Does the FAL affect the suspension tune or the elec-TRON system in any way?

No. The lift operates independently of both the damper setup and the DCU. It does not affect spring rates, valving, or ride height when not in use. Once the front axle comes back down the car behaves exactly as it would without the FAL fitted.

Does the DCU come included with this kit?

No. The Nitron DCU is required for the elec-TRON system to operate and is sold separately. The coilover kit and FAL ship without it and the active damping system will not function until the DCU is connected.

Nitron elec-TRON R1 Coilover Kit with Standalone FAL for 996 Porsche 911 Carrera / GT2 / GT3

The Nitron elec-TRON R1 coilover kit for the 996 Porsche 911 Carrera, GT2, and GT3, supplied here with Nitron’s Standalone Front Axle Lift system, brings electronic damping control through Nitron’s proportional solenoid valve with all damping managed by the Nitron DCU, which is sold separately. The hardware traces directly back to the R3 platform, so what you’re getting is proven race-derived componentry packaged into a more accessible, straightforward setup; one that works particularly well on the 996, where the rear-engine balance already provides a strong handling foundation and the suspension just needs to keep up with precision rather than complexity. The included FAL addresses the practical challenge of running a lowered 996 on public roads, raising the front axle 25mm at the shock to clear driveways, speed bumps, and parking obstacles without affecting the suspension setup or how the car drives once conditions return to normal. Every kit is custom built, custom sprung, and fully serviceable.

elec-TRON

The elec-TRON R1 for the 996 Porsche 911 runs on Nitron’s Standalone Electronic Damping configuration, which means the Nitron DCU is required and sold separately. Each shock carries its own proprietary proportional solenoid valve, giving the DCU precise, independent damping control at every corner simultaneously. The system monitors g-load, vehicle speed, road conditions, and driver inputs all at once, making damping adjustments every 5 milliseconds. For reference, a human eye blink takes somewhere between 100 and 150 milliseconds. The suspension is reacting to what the road and the driver are doing in real time, not catching up after the fact.

Standalone Electronic Damping System

The Nitron DCU is required for the elec-TRON R1 with Standalone FAL kit on the 996 Porsche 911 and is sold separately. It’s the brain behind the elec-TRON system, transforming a conventional passive damper setup into a precision semiactive platform. Working in conjunction with Nitron’s elec-TRON valve, the DCU continuously processes data from the car every 5 milliseconds; assessing vehicle attitude, braking forces, cornering loads, and acceleration inputs to determine the correct valve position and damping level at any given moment. The result is a suspension system that isn’t set to a fixed damping rate but is constantly optimizing grip and performance in real time based on what the car is actually doing. The DCU is fitted with an adjustable control knob giving the driver access to a range of pre-installed damping maps; Rain, Tour, Sport, and Race; each tuned for a specific driving context. Damping continues to be adjusted continuously within whichever map is selected, so the driver sets the overall character and the system handles the rest.
- Supplied with a custom or universal wiring harness
- Utilizes Arm Cortex-M4 processor
- Independent control of 4 electronic dampers
- 6 position rotary control switch or visual rotary display and control allows user to access a number of pre-installed damping maps (3 passive / 3 adaptive)
- Two 3 axis accelerometers
- 3 axis gyroscope
- 200Hz damping control rate
- Configured for application location and settings
- Ideal for resto-mod applications
- Fully resin bonded

The Nitron Front Axle Lift (FAL)

Running a lowered 996 Porsche 911 on the road comes with a familiar set of frustrations; steep driveways, speed bumps, and parking lot ramps that sit just low enough to make every approach a calculation. The Nitron Standalone Front Axle Lift system is built around that specific problem. With 25mm of lift available at the front axle, it clears the obstacles that lowered ride heights make problematic without requiring any changes to the suspension setup and without affecting how the car performs once you’re back on the road or circuit. It’s a practical addition to a performance suspension package, not a compromise of one.
- 250W pump
- 25mm lift height
- Typical lift time under 3-seconds
- Audible in-cabin warning system
- Switch with built-in warning light
- Auto off function
- Protects your car from damage caused by steep driveways and speed bumps
- Compatible with a wide range of suspension setups

Unique Technology

Nitron builds every shock around precision components that go through a thorough design and development process long before final assembly. The modular construction gives engineers the room to develop each application properly on its own terms, without cutting corners on part quality or how components work together under load. Everything is machined to tight tolerances and inspected individually by trained technicians; quality control isn’t a final step here, it runs through the entire process. New materials, finishes, and processes are validated extensively before they’re brought into production, with proprietary Nitron technologies woven throughout to produce shocks that hold up against the competition on both road and track. That level of engineering discipline is what the brand has been built on.

