Will the ADRO GR Yaris Gen 2 Rear Diffuser fit my 2022 car?

No. The 2020 to 2023 Gen 1 GR Yaris takes A18A30-1301. This part is shaped for the revised bumper on the 2024 and later car.

Is it different from the Gen 1 diffuser apart from fitment?

It does the same aerodynamic job. What differs is the mounting geometry and the profile where it meets the bumper, both specific to the later car.

How does a diffuser create downforce?

It gives air leaving the underbody a controlled expansion, accelerating it and lowering pressure beneath the rear of the car, which pulls the rear axle toward the road.

What is the ADRO GR Yaris Gen 2 Rear Diffuser made from?

Hand laid wet carbon fiber, shaped to the Gen 2 rear bumper so it installs without modification.

Is it bonded or bolted?

Both, using the supplied 3M tape and screws. The mechanical fixing matters because a diffuser carries real aerodynamic load.

The ADRO GR Yaris Gen 2 Rear Diffuser is a pre-order with ADRO fulfilment scheduled for early September 2026. Contact us for the latest date before you order.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

ADRO Carbon Rear Diffuser for Gen 2 Toyota GR Yaris

Toyota GAZOO Racing did not build the GR Yaris to be ordinary, and ADRO did not treat it as ordinary either. The full carbon body kit was developed with CFD to work with the homologation car’s existing aerodynamic platform, and ADRO reports approximately 165 lbs (+734N) of additional downforce for the complete kit at minimal drag cost. The ADRO GR Yaris Gen 2 Rear Diffuser is the version shaped for the revised rear bumper Toyota introduced on the 2024 car. Mechanically it does the same job as the Gen 1 part, replacing the factory valance and giving underbody air a controlled expansion on its way out, but the mounting geometry and the profile that meets the bumper are specific to the later car and the two are not interchangeable.

Where Downforce Gets Put To Work

The rear diffuser is where the underbody finally pays out. Air travelling beneath the car is accelerated as it exits through the diffuser’s expanding volume, and the low pressure that creates pulls the rear of the car toward the road. That is the whole mechanism, and it is why a diffuser improves high-speed stability and cornering confidence rather than just appearance. On a car as short as the GR Yaris the effect is welcome at the back, where a light rear end is the first thing to let go when the road opens up.

ADRO GR Yaris Gen 2 Rear Diffuser Construction and Fitting

The diffuser is hand laid wet carbon fiber, shaped to the Gen 2 rear bumper so it fits without modification, and it mounts with the supplied 3M tape and screws. The mechanical fixing matters on this part more than on a cosmetic panel, because a diffuser sits in fast-moving air and carries genuine aerodynamic load rather than simply occupying space in the airstream.

Features

3M tape and screws supplied
CFD developed as part of ADRO’s complete GR Yaris carbon kit
Expanding volume accelerates air leaving the underbody
Hand laid carbon fiber shaped to the Gen 2 rear bumper
Improves high-speed stability and cornering confidence
Mounts without modification, tape and screw fixing

What’s Included

3M tape (x1 set)
Rear diffuser (x1)
Screws (x1 set)

Applications

Toyota GR Yaris: Gen 2 | 2024-present

Complete the GR Yaris Aero

Gen 2 front lip (A18A31-1201)
Side skirts, Gen 1 and Gen 2 (A18A30-1401)
Carbon hood, Gen 1 and Gen 2 (A18A30-2401)

Notes

This is a pre-order. ADRO fulfilment is scheduled for early September 2026 and your order is placed in that queue
Fits the Gen 2 GR Yaris only. The 2020 to 2023 Gen 1 car takes its own diffuser (A18A30-1301)
ADRO’s published 165 lbs figure is for the complete GR Yaris carbon kit, not for the diffuser on its own
The ADRO GR Yaris Gen 2 Rear Diffuser is sold as one rear diffuser
Need a delivery estimate before ordering? contact us.

Frequently Asked Questions

Will the ADRO GR Yaris Gen 2 Rear Diffuser fit my 2022 car? No. The 2020 to 2023 Gen 1 GR Yaris takes A18A30-1301. This part is shaped for the revised bumper on the 2024 and later car.
Is it different from the Gen 1 diffuser apart from fitment? It does the same aerodynamic job. What differs is the mounting geometry and the profile where it meets the bumper, both specific to the later car.
How does a diffuser create downforce? It gives air leaving the underbody a controlled expansion, accelerating it and lowering pressure beneath the rear of the car, which pulls the rear axle toward the road.
What is the ADRO GR Yaris Gen 2 Rear Diffuser made from? Hand laid wet carbon fiber, shaped to the Gen 2 rear bumper so it installs without modification.
Is it bonded or bolted? Both, using the supplied 3M tape and screws. The mechanical fixing matters because a diffuser carries real aerodynamic load.
When will it ship? The ADRO GR Yaris Gen 2 Rear Diffuser is a pre-order with ADRO fulfilment scheduled for early September 2026. Contact us for the latest date before you order.

About ADRO

ADRO is an aftermarket manufacturer specializing in carbon fiber aerodynamic components for modern performance and sports cars, with aero engineered by former F1 and OEM designers. ADRO develops its parts using CFD simulation with a focus on adding usable downforce at minimal drag cost while preserving each vehicle’s factory balance and lines, producing them in high-grade prepreg carbon fiber. Bulletproof Automotive carries ADRO’s aero program for enthusiasts looking to make their cars faster where it counts.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.