Do I need to modify my bumper to fit these canards?

Yes. Holes must be drilled in the front bumper to mount them. Depending on the position and angle you choose, the inner edge of each canard, where it meets the body, may also need trimming. Stainless steel bolts and nuts are included, but any bumper refinishing is up to the installer.

Why does a front-wheel-drive car benefit from canards?

On a front-drive DC2 the front tires both steer and put power down, so extra load on them pays off twice. The manufacturer designed these canards to raise front traction and states they improve cornering speed dramatically, which is where a light front-drive car gains time on a circuit.

Should I run the Carbon Canards for DC2 with a rear wing?

Yes, ideally. The manufacturer says the Carbon Canards for DC2 cars are especially necessary on cars with a GT wing, because the wing adds rear grip and the front needs matching traction to keep the balance. Without a wing the canards still add front load, but the effect is less critical.

What are the canards made from?

The blades are CFRP, a carbon fiber reinforced plastic, and the stays that hold them to the bumper are aluminum plate. The manufacturer describes the structure as extremely lightweight yet strong enough to cope with intense downforce. The mounting hardware is stainless steel bolts and nuts supplied with the kit.

Do these fit the US Acura Integra Type R?

Yes. The canards are listed for the DC2 Integra Type R, which includes the 1997 to 2001 Acura Integra Type R sold in the United States. Fitment assumes the factory Type R front bumper, since the canards mount by drilling into it; aftermarket bumpers may need their own test fitting.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

J’s Racing Carbon Canards for DC2 Honda Integra Type R

J’s Racing’s Carbon Canards for DC2 Integra Type R track cars put downforce where a front-drive chassis needs it most, over the driven and steered wheels. The Osaka tuner, a Honda-only specialist since 1989, pairs CFRP blades with aluminum plate stays so the assembly stays very light yet strong enough for heavy aerodynamic load. J’s Racing says the extra front traction lifts cornering speed sharply and is close to mandatory once a GT wing goes on the back, where it balances the added rear grip. They suit a time-attack or circuit DC2 already running a big wing; on a street car with a stock rear spoiler they are mostly visual.

Tips

Plan the installation before ordering. The front bumper has to be drilled to mount the canards, and depending on the position and angle you choose, the inner edge of each canard, the side that meets the body, may need trimming so it sits flush. Dedicated stainless steel bolts and nuts come with the kit, so no extra hardware is needed for the mounting itself.

Features

CFRP canard blades for low weight
Aluminum plate stays built to withstand strong downforce
Adds front traction to a front-wheel-drive chassis for higher cornering speed
Balances the rear downforce of a GT wing
Dedicated stainless steel bolts and nuts supplied

Applications

Acura Integra Type R: DC2 | 1997-2001 | 1.8L B18C5
Honda Integra Type R: DC2 | 1995-2001 | 1.8L B18C

Notes

Mounting requires drilling holes in the front bumper
Depending on mounting position and angle, the body-side inner edge of the canards may need to be cut or trimmed to fit the bumper
Painting and bumper repair work are not included
Recommended alongside the 3D GT-Wing Type1 for the DC2 Integra Type R, sold separately
J’s Racing USA brings these in from Osaka, so Bulletproof Automotive verifies availability and gives you the lead time at the point of order

Frequently Asked Questions

Do I need to modify my bumper to fit these canards? Yes. Holes must be drilled in the front bumper to mount them. Depending on the position and angle you choose, the inner edge of each canard, where it meets the body, may also need trimming. Stainless steel bolts and nuts are included, but any bumper refinishing is up to the installer.
Why does a front-wheel-drive car benefit from canards? On a front-drive DC2 the front tires both steer and put power down, so extra load on them pays off twice. The manufacturer designed these canards to raise front traction and states they improve cornering speed dramatically, which is where a light front-drive car gains time on a circuit.
Should I run the Carbon Canards for DC2 with a rear wing? Yes, ideally. The manufacturer says the Carbon Canards for DC2 cars are especially necessary on cars with a GT wing, because the wing adds rear grip and the front needs matching traction to keep the balance. Without a wing the canards still add front load, but the effect is less critical.
What are the canards made from? The blades are CFRP, a carbon fiber reinforced plastic, and the stays that hold them to the bumper are aluminum plate. The manufacturer describes the structure as extremely lightweight yet strong enough to cope with intense downforce. The mounting hardware is stainless steel bolts and nuts supplied with the kit.
Do these fit the US Acura Integra Type R? Yes. The canards are listed for the DC2 Integra Type R, which includes the 1997 to 2001 Acura Integra Type R sold in the United States. Fitment assumes the factory Type R front bumper, since the canards mount by drilling into it; aftermarket bumpers may need their own test fitting.

About J’s Racing

J’s Racing was established in Osaka in 1989, as VTEC engines and lightweight Civics and Integras were changing what a Honda could do, and it has built parts for Hondas ever since. The company develops engine response, suspension, braking, cooling and aerodynamics together as one system, then proves the parts in time attack, gymkhana, endurance and circuit racing. Its Fit lapped Tsukuba Circuit in 1’00.459, and its naturally aspirated AP1 S2000, the Maou car, became the company’s reference build for the Honda roadster. Every J’s Racing part is designed and tested in Japan, and J’s Racing USA in Carson, California handles distribution in the United States.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

J’s Racing Carbon Canards for DC2 Honda Integra Type R [CCN-T2]

Guaranteed Safe Checkout

J’s Racing Carbon Canards for DC2 Honda Integra Type R

Tips

Features

Applications

Notes

Frequently Asked Questions

About J’s Racing

Reviews