Do the Moton 3-Way Motorsport Coilovers for G8X need an EDC cancellation kit?

Yes, on any car with Adaptive M Suspension. The Moton 3-Way Motorsport Coilovers for G8X carry no electronic valves, so the factory damper control must be cancelled to avoid suspension fault warnings. MOTON does not supply that part; Bulletproof Automotive carries the KW ESC Module and the Öhlins Cancellation Kit for the M3 and M4.

What does high-speed and low-speed compression adjustment change?

Low-speed compression governs slow movement such as roll, pitch under braking and weight transfer at turn-in. High-speed compression governs sharp hits such as kerbs and ripples. Separate adjusters let body control be tightened without making the car skip over kerbs, or let bumps be softened without losing the platform.

Is a 3-way coilover too much for a road car?

For most road cars, yes. The third adjuster earns its place when a driver tunes for specific circuits and tires, ideally with data or a setup engineer. Road drivers with occasional track days are better served by the MOTON 1-Way, and regular track drivers by the 2-Way Clubsport.

What comes in the box?

Four non-inverted monotube coilovers with remote reservoirs and springs, pillowball front camber plates and a pair of adjustable aluminum front droplinks with M10 threads. The rear is a true coilover. The EDC cancellation kit, wheel spacers and the alignment are not included.

Are MOTON coilovers rebuildable, and is there a warranty?

Yes to both. MOTON designs every damper to be serviced and refreshed rather than replaced, which matters on a kit that will see heavy track use. AST x MOTON covers its coilover kits with a 24-month warranty, registered with the order ID on the product certificate or on a damper.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Moton 3-Way Motorsport Coilovers for G8X BMW M2 / M3 / M4 RWD

Moton’s 3-Way Motorsport Coilovers for G8X BMW M2, M3 and M4 RWD are the most adjustable dampers MOTON builds for the rear-drive cars, from the line whose wins run through FIA GT, ETCC and WTCC racing. Rebound, low-speed compression and high-speed compression each have their own adjuster, the compression pair sitting on external reservoirs that hold damping steady as temperatures climb. With data and a setup engineer, the G8X can be tuned for one circuit and one tire.

Design and Performance

Two compression circuits separate the response to slow inputs, such as roll and pitch under braking, from fast ones such as kerbs and ripples. Body control can then be firmed up without making the car skip over bumps. It is overkill on a road car; the Moton 1-Way Coilovers suit that use, and the Moton 2-Way Clubsport Coilovers sit between the two.

Features

Non-inverted monotube dampers, adjustable for rebound and separate high-speed and low-speed compression
Compression adjusters on external remote reservoirs
Threaded ride height at all four corners
True coilover layout front and rear
Pillowball front camber plates
Elevated top guide with helper piston
Adjustable aluminum front droplinks, M10, 288 mm to 306 mm
Fully rebuildable, 24-month AST x MOTON warranty

What’s Included

Front coilovers with remote reservoirs (L/R)
Rear coilovers with remote reservoirs (L/R)
Front and rear springs
Pillowball front camber plates (L/R)
Adjustable front droplinks (x2)

Applications

BMW M2: G87 | 2023-present
BMW M3: G80 | 2021-present
BMW M3 Touring: G81 | 2021-present
BMW M4: G82 | 2021-present
BMW M4 Convertible: G83 | 2021-present

Notes

The Moton 3-Way Motorsport Coilovers for G8X fit rear-wheel-drive cars only; xDrive models take the Moton 3-Way Motorsport Coilovers for G8X xDrive BMW M3 / M4
Cars with Adaptive M Suspension (EDC) need a cancellation kit, sold separately: the KW ESC Module or Öhlins Cancellation Kit
Route reservoir hoses clear of moving parts and secure them at the banjo
Keep at least 5 mm between wheel and damper; some factory wheels need a spacer
Kits are built to order in the Netherlands; lead time is confirmed at order
Images show representative MOTON kits

Frequently Asked Questions

Do the Moton 3-Way Motorsport Coilovers for G8X need an EDC cancellation kit? Yes, on any car with Adaptive M Suspension. The Moton 3-Way Motorsport Coilovers for G8X carry no electronic valves, so the factory damper control must be cancelled to avoid suspension fault warnings. MOTON does not supply that part; Bulletproof Automotive carries the KW ESC Module and the Öhlins Cancellation Kit for the M3 and M4.
What does high-speed and low-speed compression adjustment change? Low-speed compression governs slow movement such as roll, pitch under braking and weight transfer at turn-in. High-speed compression governs sharp hits such as kerbs and ripples. Separate adjusters let body control be tightened without making the car skip over kerbs, or let bumps be softened without losing the platform.
Is a 3-way coilover too much for a road car? For most road cars, yes. The third adjuster earns its place when a driver tunes for specific circuits and tires, ideally with data or a setup engineer. Road drivers with occasional track days are better served by the MOTON 1-Way, and regular track drivers by the 2-Way Clubsport.
What comes in the box? Four non-inverted monotube coilovers with remote reservoirs and springs, pillowball front camber plates and a pair of adjustable aluminum front droplinks with M10 threads. The rear is a true coilover. The EDC cancellation kit, wheel spacers and the alignment are not included.
Are MOTON coilovers rebuildable, and is there a warranty? Yes to both. MOTON designs every damper to be serviced and refreshed rather than replaced, which matters on a kit that will see heavy track use. AST x MOTON covers its coilover kits with a 24-month warranty, registered with the order ID on the product certificate or on a damper.

About Moton

MOTON Suspension Technology was founded in the Netherlands in 1999, and by June 2000 around 30 percent of the cars at the 24 Hours of Le Mans ran its dampers. MOTON has since won in the FIA GT and FIA Sportscar championships, the ETCC and WTCC, Grand-Am and World Challenge. AST Suspension acquired the brand in 2011, and every MOTON damper is now developed, tested and built by the AST x MOTON team in the Netherlands, part of the Roosen Industries group since 2016.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Moton 3-Way Motorsport Coilovers for G8X BMW M2 / M3 / M4 RWD [M 505 186SD]

Guaranteed Safe Checkout

Moton 3-Way Motorsport Coilovers for G8X BMW M2 / M3 / M4 RWD

Design and Performance

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Moton

Reviews