What is the ADRO 992.1 GT3 Lower Front Splitter made from?

It is laid up in prepreg carbon fiber and autoclave cured, which holds resin content and weave alignment more consistently than wet lay-up and produces a lighter part that stays dimensionally stable across a wide panel.

Do I have to buy the intake panel as well?

Yes. ADRO specifies this splitter with their carbon front intake panel (A23A10-1211) and it will not fit correctly against the OEM panel, so the two need to be ordered together.

Does it fit every 992.1 GT3?

ADRO lists it for all 992.1 GT3 trims. It is not designed for the 992.2 GT3, which uses a different front end.

How is the ADRO 992.1 GT3 Lower Front Splitter different from the ARD race splitter?

This is the street part, shaped for stance and clean airflow to the coolers. The ARD splitter is from ADRO Racing Division, has its geometry solved by adjoint CFD for a downforce target, and uses its own race intake panel. They are not interchangeable.

Does fitting it require cutting the bumper?

No. It is a full replacement for the factory lower valance and mounts to the existing points, so no cutting or permanent modification is needed.

How quickly does it ship?

ADRO lists the ADRO 992.1 GT3 Lower Front Splitter as shipping within one to three business days rather than made to order. Contact us if you need a firm date before ordering.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

ADRO Prepreg Carbon Lower Front Splitter for 992.1 Porsche 911 GT3

The ADRO 992.1 GT3 Lower Front Splitter is the street-programme answer to the 911 GT3’s front end: a full replacement for the factory lower valance that drops the nose closer to the road, widens the visual footprint and gives the 992.1 (all trims) the stance its engine deserves. It is laid up in prepreg carbon fiber and shaped to the GT3’s existing mounting points, so it bolts on without cutting and reads as a factory option rather than an addition. It ships with the matching left and right lower bumper trim mouldings, and it is designed to work with ADRO’s carbon front intake panel above it.

Design and Airflow

The splitter’s leading edge sits lower and further forward than the factory valance, which is what produces the harder stance, but the shape is not purely cosmetic. The sculpted lower surface and its intake cut-outs are laid out to feed air toward the GT3’s front coolers rather than stall in front of them, so the extra presence does not come at the cost of front-end cooling. The sharp, dynamic angles carry the same design language ADRO uses across its 992 programme.

ADRO 992.1 GT3 Lower Front Splitter Construction

The part is laid up in prepreg carbon fiber and autoclave cured, a process that holds resin content and weave alignment far more consistently than wet lay-up and produces a panel that is both lighter and more dimensionally stable than a conventional wet-laid equivalent. That consistency is what allows a part this wide to line up cleanly against the factory bumper along its whole length, and it is why the finish stays uniform across a large visible surface.

Features

Autoclave cured prepreg carbon fiber for consistent weave and dimensional stability
Designed to pair with the ADRO carbon front intake panel for a complete front end
Full OEM replacement for the factory lower valance, no cutting required
Intake cut-outs shaped to keep air moving toward the front coolers
Lower, wider leading edge for a reduced ride-height appearance
Mounts to the factory 992.1 GT3 bumper points
Supplied with matching left and right lower bumper trim mouldings

What’s Included

Lower bumper trim moulding, left and right (x2)
Lower front splitter in prepreg carbon fiber (x1)

Applications

Porsche 911 GT3: 992.1 | 2022-2024

Notes

Must be used with the ADRO carbon front intake panel (A23A10-1211) and is not compatible with the OEM intake panel
The ADRO 992.1 GT3 Lower Front Splitter is sold as one lower front splitter with left and right lower bumper trim mouldings
This is the street-programme splitter. The ARD race splitter (R23A10-1221) is a different part with its own intake panel and is not interchangeable with this one
Professional installation of the ADRO 992.1 GT3 Lower Front Splitter is recommended. For fitment questions on your car, contact us.

Frequently Asked Questions

What is the ADRO 992.1 GT3 Lower Front Splitter made from? It is laid up in prepreg carbon fiber and autoclave cured, which holds resin content and weave alignment more consistently than wet lay-up and produces a lighter part that stays dimensionally stable across a wide panel.
Do I have to buy the intake panel as well? Yes. ADRO specifies this splitter with their carbon front intake panel (A23A10-1211) and it will not fit correctly against the OEM panel, so the two need to be ordered together.
Does it fit every 992.1 GT3? ADRO lists it for all 992.1 GT3 trims. It is not designed for the 992.2 GT3, which uses a different front end.
How is the ADRO 992.1 GT3 Lower Front Splitter different from the ARD race splitter? This is the street part, shaped for stance and clean airflow to the coolers. The ARD splitter is from ADRO Racing Division, has its geometry solved by adjoint CFD for a downforce target, and uses its own race intake panel. They are not interchangeable.
Does fitting it require cutting the bumper? No. It is a full replacement for the factory lower valance and mounts to the existing points, so no cutting or permanent modification is needed.
How quickly does it ship? ADRO lists the ADRO 992.1 GT3 Lower Front Splitter as shipping within one to three business days rather than made to order. Contact us if you need a firm date before ordering.

About ADRO

ADRO is an aftermarket manufacturer specializing in carbon fiber aerodynamic components for modern performance and sports cars, with aero engineered by former F1 and OEM designers. ADRO develops its parts using CFD simulation with a focus on adding usable downforce at minimal drag cost while preserving each vehicle’s factory balance and lines, producing them in high-grade prepreg carbon fiber. Bulletproof Automotive carries ADRO’s aero program for enthusiasts looking to make their cars faster where it counts.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.