Bespoke Engineering

Nitron doesn’t start with a generic damper and work backward from there. Every application is developed from the ground up, with components, spring rates, and damping characteristics determined by the specific platform rather than borrowed from something adjacent. The geometry, weight distribution, and suspension travel of the 996 Porsche 911 shape the design from the start, not as corrections added later. That’s what separates a kit engineered for this car from one that was simply made to fit it.

Features

Shares core technology with the R3 kit
No manual damping adjustments are required, fully controlled by the solenoid valve
Internal reservoir type
Full alloy body
Preload adjuster
Nitrogen gas charged
Nitron FAL raises 25mm at the shock
Precision bearing spacers supplied as required
Consists of 4 coilovers and adjustable top mounts (+FAL kit)
FAL kit contains all components (cylinders, hydraulic lines, pump, wiring loom and controller)
Hand made to order

Specifications

Coilover Type: elec-TRON R1 with standalone FAL
Rear Suspension Type: OEM
Droplinks Included: No
Recommended Spring Rates:
- 996 Carrera:
  - FRS – Fast Road Spec:
    - Front: 457lbs/inch (80N/mm)
    - Rear: 799lbs/inch (140N/mm)
- 996 GT2:
  - FRS – Fast Road Spec:
    - Front: 400lbs/inch (70N/mm)
    - Rear: 799lbs/inch (140N/mm)
  - TDS – Track Day Spec:
    - Front: 571lbs/inch (100N/mm)
    - Rear: 913lbs/inch (160N/mm)
- 996 GT3:
  - FRS – Fast Road Spec:
    - Front: 457lbs/inch (80N/mm)
    - Rear: 799lbs/inch (140N/mm)

Applications

Porsche 911 Carrera: 996 | 1997-2005
Porsche 911 GT2: 996 | 2001-2005
Porsche 911 GT3: 996 | 1999-2005

Other Suspension Kits for 996 Carrera / GT2 / GT3

RoadSport Coilover Kit (996 Carrera only)
NTR-R1 Coilover Kit
NTR-R1 Coilover Kit w/ Standalone FAL
NTR-R3 Coilover Kit
NTR-R3 Coilover Kit w/ Standalone FAL
elec-TRON RoadSport Coilover Kit (996 Carrera only)
elec-TRON R1 Coilover Kit
elec-TRON R3 Coilover Kit
elec-TRON R3 Coilover Kit w/ Standalone FAL

Notes

This kit requires the Nitron DCU to work
Fits base 996 Carrera 2 models only
Custom spring rates also available, please contact us directly here for more information or for a consultation on custom rates
Images used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

Frequently Asked Questions

Does the FAL affect the suspension tune or the elec-TRON system in any way? No. The lift operates independently of both the damper setup and the DCU. It does not affect spring rates, valving, or ride height when not in use. Once the front axle comes back down the car behaves exactly as it would without the FAL fitted.
Does the DCU come included with this kit? No. The Nitron DCU is required for the elec-TRON system to operate and is sold separately. The coilover kit and FAL ship without it and the active damping system will not function until the DCU is connected.

About Nitron Suspension

Nitron Suspension has been at the forefront of precision suspension engineering since 1998, founded by Guy Evans with the goal of building high-performance shocks for enthusiasts and professionals alike. Over 200 dealers now carry Nitron products across Europe, Asia, the US, Australasia, and Africa. In 2008, the company moved into a dedicated facility in the UK’s Motorsport Valley, adding dynamometers, 5-axis CNC machines, and 3D CAD capabilities to support both growing demand and continued product development. A second expansion came in 2023 with a new office in Murrieta, California. The team behind every Nitron product draws from deep backgrounds in machining, materials technology, hydraulics, bike engineering, and F1 racing, with many engineers bringing firsthand experience as competitive drivers and riders. That depth of knowledge across both the technical and competitive sides of motorsport shapes every product Nitron develops.

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Nitron elec-TRON R1 Coilover Kit with Standalone FAL for 996 Porsche 911 Carrera / GT2 / GT3 [NTCPO021ER1+FAL]

Guaranteed Safe Checkout