Do these fit both the Urus S and Urus Performante?

Yes. LARTE's Urus S front inserts are built for the shared platform both the Urus S and Performante run through 2022 to 2026, and they bolt to the same factory attachment points on either trim. They aren't interchangeable with the newer Urus SE or earlier Urus generations, which use different bumper geometry.

What do they actually change on the bumper?

LARTE's Urus S front inserts add sculptural definition to the flattest section of the factory nose, sharpening the geometry and adding contrast where the stock bumper reads as one uninterrupted panel. LARTE designed them to complement the front splitter's lines, so the whole front end reads as one design instead of separate parts.

Can I install just the Urus S front inserts without buying LARTE's full body kit?

Yes. These Urus S front inserts ship as a standalone component, so you're not locked into the full LARGENDA kit to run them. Plenty of Urus owners start with a single piece like this and build out the rest of the kit later, or never do.

Does installing these inserts require cutting or drilling into the bumper?

No. They mount to the Urus's existing factory attachment points, so there's no drilling, cutting, or welding involved. A certified installer can fit them without permanently modifying the bumper underneath.

Should I choose carbon fiber or basalt?

Carbon fiber is the lighter option and holds up well under UV exposure, so it's the pick if you want the lowest weight and the classic woven-carbon look. Basalt fiber costs less and holds up better across extreme climate swings, making it worth a look if your Urus deals with real heat or cold rather than sitting in a garage. Both use the same factory-point bolt-on fitment.

Are the LARTE Design Urus S front inserts road legal?

Yes. Every LARTE component in the LARGENDA kit, including these inserts, carries a national type approval from the KBA, confirmed independently by GTÜ Stuttgart, so it's documented and road-legal rather than just a visual part. Buyers outside Germany should still confirm their own country's requirements before installation.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

LARTE Design Front Bumper Inserts for Lamborghini Urus Performante / S

LARTE Design’s Urus S front inserts take the flat, uninterrupted section of the factory nose and give it the depth the rest of the Performante’s face already has. Hand-laid in your choice of carbon fiber or basalt fiber, each insert is compact and sculptural, sharpening the nose geometry and adding contrast where the stock bumper reads flat. They’re built to complement the front splitter’s lines rather than compete with them, so the whole front end reads as one design instead of parts stacked on top of each other. Fitted to the Urus’s factory attachment points without drilling, they carry the same national type approval from the KBA and GTÜ Stuttgart confirmation as the rest of LARTE’s LARGENDA kit, built specifically for the 2022 through 2026 Urus Performante and S.

Sharper Nose, One Design Language

These Urus S front inserts sit in the section of the factory bumper that reads flattest from the factory, adding contrast and sculptural definition to the nose instead of leaving it as one uninterrupted panel. LARTE designed them to complement the front splitter’s lines, so the pieces read as one styling decision instead of separate add-ons competing for attention.

Choosing Carbon Fiber or Basalt

Carbon fiber is the lighter option here, holding tight panel lines with a UV-resistant finish that won’t chalk out over time. Basalt fiber, made from volcanic rock rather than woven cloth, costs less and holds up better than fiberglass across extreme climate swings, so it’s worth considering if your Urus deals with real heat or cold rather than sitting in a garage. Both options use the same factory-point bolt-on fitment and carry the same KBA type approval.

Fitment & Certification

LARTE’s Urus S front inserts bolt to the Urus’s factory attachment points, no drilling and no permanent modification, and they’re engineered specifically for the 2022 through 2026 Urus S and Performante. Every unit carries the same national type approval from the KBA, confirmed by GTÜ Stuttgart, that covers the rest of LARTE’s LARGENDA kit, so it’s documented and road-legal rather than just visually finished.

LARTE Design

LARTE Design has spent since 2012 building exclusive body kits for premium and luxury vehicles, working across brands like Mercedes-Benz, BMW, Bentley, Cadillac, Infiniti, Maserati, and Tesla. Each project starts as clay shaped by hand on the vehicle rather than on a screen, and every kit ships out in packaging built to handle freight to anywhere in the world. All of it comes together in 100% carbon fiber, and the catalog stretches from subtle widebody kits to complete transformations, matched to how far a given owner wants to push it.
- Philosophy: LARTE doesn’t hand a project off partway through. It begins with a direct conversation with a personal manager and finishes with the kit arriving in LARTE’s own packaging, with installation covered by a worldwide network of partner ateliers or LARTE’s own shop in Germany. Materials are certified before they ever touch a build, and that engineering standard holds steady no matter what vehicle is on the other end of the project.
- Design: Every LARTE build begins with clay shaped directly on the vehicle rather than a computer model. From there, engineers and designers move into 3D prototyping to work out every surface before any material is cut, and that’s the reason a finished panel reads like part of the original body instead of something added later.
- Manufacture: LARTE keeps the entire production cycle in house, running from an approved sketch straight through to final assembly. Parts are built entirely from carbon fiber using manufacturing processes LARTE holds patents on, and nothing ships without first being tested, certified, and checked by hand.
- Certification: LARTE Design GmbH holds TÜV NORD certification and gets re-audited every three years on product quality, management systems, production, and personnel. Every carbon component meets that same bar, whether it’s still in the shop or already logging miles on the road.

