How does the ClubSport differ from the FastRoad in terms of setup and intended use?

The ClubSport runs stiffer spring rates, 600lbs/inch front and 850lbs/inch rear versus the FastRoad's 400 and 650, with firmer valving and a lower ride height. It is built for drivers whose primary use is track, with road use as a secondary consideration. The FastRoad is the opposite; road-first with enough performance headroom for circuit work.

Does the FAL interfere with the suspension tune or damping setup in any way?

No. The lift system operates independently of the damper setup. It does not affect spring rates, valving, or ride height when not in use. Once the axle comes back down the car behaves exactly as it would without the FAL fitted.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Nitron NTR-R1 ClubSport Coilover Kit w/ Standalone FAL for 131 Lotus Emira (with V6)

The Nitron NTR R1 ClubSport Coilover Kit with Standalone Front Axle Lift for the Type 131 Lotus Emira V6 pairs track-focused suspension hardware with a practical solution for drivers who still need the car on the road between sessions. Four hand-built, inverted dampers with stiffer springs, firmer valving, and a lower ride height than the FastRoad put chassis control and on-track consistency first, and every unit shares design DNA with the R3 system used in full race builds. The Standalone FAL addresses the one trade-off that comes with running a car at ClubSport ride heights on the road. With 25mm of front axle lift on demand, steep driveways, speed bumps, and parking lot ramps stop being a problem without requiring any changes to the suspension setup and without affecting how the car behaves once you are back on road or circuit. Titanium and hard-anodised components resist corrosion, the kit ships preset with bearing spacers ready to bolt on, and the whole thing is fully serviceable and upgradeable to R3 or custom specifications.

The Nitron Front Axle Lift (FAL)

Running a Type 131 Lotus Emira V6 at ClubSport ride heights on the road comes with a familiar set of frustrations; steep driveways, speed bumps, and parking lot ramps that sit just low enough to make every approach a calculation. The Nitron Standalone Front Axle Lift system is built around that specific problem. With 25mm of lift available at the front axle, it clears the obstacles that lower ride heights make problematic without requiring any changes to the suspension setup and without affecting how the car performs once you’re back on the road or circuit. It’s a practical addition to a performance suspension package, not a compromise of one.
- 250W pump
- 25mm lift height
- Typical lift time under 3-seconds
- Audible in-cabin warning system
- Switch with built-in warning light
- Auto off function
- Protects your car from damage caused by steep driveways and speed bumps
- Compatible with a wide range of suspension setups

Unique Technology

Every Nitron shock starts with precision components that have been through a thorough design and development process before they reach final assembly. The modular construction gives engineers the flexibility to tailor each application properly, without compromising how individual parts are made or how they perform together. Components are machined to tight tolerances and inspected one by one by trained technicians as part of a strict quality control process. New materials, finishes, and processes go through extensive validation before adoption, with Nitron-specific technologies integrated to produce shocks that genuinely outlast and outperform competing options on the road and track. That standard of engineering is what Nitron’s reputation is built on.

Bespoke Engineering

Nitron doesn’t pull a generic damper off a shelf and adjust the valving to fit the Type 131 Lotus Emira V6. Every application goes through a dedicated development process, with components, spring rates, and damping characteristics engineered specifically for the platform in question. The geometry, weight distribution, and suspension travel of the Emira V6 are factored into the design from the start, not compensated for after the fact. It’s the difference between a ClubSport kit built for this car and one built for a category of cars it happens to fall into.

Features

Internal reservoir type
2-way combined adjustment
Full alloy body
Preload adjuster
Combined 24 clicks of adjustment
Nitrogen gas charged
Nitron FAL raises 25mm at the shock
Precision bearing spacers supplied as required
Consists of 4 coilovers and adjustable top mounts (+FAL kit)
FAL kit contains all components (cylinders, hydraulic lines, pump, wiring loom and controller)
Hand made to order

Specifications

Coilover Type: NTR-R1 ClubSport with standalone FAL (front axle lift)
Adjustment Type: 2-way combined
Adjustment: 24 clicks combined
Mounting Brackets: Not required
Recommended Spring Rates:
- Front: 600lbs/inch (105N/mm)
- Rear: 850lbs/inch (149N/mm)

Applications

Lotus Emira: 131 | 2022-present | 2GR-FE 3.5L V6 supercharged

Other Suspension Kits for Lotus Emira V6

NTR-R1 FastRoad Coilover Kit
NTR-R1 FastRoad Coilover Kit w/ Standalone FAL
NTR-R1 ClubSport Coilover Kit
NTR-R3 FastRoad Coilover Kit
NTR-R3 FastRoad Coilover Kit w/ Standalone FAL
NTR-R3 ClubSport Coilover Kit
NTR-R3 ClubSport Coilover Kit w/ Standalone FAL
elec-TRON R1 FastRoad Coilover Kit
elec-TRON R1 FastRoad Coilover Kit w/ Standalone FAL
elec-TRON R1 ClubSport Coilover Kit
elec-TRON R1 ClubSport Coilover Kit w/ Standalone FAL
elec-TRON R3 FastRoad Coilover Kit
elec-TRON R3 FastRoad Coilover Kit w/ Standalone FAL
elec-TRON R3 ClubSport Coilover Kit
elec-TRON R3 ClubSport Coilover Kit w/ Standalone FAL

Notes

Only compatible on V6 models, does not fit models equipped with 2.0L I4 turbocharged engine
Custom spring rates also available, please contact us directly here for more information or for a consultation on custom rates
Images used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
Precision bearing spacers supplied as required

Frequently Asked Questions

How does the ClubSport differ from the FastRoad in terms of setup and intended use? The ClubSport runs stiffer spring rates, 600lbs/inch front and 850lbs/inch rear versus the FastRoad’s 400 and 650, with firmer valving and a lower ride height. It is built for drivers whose primary use is track, with road use as a secondary consideration. The FastRoad is the opposite; road-first with enough performance headroom for circuit work.
Does the FAL interfere with the suspension tune or damping setup in any way? No. The lift system operates independently of the damper setup. It does not affect spring rates, valving, or ride height when not in use. Once the axle comes back down the car behaves exactly as it would without the FAL fitted.

About Nitron Suspension

Nitron Suspension has been at the forefront of precision suspension engineering since 1998, founded by Guy Evans with the goal of building high-performance shocks for enthusiasts and professionals alike. Over 200 dealers now carry Nitron products across Europe, Asia, the US, Australasia, and Africa. In 2008, the company moved into a dedicated facility in the UK’s Motorsport Valley, adding dynamometers, 5-axis CNC machines, and 3D CAD capabilities to support both growing demand and continued product development. A second expansion came in 2023 with a new office in Murrieta, California. The team behind every Nitron product draws from deep backgrounds in machining, materials technology, hydraulics, bike engineering, and F1 racing, with many engineers bringing firsthand experience as competitive drivers and riders. That depth of knowledge across both the technical and competitive sides of motorsport shapes every product Nitron develops.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Nitron NTR-R1 ClubSport Coilover Kit w/ Standalone FAL for 131 Lotus Emira (with V6) [NTCLO031R1_CS+FAL]

Guaranteed Safe Checkout

Nitron NTR-R1 ClubSport Coilover Kit w/ Standalone FAL for 131 Lotus Emira (with V6)

The Nitron Front Axle Lift (FAL)

Unique Technology

Bespoke Engineering

Features

Specifications

Applications

Other Suspension Kits for Lotus Emira V6

Notes

Frequently Asked Questions

About Nitron Suspension

Reviews