Do the Endless Brake Pads for AP1 also fit the AP2 S2000?

Yes. Endless lists the same EP406 front and EP451 rear shapes for every S2000 from 2000 to 2009, so the Endless Brake Pads for AP1 cars fit the 2004 to 2009 AP2 as well. An S2000 fitted with an aftermarket big brake kit needs the pads for those calipers instead, so check the brakes before ordering.

Which Endless compound suits an S2000 at track days?

MX72 Plus suits an S2000 on street tires at occasional track days, and Endless rates it to 750C, or 1382F. Owners who lap the car most months move to CC-Rg, rated to 800C, or 1472F, with strong bite even when cold, though Endless notes it is noisy on the road. Prepared race cars move on to the racing compounds.

Are Endless street pads dusty on an S2000?

Not in SSS or SSM Plus. Endless rates SSS for exceptionally low dust and low wear, and SSM Plus for low dust and low noise, so either keeps the wheels of a road-driven S2000 clean. MX72 and MX72 Plus also keep noise and dust to a minimum while handling far higher rotor temperatures.

Is the Front and Rear Set cheaper than buying each axle?

Yes, in four compounds. For SSM Plus, MX72, MX72 Plus and CC-Rg, Endless sells EP406 and EP451 as a combo set priced below the two axles bought separately. In SSS and the racing options, the Front and Rear Set costs the same as one front set plus one rear set.

Do the racing compounds work on a street-driven S2000?

Some can be driven on the road. Endless rates ME22 for both street and track, but W003 is circuit only, with high rotor wear when cold, and every racing compound needs the Endless bedding procedure before hard use. For a road car that sees a few track days a year, the street-to-circuit MX72 Plus is the better fit.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Endless Brake Pads for AP1 / AP2 Honda S2000

Endless’s Brake Pads for AP1 / AP2 Honda S2000 suit the whole 2000 to 2009 run of Honda’s front-mid-engined roadster, from the first AP1 with its 9,000rpm F20C to the 2.2-liter AP2, because Endless lists a single front shape, EP406, and a single rear shape, EP451, across both chassis. One compound decision therefore covers an early AP1 or a late AP2. An S2000 on these shapes can run SSS for quiet road miles or go as far as MA45B, the endurance-racing compound. For an S2000 that does track days on street tires, MX72 Plus is where we would begin.

Features

Endless pad shapes EP406 front and EP451 rear, listed for every model year from 2000 to 2009
Five street and street-to-track compounds, from SSS to CC-Rg
Racing compounds sold as three options: Racing Group, W003 Group and MA45B
SSM Plus, MX72, MX72 Plus and CC-Rg front and rear sets at Endless combo-set prices
Every compound available for the front axle, the rear axle or both

Choosing a Compound

Because Endless prices every compound for both EP406 and EP451, an S2000 can run the same compound at each end from a single order. SSS and SSM Plus suit a roadster kept for weekend drives and leave the wheels clean. MX72 and MX72 Plus suit canyon roads and track days on street tires, CC-Rg suits a car on the circuit most months, and the racing compounds suit a prepared car. W007 and W008, which Endless prices for these shapes, are left off because Endless designs both for carbon ceramic rotors, and the S2000 runs iron rotors.

Every figure below is Endless’s own. Friction is the compound’s average friction coefficient, so a higher number gives more bite for the same pedal pressure. The rotor range is the band of rotor temperatures Endless designs the compound to work in, so choose by the temperatures your car will see.

Street and street-to-track compounds

SSS (street): non-asbestos; friction 0.38-0.45; rotor range 0-480C (32-896F). Low wear, long rotor life, a strong initial response and exceptionally low dust, built for road and highway driving.
SSM Plus (street): non-asbestos; friction 0.33-0.40; rotor range 0-550C (32-1022F). Low dust, low noise and long life. Braking builds with pedal pressure rather than a sharp first bite, for drivers who want clean wheels and a quiet car.
MX72 (street to light track): ceramic carbon metal; friction 0.37-0.47; rotor range 50-700C (122-1292F). Minimal noise and dust, strong friction at low temperatures, reduced rotor wear and a better pedal feel than a typical semi-metallic pad. Endless’s dual-duty compound for a road car that sees the occasional track day.
MX72 Plus (street to circuit): ceramic carbon metal; friction 0.39-0.47; rotor range 50-750C (122-1382F). Holds its braking force to higher temperatures than MX72, with stable control and a consistent pedal release. Endless aims it at cars on street tires that run on track.
CC-Rg (track day, street capable): ceramic carbon metal; friction 0.38-0.45; rotor range 50-800C (122-1472F). High initial bite across a wide temperature range, even when cold, and modulation that works with the factory ABS under hard use. Endless notes it is noisy on the street; it is the step up from MX72 Plus for regular track days.

Racing compounds

Each option below is one choice in the Choose Compound menu. For a group, name your compound in the order notes and Bulletproof Automotive confirms it with your order. Every racing compound needs Endless’s bedding procedure: at 70 to 80 percent of normal pedal effort, bring the rotors gradually to 400C (752F), then let them cool below 150C (302F) before hard use.

