Is the Voltex S2000 side mount wing available in other sizes or end plates?

No. This listing of the Voltex S2000 side mount wing is a fixed configuration: 1600mm wet carbon with a 245mm bracket and Type B end plate. No other width, material, or end plate option is offered on this SKU.

Will this wing fit my S2000?

Yes. The V bracket and 245mm stand are built for the AP1 (2000-2003) and AP2 (2004-2009) Honda S2000, using standard mounting points rather than a swan neck or special base.

How is this different from the Voltex swan neck wing?

The Voltex S2000 side mount wing uses a wide-mount V bracket and a 300mm airfoil, while the swan neck Type 7.5 wing uses a center-mount swan neck and a 378mm airfoil with a special base. Both fit the S2000, but the mounting hardware and airfoil depth differ.

What is the V bracket?

The V bracket is Voltex's standard wide-mount hardware, using V-style stands to add stability and smoother airflow compared to a basic flat mount. It is not the same hardware as the swan neck system used on other Voltex wings.

Why wet carbon instead of dry carbon?

This listing is built in wet carbon, a resin-rich carbon fiber layup with a deep gloss finish. Dry carbon, cured under pressure for a lighter weight, is available on other Voltex configurations but not on this particular listing.

How is this wing sold and what are the lead times?

Every Voltex wing is hand-built and made to order in Suzuka, Japan, so it isn't held in stock. Lead times apply and vary by production queue; contact us for a current estimate before ordering.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Voltex 1600mm Wet Carbon Type-2 GT Wing with 245mm Brackets (Side Mount) for AP1 and AP2 Honda S2000

The Voltex S2000 side mount wing is Voltex’s Type 2 GT wing, hand-built in Suzuka, Japan, and recommended for rounded-rear-end FR platforms like the AP1 and AP2 Honda S2000. It runs a 300mm airfoil on a wide-mount V bracket, carried by a 245mm stand that bolts into the S2000’s standard mounting points, no swan neck hardware or special base involved.

Features

Wide-mount V bracket setup, Voltex’s standard mounting system for stability and smoother airflow
300mm airfoil depth, recommended for FR platforms with rounded rear ends like the S2000
245mm stand height for the AP1 / AP2 S2000-specific mounting points
Fixed 1600mm wet carbon construction with optional end plates
Standard mounts install without special base

Specifications

Depth: 300mm
Width: 1600mm
Material: Wet carbon
Mounting: Side Mount bracket, AP1 / AP2 S2000-specific fitment
Bracket height: 245mm

Applications

Honda S2000: AP1, AP2| 2000-2009

Notes

Made to order in Japan; lead times apply.
This is a fixed configuration: 1600mm, wet carbon, 245mm bracket, Type B end plate. No other options are offered on this listing.

Frequently Asked Questions

Is the Voltex S2000 side mount wing available in other sizes or end plates? No. This listing of the Voltex S2000 side mount wing is a fixed configuration: 1600mm wet carbon with a 245mm bracket and Type B end plate. No other width, material, or end plate option is offered on this SKU.
Will this wing fit my S2000? Yes. The V bracket and 245mm stand are built for the AP1 (2000-2003) and AP2 (2004-2009) Honda S2000, using standard mounting points rather than a swan neck or special base.
How is this different from the Voltex swan neck wing? The Voltex S2000 side mount wing uses a wide-mount V bracket and a 300mm airfoil, while the swan neck Type 7.5 wing uses a center-mount swan neck and a 378mm airfoil with a special base. Both fit the S2000, but the mounting hardware and airfoil depth differ.
What is the V bracket? The V bracket is Voltex’s standard wide-mount hardware, using V-style stands to add stability and smoother airflow compared to a basic flat mount. It is not the same hardware as the swan neck system used on other Voltex wings.
Why wet carbon instead of dry carbon? This listing is built in wet carbon, a resin-rich carbon fiber layup with a deep gloss finish. Dry carbon, cured under pressure for a lighter weight, is available on other Voltex configurations but not on this particular listing.
How is this wing sold and what are the lead times? Every Voltex wing is hand-built and made to order in Suzuka, Japan, so it isn’t held in stock. Lead times apply and vary by production queue; contact us for a current estimate before ordering.

About Voltex

Voltex Racing is a Japanese aerodynamics manufacturer based in Suzuka, Japan, producing GT wings, diffusers, spoilers, and body kits. The company pairs aerodynamic efficiency with aggressive design, using carbon fiber and FRP for lightweight strength. All Voltex products are hand-built and made to order.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.