How much power does the Competition Package for 991.2 Turbo add?

VF Engineering quotes 680 hp and 625 lb-ft for its Competition Package for 991.2 Porsche 911 Turbo and Turbo S models. Against the factory 540 hp and 486 lb-ft of the Turbo, that is a gain of 140 hp and 139 lb-ft. A Turbo S starts from a higher factory rating.

What is the difference between the two options?

Software Only supplies the Competition calibration alone for $2,495. Software + Stainless Steel Exhaust adds a VF exhaust system in 321 stainless steel for $4,195. VF Engineering publishes one set of figures for the package and designs the exhaust for track use.

How does it compare with the Performance ECU Software?

VF rates its Performance ECU Software for the 991.2 Turbo at 650 hp and 605 lb-ft, also priced at $2,495. The Competition Package is quoted at 680 hp and 625 lb-ft, and VF Engineering positions it as the track option of the two.

How is the Competition Package installed?

VF Engineering supplies the software as an end user programmable file, loaded by the owner through the OBDII port, and the factory calibration can be restored at any time. Ask Bulletproof Automotive about fitting the exhaust when choosing the Software + Stainless Steel Exhaust option.

Does it fit the 991.1 or 992 Turbo?

No. This package is written for the 3.8 liter engine of the 2017 to 2019 cars. The 991.1 and 992.1 Turbo each take their own VF Competition Package, sold as separate listings at Bulletproof Automotive. Give Bulletproof Automotive the model year when ordering.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

VF Engineering Competition Package for 991.2 Porsche 911 Turbo and Turbo S

VF Engineering’s Competition Package for 991.2 Porsche 911 Turbo and Turbo S is VF’s strongest file for the 2017-2019 Turbo, sold either as software alone or with a VF stainless steel exhaust developed with Redstar USA. Against the 540 hp and 486 lb-ft Porsche quoted for the Turbo, VF publishes 680 hp and 625 lb-ft for the package, gains of 140 hp and 139 lb-ft, and 30 hp beyond its Performance software. The Turbo S leaves the factory with more, so its step is smaller. Boost, ignition and fueling are revised on the factory turbochargers, and with all-wheel drive, rear-axle steering and PDK the car deploys the result cleanly. VF designs the exhaust for track use, and the package suits an owner who drives the Turbo on circuits.

Features

VF-quoted 680 hp and 625 lb-ft for the package
Gain of 140 hp and 139 lb-ft over the factory Turbo
Choice of Software Only or Software + Stainless Steel Exhaust
VF exhaust developed with Redstar USA
Exhaust in 321 stainless steel with a 2.0 mm wall, TIG welded and back-purged
Software loaded through the OBDII port

Applications

Porsche 911 Turbo: 991.2 | 2017-2019 | 3.8L twin-turbo flat-6
Porsche 911 Turbo S: 991.2 | 2017-2019 | 3.8L twin-turbo flat-6

Notes

The Software Only option of this Competition Package for 991.2 Porsche 911 Turbo and Turbo S supplies no hardware
The gains are measured against the factory 540 hp Turbo; the Turbo S starts from a higher rating
The Software + Stainless Steel Exhaust option adds a VF stainless steel exhaust system, which VF Engineering designs for track use
VF Engineering publishes one set of Competition figures for this package and gives no separate figure for the Software Only option
VF Engineering’s material specification lists 321 stainless steel for the exhaust, although one line of its description names 304
For a milder VF calibration, see the VF Engineering Performance ECU Software for 991.2 Porsche 911 Turbo and Turbo S

Frequently Asked Questions

How much power does the Competition Package for 991.2 Turbo add? VF Engineering quotes 680 hp and 625 lb-ft for its Competition Package for 991.2 Porsche 911 Turbo and Turbo S models. Against the factory 540 hp and 486 lb-ft of the Turbo, that is a gain of 140 hp and 139 lb-ft. A Turbo S starts from a higher factory rating.
What is the difference between the two options? Software Only supplies the Competition calibration alone for $2,495. Software + Stainless Steel Exhaust adds a VF exhaust system in 321 stainless steel for $4,195. VF Engineering publishes one set of figures for the package and designs the exhaust for track use.
How does it compare with the Performance ECU Software? VF rates its Performance ECU Software for the 991.2 Turbo at 650 hp and 605 lb-ft, also priced at $2,495. The Competition Package is quoted at 680 hp and 625 lb-ft, and VF Engineering positions it as the track option of the two.
How is the Competition Package installed? VF Engineering supplies the software as an end user programmable file, loaded by the owner through the OBDII port, and the factory calibration can be restored at any time. Ask Bulletproof Automotive about fitting the exhaust when choosing the Software + Stainless Steel Exhaust option.
Does it fit the 991.1 or 992 Turbo? No. This package is written for the 3.8 liter engine of the 2017 to 2019 cars. The 991.1 and 992.1 Turbo each take their own VF Competition Package, sold as separate listings at Bulletproof Automotive. Give Bulletproof Automotive the model year when ordering.

About VF Engineering

VF Engineering designs supercharger and turbocharger systems, titanium exhausts and ECU and TCU calibrations from a 15,000 sq ft facility in Anaheim, Orange County, California, where it has been based for nearly two decades. Every calibration is developed in house on the company’s own Mustang AWD 500 chassis dyno, ECU boards are handled in a dedicated clean room, and new parts start in an R&D room equipped with a rapid prototyper. VF reports that more than 93 percent of its supercharger systems are still running after years of hard use, many on their second or third owner, and its engineers carry the testing discipline of the Lamborghini Super Trofeo series into every road calibration.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

VF Engineering Competition Package for 991.2 Porsche 911 Turbo and Turbo S

Guaranteed Safe Checkout

VF Engineering Competition Package for 991.2 Porsche 911 Turbo and Turbo S

Features

Applications

Notes

Frequently Asked Questions

About VF Engineering

Reviews