Racing Group

ME22: dual braking style; friction 0.33-0.38; rotor range 150-800C (302-1472F). Developed from ME20 with lower friction for control, for light to mid-weight cars or heavier cars on slower circuits. Endless rates it for street and track.
ME20: trail-braking style; rotor range 150-800C (302-1472F). High, stable friction at high temperature with low wear, developed for touring cars and rally. Works front or rear, with stock or racing ABS.
N35S: trail-braking style; rotor range 300-800C (572-1472F). Quick, sharp and responsive, with stable modulation under high temperature and load. Endless’s flagship rally compound, also run in FIA GT, and its suggested starting point for drivers new to Endless racing pads.
N05U: trail-braking style; friction 0.46-0.53; rotor range 300-800C (572-1472F). More bite than N35S, popular in sprint-focused Porsche Cup cars.
N05S: trail-braking style; friction 0.45-0.53; rotor range 300-800C (572-1472F). Immediate high friction with little pedal effort, used in Japanese rally cars without brake boosters and in European and Australian sprint racing.
N30C: friction 0.50-0.60; rotor range 300-800C (572-1472F). High initial bite, gentle on rotors and low wear. A rally compound for cars without a brake booster.
S55G: Endless publishes no figures. It suits lightweight and front-wheel-drive cars, and the rear of front-wheel-drive cars, with high controllability.
PC35: Endless publishes no figures. More bite than N35S with high braking force and a stable pedal; Endless’s base pad for rally raid.

W003 Group

W003: trail-braking style; friction 0.40-0.45. Similar in character to N35S with better wear, tough and stable at high temperature with a linear torque curve; run in rally, touring cars, ALMS and PWC. Circuit only: Endless does not recommend it for the street and notes high rotor wear when cold.
S330: trail-braking style; friction 0.60-0.70; rotor range 300-850C (572-1562F). High friction for sprint racing, with good control at high levels and without accelerating rotor wear; run in Super GT, stock cars and GT2 and GT3 sprint racing.

Sold as its own option

MA45B: standard braking style; rotor range 300-800C (572-1472F). Endless’s endurance compound: low friction but stable for a whole race, with excellent heat resistance and wear. Most Nurburgring and Spa 24 Hours entrants run it.

Applications

Honda S2000: AP1 | 2000-2003 | 2.0L F20C
Honda S2000: AP2 | 2004-2009 | 2.2L F22C1

Notes

Each Front or Rear set of Brake Pads for AP1 and AP2 cars covers both wheels on one axle
In SSM Plus, MX72, MX72 Plus and CC-Rg, the Front and Rear Set is an Endless combo set, priced below the two axles bought separately
For the factory calipers. An S2000 converted to an Endless big brake kit takes the pads for those calipers; see the Endless brake kits for the S2000.

Frequently Asked Questions

Do the Endless Brake Pads for AP1 also fit the AP2 S2000? Yes. Endless lists the same EP406 front and EP451 rear shapes for every S2000 from 2000 to 2009, so the Endless Brake Pads for AP1 cars fit the 2004 to 2009 AP2 as well. An S2000 fitted with an aftermarket big brake kit needs the pads for those calipers instead, so check the brakes before ordering.
Which Endless compound suits an S2000 at track days? MX72 Plus suits an S2000 on street tires at occasional track days, and Endless rates it to 750C, or 1382F. Owners who lap the car most months move to CC-Rg, rated to 800C, or 1472F, with strong bite even when cold, though Endless notes it is noisy on the road. Prepared race cars move on to the racing compounds.
Are Endless street pads dusty on an S2000? Not in SSS or SSM Plus. Endless rates SSS for exceptionally low dust and low wear, and SSM Plus for low dust and low noise, so either keeps the wheels of a road-driven S2000 clean. MX72 and MX72 Plus also keep noise and dust to a minimum while handling far higher rotor temperatures.
Is the Front and Rear Set cheaper than buying each axle? Yes, in four compounds. For SSM Plus, MX72, MX72 Plus and CC-Rg, Endless sells EP406 and EP451 as a combo set priced below the two axles bought separately. In SSS and the racing options, the Front and Rear Set costs the same as one front set plus one rear set.
Do the racing compounds work on a street-driven S2000? Some can be driven on the road. Endless rates ME22 for both street and track, but W003 is circuit only, with high rotor wear when cold, and every racing compound needs the Endless bedding procedure before hard use. For a road car that sees a few track days a year, the street-to-circuit MX72 Plus is the better fit.

About Endless

Endless is a Japanese brake manufacturer that designs everything in-house and manufactures domestically in Japan, holding surface accuracy to 1/1000mm under strict quality control. The company developed its own laminated sintered wire-mesh backing plate and ceramic carbon rotors, and it proves its parts in competition, running its own factory motorsport program and supplying winning teams across Japanese and European racing. From pads and slit rotors to forged and monobloc calipers, brake fluid, and lines, Endless builds braking systems trusted on both street and circuit.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.