Does the Brake Cooling Kit for Toyota GR Corolla include new axle nuts?

No, not unless you choose that option. Verus Engineering highly suggests replacing the axle nuts when installing the Brake Cooling Kit for Toyota GR Corolla, and offers a pair of OEM axle nuts as an option on this listing. Choose Pair Included under OEM Axle Nuts to have them arrive with the kit, ready for the install.

Which Verus kit suits the GR Corolla Morizo Edition?

Verus Engineering builds a separate Morizo Brake Cooling Kit designed specifically for that car, which leaves the factory with its own bespoke brake ducts. The Morizo kit feeds from the factory inlet ducting through a carbon nylon duct on the fender liner, while this kit takes air through a 3D printed inlet bolted to the front bumper.

How does the kit cool the brakes?

It captures high-pressure air at the front bumper with a 3D printed carbon nylon inlet and carries it through 2.5 inch silicone hose to a stainless backing plate. There a 3D printed 316L stainless duct aims the air into the center of the rotor, and the backing plate itself adds further flow, raising the cooling capacity of the whole brake system.

How long does installation take?

Allow a few hours and a basic set of hand tools; Verus Engineering laid the kit out like a factory part, so little specialist know-how is needed. Every part arrives ready to fit, with hoses cut to length, four stainless clamps and all the hardware, and Verus publishes an install manual and an install video. Plan to replace the axle nuts during the job, as Verus recommends.

When does a GR Corolla need brake cooling?

Once you lap regularly or notice fade. Verus Engineering designed the kit to maximize brake cooling efficiency and help the brakes do their job, which brings more consistent performance, lower lap times and a better driving experience on track. The kit feeds the rotors fresh air whenever the car is at speed, which is when brake temperatures climb.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Verus Engineering Full Brake Cooling Kit for Toyota GR Corolla

Verus Engineering’s Full Brake Cooling Kit for Toyota GR Corolla takes fresh, high-pressure air from the front bumper and drives it into the center of each rotor by the shortest path the car allows. A 3D printed carbon nylon inlet bolts onto the factory bumper, pre-cut high-temperature silicone hose carries the air back, and a stainless backing plate with a riveted 316L stainless duct, also 3D printed, aims it at the rotor. Verus laid it out in an OEM-style format from in-house scan data, and it is the kit to fit before a GR Corolla starts regular track days.

Features

Inlet sits in a high-pressure area of the front bumper
Rotor-center delivery through a 3D printed 316L duct
Backing plate shaped to raise flow into the rotor
Short routing to maximize cooling efficiency
Made in the U.S.A.

What’s Included

Backing plates with riveted 316L 3D printed stainless ducts (x2, L/R)
3D printed carbon nylon inlet ducts (x2)
2.5 inch pre-cut high-temperature silicone brake hose (x2)
2.5 inch stainless hose clamps (x4)
Complete hardware kit
Pair of OEM axle nuts, with the Pair Included option

Applications

Toyota GR Corolla | 2023-present

Notes

Verus highly suggests replacing the axle nuts during installation; choose Pair Included to add a set of OEM axle nuts
The Brake Cooling Kit for Toyota GR Corolla is not the Morizo Edition kit; for that car, see the Verus Engineering Morizo Brake Cooling Kit for Toyota GR Corolla
Verus walks through the standard kit install in a manual and a video
See every Verus Engineering part for the Toyota GR Corolla
Verus covers its parts with a 1-year limited warranty against manufacturing defects

Frequently Asked Questions

Does the Brake Cooling Kit for Toyota GR Corolla include new axle nuts? No, not unless you choose that option. Verus Engineering highly suggests replacing the axle nuts when installing the Brake Cooling Kit for Toyota GR Corolla, and offers a pair of OEM axle nuts as an option on this listing. Choose Pair Included under OEM Axle Nuts to have them arrive with the kit, ready for the install.
Which Verus kit suits the GR Corolla Morizo Edition? Verus Engineering builds a separate Morizo Brake Cooling Kit designed specifically for that car, which leaves the factory with its own bespoke brake ducts. The Morizo kit feeds from the factory inlet ducting through a carbon nylon duct on the fender liner, while this kit takes air through a 3D printed inlet bolted to the front bumper.
How does the kit cool the brakes? It captures high-pressure air at the front bumper with a 3D printed carbon nylon inlet and carries it through 2.5 inch silicone hose to a stainless backing plate. There a 3D printed 316L stainless duct aims the air into the center of the rotor, and the backing plate itself adds further flow, raising the cooling capacity of the whole brake system.
How long does installation take? Allow a few hours and a basic set of hand tools; Verus Engineering laid the kit out like a factory part, so little specialist know-how is needed. Every part arrives ready to fit, with hoses cut to length, four stainless clamps and all the hardware, and Verus publishes an install manual and an install video. Plan to replace the axle nuts during the job, as Verus recommends.
When does a GR Corolla need brake cooling? Once you lap regularly or notice fade. Verus Engineering designed the kit to maximize brake cooling efficiency and help the brakes do their job, which brings more consistent performance, lower lap times and a better driving experience on track. The kit feeds the rotors fresh air whenever the car is at speed, which is when brake temperatures climb.

About Verus Engineering

Verus Engineering designs aerodynamic and performance parts in Indianapolis, Indiana. Two engineers founded it in late 2014 as Velox Motorsports and renamed it in 2017 after a trademark dispute; verus is Latin for true or complete. Each design starts from a 3D scan of the car, is developed with CFD and finite element analysis and is validated on track, across more than 20 platforms from the GR86 to the C8 Corvette.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.