Does the Two-Piece Front Splitter for ZN8 fit the BRZ?

No. The Two-Piece Front Splitter for ZN8 is made for the Toyota GR86 front bumper. Verus Engineering builds a separate two-piece splitter for the 2022 and later Subaru BRZ, with its own bracket set including four tie rod extensions, because the two cars wear different bumpers.

Why is the Verus GR86 splitter made in two pieces?

Verus Engineering split the blade for practical reasons. Two halves cut shipping costs, and if one side is damaged you can buy a replacement half instead of a full blade. The included tie kit, part number A0004A, keeps the two-piece assembly rigid and durable on the car.

Does the two-piece splitter work with the Verus rear diffuser?

Yes. Verus Engineering designed the splitter and its GR86 rear diffuser together in its analysis software, and the pair forms the Ventus 1 package, lowering overall lift and drag for a balanced car at speed. Verus pitches Ventus 1 at daily drivers and track regulars alike, citing more grip and better mileage.

What else comes in the GR86 two-piece splitter kit?

Alongside the two blade halves and the A0004A tie kit, Verus Engineering supplies a two-piece splitter bracket, four crash beam brackets, two splitter tie assemblies, two clevises, a support bracket and a hardware kit with everything needed. Stainless hardware is used throughout, and the splitter is made in the U.S.A.

How hard is the two-piece splitter to install on a GR86?

Verus Engineering calls it a simple bolt-on installation. The halves mount through the crash beam brackets and splitter brackets, with tie assemblies and clevises bracing them, all secured by stainless hardware. An informative packet, install manual and install video from Verus walk through each step.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Verus Engineering Two-Piece Front Splitter for ZN8 Toyota GR86

Verus Engineering’s Two-Piece Front Splitter for ZN8 Toyota GR86 was designed alongside the Verus rear diffuser, so front and rear gain downforce in step and lap times fall. A low-pressure zone forms beneath the blade with high pressure on top, pushing the nose down so the GR86 gets more from its front tires. Two halves cut shipping cost and let a damaged side be replaced alone, a sensible choice for a car that divides its time between track days and the daily drive.

Rigid by Design

Every kit includes the Verus front splitter tie kit, part number A0004A, which adds rigidity and durability to the two-piece blade system. The hard, durable plastic blades are shaped from in-house scan data for a near-OEM fit and CFD tested within the Ventus 1 package.

Features

Two-piece blade lowers shipping cost and allows one half to be replaced if damaged
Front splitter tie kit A0004A included for rigidity
Mounts through four crash beam brackets and a dedicated two-piece splitter bracket
Stainless fasteners throughout; built in the U.S.A.

What’s Included

Two-piece splitter blades (x2)
Two-piece splitter bracket
Crash beam brackets (x4)
Splitter tie assemblies (x2)
Splitter clevises (x2)
Splitter support bracket
Hardware kit with all hardware needed for install

Applications

Toyota GR86: ZN8 | 2022-present

Notes

Fits the Toyota GR86 only; BRZ owners need the Two-Piece Front Splitter for ZD8 Subaru BRZ
The Two-Piece Front Splitter for ZN8 forms the front of the Verus Ventus 1 package with the Verus Engineering Rear Diffuser for ZN8 Toyota GR86 and ZD8 Subaru BRZ
Verus sells replacement splitter halves, so a damaged side does not mean a whole new blade
For a one-piece blade matched to the High-Efficiency Rear Wing Kit in Ventus 2, see the Front Splitter for ZN8 Toyota GR86
Verus publishes an informative packet, an install manual and an install video
See every Verus Engineering part for the ZN8 Toyota GR86
Verus covers its parts with a 1-year limited warranty against manufacturing defects

Frequently Asked Questions

Does the Two-Piece Front Splitter for ZN8 fit the BRZ? No. The Two-Piece Front Splitter for ZN8 is made for the Toyota GR86 front bumper. Verus Engineering builds a separate two-piece splitter for the 2022 and later Subaru BRZ, with its own bracket set including four tie rod extensions, because the two cars wear different bumpers.
Why is the Verus GR86 splitter made in two pieces? Verus Engineering split the blade for practical reasons. Two halves cut shipping costs, and if one side is damaged you can buy a replacement half instead of a full blade. The included tie kit, part number A0004A, keeps the two-piece assembly rigid and durable on the car.
Does the two-piece splitter work with the Verus rear diffuser? Yes. Verus Engineering designed the splitter and its GR86 rear diffuser together in its analysis software, and the pair forms the Ventus 1 package, lowering overall lift and drag for a balanced car at speed. Verus pitches Ventus 1 at daily drivers and track regulars alike, citing more grip and better mileage.
What else comes in the GR86 two-piece splitter kit? Alongside the two blade halves and the A0004A tie kit, Verus Engineering supplies a two-piece splitter bracket, four crash beam brackets, two splitter tie assemblies, two clevises, a support bracket and a hardware kit with everything needed. Stainless hardware is used throughout, and the splitter is made in the U.S.A.
How hard is the two-piece splitter to install on a GR86? Verus Engineering calls it a simple bolt-on installation. The halves mount through the crash beam brackets and splitter brackets, with tie assemblies and clevises bracing them, all secured by stainless hardware. An informative packet, install manual and install video from Verus walk through each step.

About Verus Engineering

Verus Engineering designs aerodynamic and performance parts in Indianapolis, Indiana. Two engineers founded it in late 2014 as Velox Motorsports and renamed it in 2017 after a trademark dispute; verus is Latin for true or complete. Each design starts from a 3D scan of the car, is developed with CFD and finite element analysis and is validated on track, across more than 20 platforms from the GR86 to the C8 Corvette.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Verus Engineering Two-Piece Front Splitter for ZN8 Toyota GR86 [A0459A]

Guaranteed Safe Checkout

Verus Engineering Two-Piece Front Splitter for ZN8 Toyota GR86

Rigid by Design

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Verus Engineering

Reviews