Is the Wilwood Road Race Brake Kit for Acura Integra suitable for street use?

This Road Race Brake Kit for Acura Integra is set up for dedicated track cars. Its BP-35 race pads wear the pads and rotors early when run cold for long periods, so a car that also sees the street should run a street pad.

Which brake lines do I need?

Lines are sold separately. Wilwood specifies Flexline kit 220-6420 for the 1990-2001 Integra and 1990-2000 Civic, 220-6860 for the 2001-2005 Civic including the EP3 Si, and 220-11790 for the Fit. Bulletproof Automotive can confirm the right kit for your car.

Will my 15 inch wheels clear the kit?

Only some will. Wilwood says the kit needs 15 inch wheels with additional inside clearance for the larger caliper and 11.75 inch rotor. Print the clearance diagram from the gallery at full scale and check it against your wheel first.

Does it work with my factory master cylinder?

Wilwood designed it to. Wilwood sizes the piston volume for OE power boosters with 15/16 inch to 1.00 inch bore master cylinders. The calipers also suit manual brake conversions and balance bar pedals when paired with a matched master cylinder.

What does installation involve?

The factory caliper, rotor and dust shield come off, the radial brackets bolt to the OE spindle and the hats and rotors mount to the factory hubs. Wilwood calls for thread locker and safety wire on the bracket bolts, then a full bleed.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Wilwood Dynapro Radial Front Road Race Brake Kit for Acura Integra, Honda Civic and Honda Fit

Wilwood’s Dynapro Radial Front Road Race Brake Kit for Acura Integra, Honda Civic and Honda Fit is built for 4-lug Honda track cars. It replaces the factory 262mm front brake with forged Dynapro radial mount calipers and 11.75in GT slotted rotors on forged aluminum hats, mounted to the OE hubs and spindles.

Features

Forged Dynapro radial mount calipers in Type III hard anodize
Four Thermlock pistons per caliper to reduce heat soak
11.75in GT slotted Spec-37 iron rotors
Forged aluminum hats and radial mount brackets
Road Race Brake Kit for Acura Integra with BP-35 endurance pads

Specifications

Caliper: Wilwood Dynapro Radial Mount, forged, four-piston, Type III hard anodize
Piston bores: 1.62in (x2) per side, Thermlock pistons
Piston area: 4.12 sq in
Pad shape, area and volume: 7816, 6.36 sq in, 3.0 cu in
Pad compound: BP-35 race
Rotor size: 11.75in x 0.81in (298.5mm x 20.6mm)
Rotor: GT slotted, 36 curved vanes, Spec-37 iron, directional
Rotor hat: Forged aluminum, 0.900in offset
Hat bolt circle: 4 x 100mm
Minimum wheel diameter: 15in with extra inside clearance

What’s Included

Wilwood Dynapro radial mount calipers (L/R)
11.75in GT slotted rotors (L/R)
Forged aluminum rotor hats (x2)
BP-35 race brake pad set
Radial mount brackets and hardware

Applications

Acura Integra: 1990-1996 | all trims
Acura Integra: 1997-2001 | all trims except Type R
Acura EL: 2001-2005 | all trims (Canada)
Honda Civic Coupe: EX 1993-1995 | EX with rear disc 1994-1995 | EX 1996-2000 | Si 1999-2000
Honda Civic Hatchback: Si | 1994-1995
Honda Civic Sedan: EX 1990-2000 | EX with rear disc 1992-1995 | LX 1994-1996
Honda Civic: DX, HX, LX, EX and GX 2001-2005 | VP 2005
Honda Civic Si and SiR: EP3 | 2002-2003
Honda Civic del Sol: rear disc models | VTEC 1994-1997 | Si 1995-1997
Honda Fit: GD / GE | Base and Sport 2007-2013 | DX and LX 2008-2013 | EX 2012-2013 | DX-A 2012

Notes

Covers both front corners
Requires OE hubs and spindles from a car built with 262mm (10.32in) front rotors
Brake lines are not included; see the FAQ below for the Wilwood Flexline kit that matches your car
Needs 15in wheels with extra inside clearance; check the wheel clearance diagram in the gallery
The factory dust shields come off during installation
BP-35 race pads wear early with extended low temperature use
For help with line kits or street pads, contact us
Wilwood recommends professional installation

Frequently Asked Questions

Is the Wilwood Road Race Brake Kit for Acura Integra suitable for street use? This Road Race Brake Kit for Acura Integra is set up for dedicated track cars. Its BP-35 race pads wear the pads and rotors early when run cold for long periods, so a car that also sees the street should run a street pad.
Which brake lines do I need? Lines are sold separately. Wilwood specifies Flexline kit 220-6420 for the 1990-2001 Integra and 1990-2000 Civic, 220-6860 for the 2001-2005 Civic including the EP3 Si, and 220-11790 for the Fit. Bulletproof Automotive can confirm the right kit for your car.
Will my 15 inch wheels clear the kit? Only some will. Wilwood says the kit needs 15 inch wheels with additional inside clearance for the larger caliper and 11.75 inch rotor. Print the clearance diagram from the gallery at full scale and check it against your wheel first.
Does it work with my factory master cylinder? Wilwood designed it to. Wilwood sizes the piston volume for OE power boosters with 15/16 inch to 1.00 inch bore master cylinders. The calipers also suit manual brake conversions and balance bar pedals when paired with a matched master cylinder.
What does installation involve? The factory caliper, rotor and dust shield come off, the radial brackets bolt to the OE spindle and the hats and rotors mount to the factory hubs. Wilwood calls for thread locker and safety wire on the bracket bolts, then a full bleed.

About Wilwood

Wilwood Engineering was founded by Bill Wood in 1977 and remains privately owned, with its calipers, rotors and components machined, assembled and tested at its own facility of more than 200,000 square feet in Camarillo, California. The company grew out of racing and aftermarket performance braking, and the same engineering now supplies original equipment work as well: Wilwood has been a Tier 1 supplier of brake calipers, rotors and pads to AM General for the military Humvee since 2008.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Wilwood Dynapro Radial Front Road Race Brake Kit for Acura Integra, Honda Civic and Honda Fit [140-14940]

Guaranteed Safe Checkout

Wilwood Dynapro Radial Front Road Race Brake Kit for Acura Integra, Honda Civic and Honda Fit

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Wilwood

Reviews