Features

Available in painted basalt-fiber composite or in visible carbon fiber weave
Sharpens the nose geometry and adds contrast to the factory front fascia
Patented layup and molding processes
Hand-built and inspected in-house in Germany under TÜV NORD certification
Bolt-on installation to the Urus’s factory attachment points (no drilling, no modification to the factory structure)
National type approval from the KBA, independently confirmed by GTÜ Stuttgart
Fitment guarantee
Sold as a pair

Applications

Lamborghini Urus Performante: 2023-2024
Lamborghini Urus S: 2023-2024

More LARTE Design for Lamborghini Urus Performante / S

LARGENDA body kit
Hood
Front bumper splitter
Mirror covers
Front fender flares
Front fender inserts
Side skirts
Rear bumper insert
Rear bumper diffuser
Quad exhaust tips
Rear door flares
Quarter panel flares
Roof spoiler
Lower spoiler

Notes

Sold as a pair
These inserts are included with the purchase of the LARGENDA body kit
Custom coloring is available, please contact us for more information

Frequently Asked Questions

Do these fit both the Urus S and Urus Performante? Yes. LARTE’s Urus S front inserts are built for the shared platform both the Urus S and Performante run through 2022 to 2026, and they bolt to the same factory attachment points on either trim. They aren’t interchangeable with the newer Urus SE or earlier Urus generations, which use different bumper geometry.
What do they actually change on the bumper? LARTE’s Urus S front inserts add sculptural definition to the flattest section of the factory nose, sharpening the geometry and adding contrast where the stock bumper reads as one uninterrupted panel. LARTE designed them to complement the front splitter’s lines, so the whole front end reads as one design instead of separate parts.
Can I install just the Urus S front inserts without buying LARTE’s full body kit? Yes. These Urus S front inserts ship as a standalone component, so you’re not locked into the full LARGENDA kit to run them. Plenty of Urus owners start with a single piece like this and build out the rest of the kit later, or never do.
Does installing these inserts require cutting or drilling into the bumper? No. They mount to the Urus’s existing factory attachment points, so there’s no drilling, cutting, or welding involved. A certified installer can fit them without permanently modifying the bumper underneath.
Should I choose carbon fiber or basalt? Carbon fiber is the lighter option and holds up well under UV exposure, so it’s the pick if you want the lowest weight and the classic woven-carbon look. Basalt fiber costs less and holds up better across extreme climate swings, making it worth a look if your Urus deals with real heat or cold rather than sitting in a garage. Both use the same factory-point bolt-on fitment.
Are the LARTE Design Urus S front inserts road legal? Yes. Every LARTE component in the LARGENDA kit, including these inserts, carries a national type approval from the KBA, confirmed independently by GTÜ Stuttgart, so it’s documented and road-legal rather than just a visual part. Buyers outside Germany should still confirm their own country’s requirements before installation.

About LARTE Design

LARTE Design has built exclusive body kits for premium and luxury vehicles out of Germany since 2012, with completed programs across Mercedes-Benz, BMW, Bentley, Cadillac, Infiniti, Maserati, and Tesla. The company works the way a coachbuilder used to work before CAD took over the industry, starting every project with clay modeling done directly on the physical car before engineers move into 3D prototyping to finalize the surfaces, which is why LARTE panels tend to read as part of the car’s original design rather than an aftermarket addition. Every component is built from 100% carbon fiber using several manufacturing processes patented in-house, and the company holds TÜV NORD certification covering product quality, management systems, production processes, and personnel, recertified every three years, with nothing leaving the workshop until it has been tested, certified, and inspected by hand. Orders run through a personal manager from the first conversation through final delivery, and installation is available either through LARTE’s own facilities in Germany or its network of partner ateliers worldwide, giving owners a body kit engineered specifically for their car rather than adapted from a shared-platform template.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

LARTE Design Front Bumper Inserts for Lamborghini Urus Performante / S

Guaranteed Safe Checkout

LARTE Design Front Bumper Inserts for Lamborghini Urus Performante / S

Sharper Nose, One Design Language

Choosing Carbon Fiber or Basalt

Fitment & Certification

LARTE Design

Features

Applications

More LARTE Design for Lamborghini Urus Performante / S

Notes

Frequently Asked Questions

About LARTE Design

Reviews