Does the Carbon Fiber Intake for C346 need a tune?

No. COBB built the Carbon Fiber Intake for C346 Focus models to run on the original factory calibration, and it is also compatible with all available COBB Off The Shelf maps for the ST and RS. An Accessport can be added later without changing the intake.

Is this intake legal to run in California?

Yes. It carries California Air Resources Board Executive Order D-660-56, which makes it legal for sale and use on emissions-controlled vehicles in all 50 states when it is installed according to the COBB application guide. That covers every Focus ST and RS year listed below.

Which Focus models and years does it fit?

The confirmed list spans US, European, Chinese and Australian market cars depending on the year. COBB confirms fitment on the 2013-2018 Ford Focus ST and the 2016-2018 Ford Focus RS. COBB states fitment was verified on both left-hand drive and right-hand drive vehicles.

What comes in the box?

The kit is a complete replacement for the factory intake tract up to the turbo. It includes the carbon fiber intake tube, the carbon fiber airbox lid with its Redline badge, a pre-oiled dual cone air filter, black 4-ply silicone couplers and black e-coated 304 stainless steel clamps.

Is the air filter reusable?

Yes. The dual cone filter arrives pre-oiled and is designed to be cleaned and reused rather than thrown away at each service. It is specified to increase airflow, and owners should expect more audible turbo noise under load once it is fitted.

Why might the carbon weave look slightly different from the photos?

Every tube and lid is hand laid from 3k tow carbon fiber in a 2x2 twill, so COBB notes that slight imperfections or small variances in the weave pattern can be expected from piece to piece. These are cosmetic traits of hand layup only.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

COBB Tuning Redline Carbon Fiber Intake for C346 Ford Focus ST / RS

COBB Tuning’s Carbon Fiber Intake for C346 Focus ST and RS models replaces the entire factory tract from the filter to the turbo with hand-laid 3k carbon fiber, and CARB EO D-660-56 keeps it smog legal. It suits the owner who wants the engine bay to look as considered as the rest of the car; anyone chasing dyno numbers should pair it with an Accessport and a matching map.

Tuning and Support

The Carbon Fiber Intake for C346 is compatible with the factory calibration and every COBB Off The Shelf map, so it can go on before or after an Accessport. Fitment has been verified on both left-hand drive and right-hand drive vehicles.

Features

Intake tube and airbox lid in 3k tow, 2×2 twill carbon fiber with a gloss finish
Large 3 inch piping for improved flow to the turbo
Pre-oiled, reusable dual cone air filter
Black 4-ply silicone couplers
Black e-coated 304 stainless steel clamps
Complete factory replacement all the way to the turbo

What’s Included

Carbon fiber intake tube
Carbon fiber airbox lid with Redline badge
Pre-oiled dual cone air filter
Black 4-ply silicone couplers
Black e-coated 304 stainless steel clamps

Applications

Ford Focus RS: C346 | 2016-2018
Ford Focus ST: C346 | 2013-2018

Notes

50-state legal for sale and use on emissions-controlled vehicles with CARB EO D-660-56 when installed per the COBB application guide
No Accessport or tune is included; the intake runs on the factory calibration or any COBB Off The Shelf map
The COBB Carbon Fiber Air Scoop for the Focus ST is sold separately
Carbon fiber parts are hand laid, so slight imperfections or weave pattern variances can be expected

Frequently Asked Questions

Does the Carbon Fiber Intake for C346 need a tune? No. COBB built the Carbon Fiber Intake for C346 Focus models to run on the original factory calibration, and it is also compatible with all available COBB Off The Shelf maps for the ST and RS. An Accessport can be added later without changing the intake.
Is this intake legal to run in California? Yes. It carries California Air Resources Board Executive Order D-660-56, which makes it legal for sale and use on emissions-controlled vehicles in all 50 states when it is installed according to the COBB application guide. That covers every Focus ST and RS year listed below.
Which Focus models and years does it fit? The confirmed list spans US, European, Chinese and Australian market cars depending on the year. COBB confirms fitment on the 2013-2018 Ford Focus ST and the 2016-2018 Ford Focus RS. COBB states fitment was verified on both left-hand drive and right-hand drive vehicles.
What comes in the box? The kit is a complete replacement for the factory intake tract up to the turbo. It includes the carbon fiber intake tube, the carbon fiber airbox lid with its Redline badge, a pre-oiled dual cone air filter, black 4-ply silicone couplers and black e-coated 304 stainless steel clamps.
Is the air filter reusable? Yes. The dual cone filter arrives pre-oiled and is designed to be cleaned and reused rather than thrown away at each service. It is specified to increase airflow, and owners should expect more audible turbo noise under load once it is fitted.
Why might the carbon weave look slightly different from the photos? Every tube and lid is hand laid from 3k tow carbon fiber in a 2×2 twill, so COBB notes that slight imperfections or small variances in the weave pattern can be expected from piece to piece. These are cosmetic traits of hand layup only.

About COBB Tuning

COBB Tuning was founded by Trey Cobb in 1999 in Rockwall, Texas, as a Subaru performance shop in the back of his father’s tire shop, and is now headquartered in Austin, Texas. In 2004 COBB introduced the Accessport, a handheld ECU tuning device that flashes COBB’s off-the-shelf maps or a custom tune and doubles as a real-time gauge and datalogger. The range has since grown from Subaru to Ford, Volkswagen, Audi, Porsche, Nissan, Honda, Mazda, Mitsubishi and Toyota platforms, with intakes, intercoolers, exhausts and flex fuel kits engineered alongside the tuning, and many COBB parts carry California Air Resources Board Executive Order numbers for use in all 50 states.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

COBB Tuning Redline Carbon Fiber Intake for C346 Ford Focus ST / RS [793150]

Guaranteed Safe Checkout

COBB Tuning Redline Carbon Fiber Intake for C346 Ford Focus ST / RS

Tuning and Support

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About COBB Tuning

Reviews