Does the Fuel Pump Hanger for R35 include the fuel pump?

Not in the base price. The T1 Fuel Pump Hanger for R35 is the in-tank module, and the Injector Dynamics FPS1100, made up of the E5LM brushless pump and BPC100 controller, is available as an option on this listing. The hanger is designed specifically around that pump, so choose the Hanger with FPS1100 version if the car needs one.

How much power does the GT1R E5LM hanger support?

With a single FPS1100, T1 Race Development quotes a little over 2,000 wheel horsepower on ethanol, even at relatively low tank levels. Converting to the dual pump configuration, which T1 prices at under 900 dollars, raises that to around 2,700 wheel horsepower on ethanol. Both figures assume system voltage above 8 volts and fuel pressure below 150 psi.

Why choose a brushless pump over conventional R35 pumps?

Conventional pumps lose flow as voltage drops and fuel pressure rises; Injector Dynamics notes a pair of 500 liter per hour pumps can fall to around 500 combined at 30 psi of boost. The BPC100 powers the E5LM from its own supply and holds 1,100 liters per hour even at 8 volts.

Does the hanger keep the factory fuel bowl?

Yes. T1 Race Development retains the lower plastic factory bowl, which works with the siphon jet pumps that move fuel from around the tank to the pickup, so the car can still use most of the tank between fills. The kit adds the upper assembly, lid, check valve and in-tank filter.

Is wiring included with the E5LM hanger?

No. T1 Race Development makes GT1R BPC harnesses for this hanger in PWM and MAP versions, both sold separately. They cover the power and ground supply, the control wires that plug into the factory fuel pump connector, and CAN communication when the car runs a MoTeC M1 ECU.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

T1 Race Development GT1R E5LM Fuel Pump Hanger for R35 Nissan GT-R

T1 Race Development’s GT1R E5LM Fuel Pump Hanger for R35 Nissan GT-R retires the old routine of stacked pumps, voltage boosters and keeping the tank three-quarters full. Built around the Injector Dynamics FPS1100, the E5LM brushless pump paired with the BPC100 controller, the module supports a little over 2,000 wheel horsepower on ethanol from a single pump at relatively low fuel levels, and converts to dual pumps for under $900 when the build heads toward 2,700. It keeps the factory fuel bowl, so the car still draws fuel the way Nissan designed it to.

Design and Performance

Nissan feeds the pump from a bowl, with siphon jet pumps moving fuel to it from around the tank, which is what lets a GT-R use nearly all of its fuel between fills. T1 keeps that lower plastic bowl and adds a new upper assembly, fuel tank lid, internal check valve and the lines and fittings inside the tank and on the lid.

Features

Supports a little over 2,000 whp on ethanol from a single FPS1100 pump
Converts to dual pumps for 2,700 whp on ethanol
Retains the factory lower fuel bowl
New upper assembly, tank lid and internal check valve
40-micron in-tank pre-filter that rarely needs service
Pump speed control options and CAN diagnostics through the BPC100

What’s Included

GT1R upper hanger assembly
Fuel tank lid
In-tank fuel filter
Internal check valve
Lines and fittings for the lid and the inside of the tank

Applications

Nissan GT-R: R35 | 2009-2024 | 3.8L VR38DETT V6

Notes

The Injector Dynamics FPS1100 pump and controller is not in the base price; the Fuel Pump Hanger for R35 is built around it, so choose Hanger with FPS1100 to add it
Wire the pump with the T1 Race Development GT1R BPC PWM Harness (GT1R BPC Harness) or the T1 Race Development GT1R BPC MAP Harness (GT1R BPC Harness-1)
A couple of parts transfer from the factory plastic pump module, so keep it through installation
T1 part number 02.01.04

Frequently Asked Questions

Does the Fuel Pump Hanger for R35 include the fuel pump? Not in the base price. The T1 Fuel Pump Hanger for R35 is the in-tank module, and the Injector Dynamics FPS1100, made up of the E5LM brushless pump and BPC100 controller, is available as an option on this listing. The hanger is designed specifically around that pump, so choose the Hanger with FPS1100 version if the car needs one.
How much power does the GT1R E5LM hanger support? With a single FPS1100, T1 Race Development quotes a little over 2,000 wheel horsepower on ethanol, even at relatively low tank levels. Converting to the dual pump configuration, which T1 prices at under 900 dollars, raises that to around 2,700 wheel horsepower on ethanol. Both figures assume system voltage above 8 volts and fuel pressure below 150 psi.
Why choose a brushless pump over conventional R35 pumps? Conventional pumps lose flow as voltage drops and fuel pressure rises; Injector Dynamics notes a pair of 500 liter per hour pumps can fall to around 500 combined at 30 psi of boost. The BPC100 powers the E5LM from its own supply and holds 1,100 liters per hour even at 8 volts.
Does the hanger keep the factory fuel bowl? Yes. T1 Race Development retains the lower plastic factory bowl, which works with the siphon jet pumps that move fuel from around the tank to the pickup, so the car can still use most of the tank between fills. The kit adds the upper assembly, lid, check valve and in-tank filter.
Is wiring included with the E5LM hanger? No. T1 Race Development makes GT1R BPC harnesses for this hanger in PWM and MAP versions, both sold separately. They cover the power and ground supply, the control wires that plug into the factory fuel pump connector, and CAN communication when the car runs a MoTeC M1 ECU.

About T1 Race Development

T1 Race Development was founded in Texas in 2005 by Tony Palo, whose 2000 Acura Integra GSR became the first eight-second front-wheel-drive street car before the shop turned its attention to the Nissan GT-R. T1 went on to become the first to exceed 230 mph in the half mile in a GT-R and the first to make 2,400 whp from the VR38DETT, and it now develops engines, drivetrain parts and complete builds for the R35 GT-R, Lamborghini Huracan and Audi R8.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.