How many pieces come in this set?

Six pieces total, covering both the left and right sides of the vehicle across three sections each, front fender moldings, front door moldings, and rear door moldings.

What's the difference between the carbon fiber and basalt fiber options?

Carbon fiber is the lighter of the two and carries the more aggressive weave finish most enthusiasts associate with LARTE's kits. Basalt fiber offers similar structural rigidity with a different visual texture and typically a different price point.

Does this fit both the Urus Performante and the Urus S?

Yes, LARTE's Urus S side skirts are designed for both the Performante and S variants of the Urus.

Do these Urus S side skirts replace the factory rocker panels or install over them?

They're designed to integrate with the factory mounting points along the rocker line rather than functioning as a separate bolt-on afterthought, which is why professional installation is recommended.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

LARTE Design Side Skirt Set for Lamborghini Urus Performante / S

The Urus Performante and S ride on a factory rocker line that’s built for cladding, not presence. It’s flat, plastic-heavy, and does nothing to tie the front fender into the rear haunch the way a proper side profile should on a car this wide and this low. This LARTE Design Urus S Side Skirts set closes that gap with six pieces, three sections per side, running from the front fender molding through the front door molding and back through the rear door molding, available in carbon fiber or basalt fiber, so the whole lower body reads as one uninterrupted line instead of three disconnected panels.

One Line, Fender to Rear

Each of the three sections per side is finished in the same material and the same design language, so the transition from fender to door to rear quarter doesn’t break stride the way a bolted-on aftermarket piece usually does. LARTE builds these to deepen the visual impact of the car’s silhouette, creating continuity across the doors and lending a race-inspired precision rather than reading as an add-on part.

Choosing Carbon Fiber or Basalt

Carbon fiber is the lighter option here, holding tight panel lines with a UV-resistant finish that won’t chalk out over time. Basalt fiber, made from volcanic rock rather than woven cloth, costs less and holds up better than fiberglass across extreme climate swings, so it’s worth considering if your Urus deals with real heat or cold rather than sitting in a garage. Both options are cut and finished to the same factory mounting geometry across all six pieces.

Fitment & Certification

LARTE’s Urus S side skirts are engineered to mount along the Urus’s factory rocker attachment points, so installation doesn’t require reworking the body panels underneath. They’re built specifically for Urus S and Performante, and every set carries the same national type approval from the KBA, confirmed by GTÜ Stuttgart, that covers the rest of LARTE’s LARGENDA kit, so it’s documented and road-legal rather than just visually finished.

LARTE Design

LARTE Design has spent the years since 2012 building exclusive body kits for premium and luxury vehicles, with work behind names like Mercedes-Benz, BMW, Bentley, Cadillac, Infiniti, Maserati, and Tesla. Every kit starts as hand-shaped clay directly on the vehicle rather than a digital sketch, and every finished build ships in packaging engineered to survive long-haul freight. The lineup is built entirely from carbon fiber and ranges from light widebody upgrades to full transformations, scaled to whatever the owner has in mind.
- Philosophy: LARTE doesn’t hand a project off once the order is placed. A personal manager runs the initial conversation through to delivery, kits leave in LARTE’s own packaging, and installation happens either through partner ateliers worldwide or at LARTE’s own facilities in Germany. Materials get certified before they’re built into anything, and the engineering standard holds steady regardless of which vehicle is on the table.
- Design: Every project begins as clay, shaped directly on the vehicle before software enters the process. From there, engineers and designers move those surfaces into 3D prototyping to refine them further before any cutting starts, which is why a finished panel sits on the car like it belongs there rather than looking bolted on.
- Manufacture: LARTE runs the full production cycle in-house, from approved sketch to final assembly. Everything is built from 100% carbon fiber using manufacturing processes LARTE holds patents on, and nothing leaves the shop without being hand-tested, certified, and inspected first.
- Certification: LARTE Design GmbH holds TÜV NORD certification, re-audited every three years across product quality, management systems, production, and personnel. That standard covers every carbon part LARTE makes, whether it rolled out yesterday or has been on the road for years.

Features

Available in painted basalt-fiber composite or in visible carbon fiber weave
6-piece set covering both sides of the vehicle in three sections each (front fender moldings, front door moldings, and rear door moldings)
Patented layup and molding processes
Hand-built and inspected in-house in Germany under TÜV NORD certification
Bolt-on installation to the Urus’s factory attachment points (no drilling, no modification to the factory structure)
National type approval from the KBA, independently confirmed by GTÜ Stuttgart
Fitment guarantee

Applications

Lamborghini Urus Performante: 2023-2024
Lamborghini Urus S: 2023-2024

More LARTE Design for Lamborghini Urus Performante / S

LARGENDA body kit
Hood
Front bumper splitter
Front bumper inserts
Mirror covers
Front fender flares
Front fender inserts
Rear bumper insert
Rear bumper diffuser
Quad exhaust tips
Rear door flares
Quarter panel flares
Roof spoiler
Lower spoiler

Notes

Sold as a 6-piece set
These side skirts are included with the purchase of the LARGENDA body kit
Custom coloring is available, please contact us for more information

Frequently Asked Questions

How many pieces come in this set? Six pieces total, covering both the left and right sides of the vehicle across three sections each, front fender moldings, front door moldings, and rear door moldings.
What’s the difference between the carbon fiber and basalt fiber options? Carbon fiber is the lighter of the two and carries the more aggressive weave finish most enthusiasts associate with LARTE’s kits. Basalt fiber offers similar structural rigidity with a different visual texture and typically a different price point.
Does this fit both the Urus Performante and the Urus S? Yes, LARTE’s Urus S side skirts are designed for both the Performante and S variants of the Urus.
Do these Urus S side skirts replace the factory rocker panels or install over them? They’re designed to integrate with the factory mounting points along the rocker line rather than functioning as a separate bolt-on afterthought, which is why professional installation is recommended.

About LARTE Design

LARTE Design has built exclusive body kits for premium and luxury vehicles out of Germany since 2012, with completed programs across Mercedes-Benz, BMW, Bentley, Cadillac, Infiniti, Maserati, and Tesla. The company works the way a coachbuilder used to work before CAD took over the industry, starting every project with clay modeling done directly on the physical car before engineers move into 3D prototyping to finalize the surfaces, which is why LARTE panels tend to read as part of the car’s original design rather than an aftermarket addition. Every component is built from 100% carbon fiber using several manufacturing processes patented in-house, and the company holds TÜV NORD certification covering product quality, management systems, production processes, and personnel, recertified every three years, with nothing leaving the workshop until it has been tested, certified, and inspected by hand. Orders run through a personal manager from the first conversation through final delivery, and installation is available either through LARTE’s own facilities in Germany or its network of partner ateliers worldwide, giving owners a body kit engineered specifically for their car rather than adapted from a shared-platform template.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

LARTE Design Side Skirt Set for Lamborghini Urus Performante / S

Guaranteed Safe Checkout

LARTE Design Side Skirt Set for Lamborghini Urus Performante / S

One Line, Fender to Rear

Choosing Carbon Fiber or Basalt

Fitment & Certification

LARTE Design

Features

Applications

More LARTE Design for Lamborghini Urus Performante / S

Notes

Frequently Asked Questions

About LARTE Design

Reviews