Does the PowerMax Stage 2 Right Turbo include the left side?

No. The PowerMax Stage 2 Right Turbo is the right turbocharger only, Garrett 901655-5001W. The left unit is 901654-5001W, and the complete Stage 2 pair is kit 911984-5003S. A single right turbo suits an owner repairing one side of a Stage 2 setup; an owner upgrading from the original turbos should buy the pair.

What hardware is inside this turbo?

Garrett builds it as a GT2260S with a fully machined 60mm billet compressor wheel, a tuned ported shroud, a 50mm Inconel turbine wheel and a 0.45 A/R turbine housing that is larger than stock. The rotating group runs on journal bearings, and the electric actuator is calibrated before shipping.

How much power does the Stage 2 upgrade support?

Garrett rates the pair of Stage 2 turbos at more than 700 horsepower, based strictly on the choke flow of the compressor map and representing potential flywheel power. That is a turbo capability figure. A truck reaches it only with fuel, supporting parts and calibration built for that level, and Garrett gives no separate figure per side.

Will the PowerMax Stage 2 Right Turbo fit my 2019 Raptor?

Yes. Garrett lists the Stage 2 turbos for the 2017-2020 F-150 and F-150 Raptor with the 3.5L EcoBoost, and this unit is outline interchangeable with the factory right turbo on those trucks. For 2021 and later models Garrett publishes no listing, so confirm fitment before ordering.

Do I need a speed sensor?

It is the practical way to respect the limit. Garrett sets maximum turbo speed at 176,000 rpm and warns that exceeding it is at the risk of the owner and can cause premature failure. A port is machined into the compressor housing for sensor kit 781328-0003 with gauge or 781328-0004 without one, both sold separately.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Garrett PowerMax Stage 2 Right Turbo for 2017-2020 Ford F-150 and Raptor 3.5L EcoBoost

Garrett’s PowerMax Stage 2 Right Turbo is the right-bank half of Garrett’s GT2260S Stage 2 upgrade for the 2017-2020 Ford F-150 and F-150 Raptor 3.5L EcoBoost, and this listing contains that one turbocharger only. Inside are the Stage 2 internals: a fully machined 60mm billet compressor wheel, a 50mm Inconel turbine wheel and a larger 0.45 A/R turbine housing, with the electric actuator already calibrated. Its job is to replace or complete the right side of a Stage 2 pair; for a truck still on two factory turbos, the matched kit is the correct order.

Features

Right-side GT2260S turbocharger, outline interchangeable with the factory right turbo
Calibrated electric actuator installed by Garrett
Inconel turbine wheel and 0.45 A/R housing for 52 percent more turbine flow than stock
Speed sensor port machined into the compressor housing

Specifications

Garrett turbo model: GT2260S
Compressor wheel: 60mm billet, fully machined
Turbine wheel: 50mm Inconel
Turbine housing A/R: 0.45
Bearing system: Journal bearing
Maximum turbocharger speed: 176,000 rpm

Applications

Garrett lists the PowerMax Stage 2 Right Turbo for these trucks:

Ford F-150: 2017-2020 | 3.5L EcoBoost
Ford F-150 Raptor: 2017-2020 | 3.5L EcoBoost

Notes

Right turbo only; the Stage 2 left turbo is a separate part, and both are packaged as the Stage 2 turbocharger upgrade kit
Garrett lists the stock inlet tube adapter with the two-turbo kit
Maximum allowable speed is 176,000 rpm; Garrett states that running above it is at the owner’s risk and can cause damage and premature failure
Speed sensors are not included; see Garrett speed sensor kits

Frequently Asked Questions

Does the PowerMax Stage 2 Right Turbo include the left side? No. The PowerMax Stage 2 Right Turbo is the right turbocharger only, Garrett 901655-5001W. The left unit is 901654-5001W, and the complete Stage 2 pair is kit 911984-5003S. A single right turbo suits an owner repairing one side of a Stage 2 setup; an owner upgrading from the original turbos should buy the pair.
What hardware is inside this turbo? Garrett builds it as a GT2260S with a fully machined 60mm billet compressor wheel, a tuned ported shroud, a 50mm Inconel turbine wheel and a 0.45 A/R turbine housing that is larger than stock. The rotating group runs on journal bearings, and the electric actuator is calibrated before shipping.
How much power does the Stage 2 upgrade support? Garrett rates the pair of Stage 2 turbos at more than 700 horsepower, based strictly on the choke flow of the compressor map and representing potential flywheel power. That is a turbo capability figure. A truck reaches it only with fuel, supporting parts and calibration built for that level, and Garrett gives no separate figure per side.
Will the PowerMax Stage 2 Right Turbo fit my 2019 Raptor? Yes. Garrett lists the Stage 2 turbos for the 2017-2020 F-150 and F-150 Raptor with the 3.5L EcoBoost, and this unit is outline interchangeable with the factory right turbo on those trucks. For 2021 and later models Garrett publishes no listing, so confirm fitment before ordering.
Do I need a speed sensor? It is the practical way to respect the limit. Garrett sets maximum turbo speed at 176,000 rpm and warns that exceeding it is at the risk of the owner and can cause premature failure. A port is machined into the compressor housing for sensor kit 781328-0003 with gauge or 781328-0004 without one, both sold separately.

About Garrett

Garrett Motion has turbocharged engines since 1955, when its T15 was matched to the Caterpillar D9 crawler, and in 1962 a Garrett turbocharger went into the Oldsmobile Jetfire Turbo Rocket, the first turbocharged production car. Garrett has supplied turbocharging in Formula 1 with Scuderia Ferrari, the FIA World Rally Championship and the 24 Hours of Le Mans. It has operated as a stand-alone company since 2018, and its technology is fitted to around 150 million vehicles worldwide.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Garrett PowerMax Stage 2 Right Turbo for 2017-2020 Ford F-150 and Raptor 3.5L EcoBoost [901655-5001W]

Guaranteed Safe Checkout

Garrett PowerMax Stage 2 Right Turbo for 2017-2020 Ford F-150 and Raptor 3.5L EcoBoost

Features

Specifications

Applications

Notes

Frequently Asked Questions

About Garrett

Reviews