makes a vehicle-specific GT-250 kit for your car, that kit fits more cleanly.

What mounting width should be given with the order?

APR sets the pedestals to the mounting distance supplied by the customer. If no distance is given, the pedestals are set 47in apart. Measure across the rear deck at the points where the pedestals will sit, center to center, and send that figure with the order.

Is the Gurney flap included?

Yes. APR fits a half inch (12.7mm) pre-preg carbon Gurney flap to the trailing edge of every GT-250 before it ships, bonded with 3M VHB tape. It adds downforce and reduces flow separation off the back of the wing, so there is nothing extra to buy or install.

Which span is right, 61in, 67in or 71in?

The 71in version is the widest of the three universal GT-250 spans and suits wider cars. APR designs the GT-250 around compact performance cars, so on a narrow hatchback or roadster the 61in or 67in version is usually the better proportion.

What angle range and pedestal heights are available?

The angle of attack adjusts from 0 to 15 degrees, with flatter settings for long straights and steeper ones for braking zones and slow corners. The page lists pedestal heights of 8in, 11in and 14in (203mm, 279mm and 355mm), so confirm the height you need with our team before ordering.

How long does delivery take?

The wing is made to order or special order from the manufacturer, so it is not typically in stock. After you order, we confirm the estimated lead time and other order details. Talk to us first if you have a specific deadline.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

APR Performance Carbon GT-250 Universal Adjustable Wing (71in) [AS-207157]

The 71 GT-250 universal wing from APR Performance brings the same 2D airfoil APR fits to its vehicle-specific kits to any car with a solid rear deck, here at the full 71in (1803mm) span. APR refined the profile in CFD to hold an even level of downforce from endplate to endplate, then lays each airfoil up in pre-preg carbon, autoclave-cured in aluminum billet molds, with a carbon Gurney flap bonded to the trailing edge before it ships. It is built for time attack cars, track builds and serious street cars; a car that never sees a circuit will carry it more for the look than the lap time.

Pedestals and Mounting

The pedestals are machined from 10mm 6061 billet aluminum and finished in flat black powder coat, and they sit on aluminum bottom plates. The angle of attack adjusts from 0 to 15 degrees: flatter for long straights, steeper for braking zones and slow corners.

Features

2D airfoil developed in CFD for even downforce across the span
Woven pre-preg 3K carbon in a 2×2 twill, autoclave-cured in billet molds
UV-stable clear coat finish
Pre-installed carbon Gurney flap on the trailing edge
Stainless steel hardware lets the endplates be turned to suit the car

What’s Included

GT-250 carbon airfoil, 71in, with Gurney flap fitted
Carbon endplates (x2)
6061 billet aluminum pedestals (x2)
Aluminum universal bottom plates
Stainless steel mounting hardware

Notes

Supply your pedestal mounting distance with the order; without one, APR sets the pedestals 47in apart
Also offered in 61in and 67in spans, and as a 71in swan neck version
APR makes vehicle-specific GT-250 kits for many cars; see the full GT-250 range before choosing this GT-250 Universal Adjustable Wing
Made to order with a typical APR lead time of 1-2 weeks

Frequently Asked Questions

Will the 71 GT-250 universal wing fit my car? The wing mounts on flat aluminum bottom plates rather than plates shaped to one trunk lid, so it suits most track and high performance street cars with a solid rear deck. Where APR makes a vehicle-specific GT-250 kit for your car, that kit fits more cleanly.
What mounting width should be given with the order? APR sets the pedestals to the mounting distance supplied by the customer. If no distance is given, the pedestals are set 47in apart. Measure across the rear deck at the points where the pedestals will sit, center to center, and send that figure with the order.
Is the Gurney flap included? Yes. APR fits a half inch (12.7mm) pre-preg carbon Gurney flap to the trailing edge of every GT-250 before it ships, bonded with 3M VHB tape. It adds downforce and reduces flow separation off the back of the wing, so there is nothing extra to buy or install.
Which span is right, 61in, 67in or 71in? The 71in version is the widest of the three universal GT-250 spans and suits wider cars. APR designs the GT-250 around compact performance cars, so on a narrow hatchback or roadster the 61in or 67in version is usually the better proportion.
What angle range and pedestal heights are available? The angle of attack adjusts from 0 to 15 degrees, with flatter settings for long straights and steeper ones for braking zones and slow corners. The page lists pedestal heights of 8in, 11in and 14in (203mm, 279mm and 355mm), so confirm the height you need with our team before ordering.
How long does delivery take? The wing is made to order or special order from the manufacturer, so it is not typically in stock. After you order, we confirm the estimated lead time and other order details. Talk to us first if you have a specific deadline.

About APR Performance

Since 1999, APR Performance has crafted aerodynamic performance components for the aftermarket automotive sector. Products are developed with computational fluid dynamics analysis and tested on track against performance specifications. APR’s proprietary manufacturing processes use pre-impregnated carbon fiber composites to make parts that are sturdy, light, and premium in quality.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

APR Performance Carbon GT-250 Universal Adjustable Wing (71in) [AS-207157]

Guaranteed Safe Checkout

APR Performance Carbon GT-250 Universal Adjustable Wing (71in) [AS-207157]

Pedestals and Mounting

Features

What’s Included

Notes

Frequently Asked Questions

About APR Performance