What is not included with the bumper?

Paint, fitting work, duct hoses and the optional parts. The bumper ships in black gelcoat with aluminum mesh in the grille. The dedicated GT canards, the dedicated emblem and the special tow hook are separate options. Budget for a body shop to fit, prepare and paint the bumper.

Does the Type-S GT Bumper for GE cars fit the late model Fit?

No. The Type-S GT Bumper for GE cars is made for early model GE6, GE7, GE8 and GE9 Fits built up to September 2010, chassis numbers 1000001 to 1499999. Late model cars have a separate GT bumper designed for the facelifted GE8 RS.

Can I still mount a front license plate?

Yes. The manufacturer extended the nose by 10mm and designed it with license plate mounting in mind. Placement and hardware will depend on your plate bracket, so test fit the bracket before drilling anything once the bumper is painted and installed on the car.

Do the brake ducts work?

Yes. The ducts on each side are molded into the bumper and can act as air intakes as they are. The manufacturer shaped them all the way back so a small opening still captures cooling air. Fitting a duct hose routes that air to the brakes to help prevent fade.

Will it scrape on a lowered car?

The manufacturer designed the wing-shaped under panel to keep ground clearance, so the bumper clears circuit curbs and remains easy to live with on the street. How close it sits to the ground still depends on your ride height and driveway angles.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

J’s Racing Type-S GT Bumper for GE Honda Fit Early Model

J’s Racing’s Type-S GT Bumper for GE Fits is the front bumper from the J’s Racing Fit ST 09 spec, the demo car that won an excellence award at the 2009 Tokyo International Custom Car Contest. Rather than splitting the front wing section from the bumper body, J’s Racing molded bumper, grille and ducts as a single FRP piece, which keeps the cost down and the fit consistent. The nose is extended by 10mm, and the large radiator opening is laid out deep to bring coolant temperature down. It suits an early GE6 to GE9 owner rebuilding the whole front end; anyone wanting a subtle add-on should look at a lip spoiler instead.

Design and Performance

The underside is shaped as a wing, aiming for high downforce with low drag, yet ground clearance is kept so the car still clears circuit curbs and copes with the street. Integrated brake ducts on each side can take a duct hose to feed cooling air to the brakes and resist fade. Recesses in the bumper sides, made possible by the longer nose, add canard area for the optional GT canards. The tow hook opening has a removable cover and a wide shape for a rope pulled at an angle, and it accepts the factory hook.

Features

One-piece FRP construction with integrated grille and brake ducts
Aluminum mesh fitted in the grille as standard
Wing-shaped under panel for downforce with low drag
Large, deep radiator opening to lower coolant temperature
Nose extended 10mm, with license plate mounting considered
Removable tow hook cover that accepts the factory hook

Applications

Honda Fit: GE6 / GE7 / GE8 / GE9 Early Model | 2007-2010 | 1.3L L13A or 1.5L L15A

Notes

Early model GE Fits only, built up to September 2010, chassis numbers 1000001 to 1499999
Supplied in black gelcoat; paint and fitting work are required and not included
The dedicated GT canards, emblem and tow hook are optional and sold separately
Duct hoses for the brake ducts are not included
Shipped from Japan through J’s Racing USA; Bulletproof Automotive confirms availability and lead time once you order

Frequently Asked Questions

What is not included with the bumper? Paint, fitting work, duct hoses and the optional parts. The bumper ships in black gelcoat with aluminum mesh in the grille. The dedicated GT canards, the dedicated emblem and the special tow hook are separate options. Budget for a body shop to fit, prepare and paint the bumper.
Does the Type-S GT Bumper for GE cars fit the late model Fit? No. The Type-S GT Bumper for GE cars is made for early model GE6, GE7, GE8 and GE9 Fits built up to September 2010, chassis numbers 1000001 to 1499999. Late model cars have a separate GT bumper designed for the facelifted GE8 RS.
Can I still mount a front license plate? Yes. The manufacturer extended the nose by 10mm and designed it with license plate mounting in mind. Placement and hardware will depend on your plate bracket, so test fit the bracket before drilling anything once the bumper is painted and installed on the car.
Do the brake ducts work? Yes. The ducts on each side are molded into the bumper and can act as air intakes as they are. The manufacturer shaped them all the way back so a small opening still captures cooling air. Fitting a duct hose routes that air to the brakes to help prevent fade.
Will it scrape on a lowered car? The manufacturer designed the wing-shaped under panel to keep ground clearance, so the bumper clears circuit curbs and remains easy to live with on the street. How close it sits to the ground still depends on your ride height and driveway angles.

About J’s Racing

J’s Racing was established in Osaka in 1989, as VTEC engines and lightweight Civics and Integras were changing what a Honda could do, and it has built parts for Hondas ever since. The company develops engine response, suspension, braking, cooling and aerodynamics together as one system, then proves the parts in time attack, gymkhana, endurance and circuit racing. Its Fit lapped Tsukuba Circuit in 1’00.459, and its naturally aspirated AP1 S2000, the Maou car, became the company’s reference build for the Honda roadster. Every J’s Racing part is designed and tested in Japan, and J’s Racing USA in Carson, California handles distribution in the United States.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

J’s Racing Type-S GT Bumper for GE Honda Fit Early Model [JSF-F3M-F]

Guaranteed Safe Checkout

J’s Racing Type-S GT Bumper for GE Honda Fit Early Model

Design and Performance

Features

Applications

Notes

Frequently Asked Questions

About J’s Racing

Reviews