Will these camber plates fit my coilovers?

Yes, with exceptions. The plates replace the factory top hats directly, and Verus Engineering lists three suspension units that need a different top nut or pillow ball nut than the one supplied: Koni Yellow struts, Tein coilovers and Ohlins Road and Track coilovers. Owners of those units should source the correct nut from the coilover maker first.

How much camber does the Camber Plate Assembly for Toyota 86 add?

The Camber Plate Assembly for Toyota 86 allows up to -3 degrees of front camber at stock ride height without camber bolts, on the 86, GR86, FR-S and BRZ. Lowered cars sit at different geometry, so the usable range shifts with ride height, but Verus Engineering designed the plates to reach that figure on a car at factory height.

Do camber plates change ride height?

No. Verus Engineering designed the plates to retain the same installed height as the factory top hats, so the car sits where it did before. The change is in the mount itself: a PTFE lined spherical bearing reduces compliance at the top of the strut, and each plate saves 15 oz over the original part.

How long do the spherical bearings last?

Verus Engineering chose high-end wide series spherical bearings so the plates gain driver feel without giving up longevity. Each bearing is PTFE lined and runs a 440 stainless ball in a 17-4 PH stainless race, inside billet 6061-T6 aluminum that is anodized for corrosion resistance, a combination built for long service on street and track.

Do the plates fit the newer GR86 and BRZ?

Yes. Verus Engineering lists the front camber plates for the BRZ, FR-S, GT86 and GR86, which covers the first-generation Scion FR-S, Subaru BRZ and Toyota 86 as well as the second-generation Toyota GR86 and Subaru BRZ sold from 2022. The same assemblies, bushings and nuts are used across all of these cars.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Verus Engineering Front Camber Plate Assembly for Toyota 86, GR86, Scion FR-S and Subaru BRZ

Verus Engineering’s Front Camber Plate Assembly for Toyota 86, GR86, Scion FR-S and Subaru BRZ replaces the factory top hats and allows up to -3 degrees of front camber at stock ride height, with no camber bolts. Each plate carries a wide series spherical bearing, PTFE lined with a 440 stainless ball and a 17-4 PH stainless race, which reduces compliance and sharpens steering feel. Installed height matches the factory part, so the car sits where it did before. On a car that sees track days, more negative camber stops the outside tire rolling onto its edge in corners; a commuter gains less.

Construction

The plates are machined from billet 6061-T6 aluminum and anodized for corrosion resistance, in blue, black or red. Clinch press-in studs give an OEM-like install, every fastener is stainless, and each side weighs 15 oz less than the factory part. Verus makes them in the U.S.A.

Features

Up to -3 degrees of front camber at stock ride height
Quick, simple camber adjustment
Lightweight design that saves 15 oz per side
Wide series PTFE-lined spherical bearing for sharper steering feel
Same installed height as the factory top hats

What’s Included

Camber plate assemblies (L/R)
Spherical bushings (x2)
Spherical nuts (x2)

Applications

Scion FR-S: ZN6 | 2013-2016
Subaru BRZ: ZC6 | 2013-2020
Subaru BRZ: ZD8 | 2022-present
Toyota 86: ZN6 | 2017-2020
Toyota GR86: ZN8 | 2022-present

Notes

Koni Yellow struts, Tein coilovers and Ohlins Road and Track coilovers need a different top nut or pillow ball nut than the one supplied
The Camber Plate Assembly for Toyota 86 replaces the factory top hats directly and keeps the factory installed height
Pair the plates with the 7000 Series Rear Lower Control Arm Kit to adjust camber at the rear as well
Verus publishes an install manual and an install video for the camber plates
See every Verus Engineering part for the Toyota 86 and GR86
Verus covers its parts with a 1-year limited warranty against manufacturing defects

Frequently Asked Questions

Will these camber plates fit my coilovers? Yes, with exceptions. The plates replace the factory top hats directly, and Verus Engineering lists three suspension units that need a different top nut or pillow ball nut than the one supplied: Koni Yellow struts, Tein coilovers and Ohlins Road and Track coilovers. Owners of those units should source the correct nut from the coilover maker first.
How much camber does the Camber Plate Assembly for Toyota 86 add? The Camber Plate Assembly for Toyota 86 allows up to -3 degrees of front camber at stock ride height without camber bolts, on the 86, GR86, FR-S and BRZ. Lowered cars sit at different geometry, so the usable range shifts with ride height, but Verus Engineering designed the plates to reach that figure on a car at factory height.
Do camber plates change ride height? No. Verus Engineering designed the plates to retain the same installed height as the factory top hats, so the car sits where it did before. The change is in the mount itself: a PTFE lined spherical bearing reduces compliance at the top of the strut, and each plate saves 15 oz over the original part.
How long do the spherical bearings last? Verus Engineering chose high-end wide series spherical bearings so the plates gain driver feel without giving up longevity. Each bearing is PTFE lined and runs a 440 stainless ball in a 17-4 PH stainless race, inside billet 6061-T6 aluminum that is anodized for corrosion resistance, a combination built for long service on street and track.
Do the plates fit the newer GR86 and BRZ? Yes. Verus Engineering lists the front camber plates for the BRZ, FR-S, GT86 and GR86, which covers the first-generation Scion FR-S, Subaru BRZ and Toyota 86 as well as the second-generation Toyota GR86 and Subaru BRZ sold from 2022. The same assemblies, bushings and nuts are used across all of these cars.

About Verus Engineering

Verus Engineering designs aerodynamic and performance parts in Indianapolis, Indiana. Two engineers founded it in late 2014 as Velox Motorsports and renamed it in 2017 after a trademark dispute; verus is Latin for true or complete. Each design starts from a 3D scan of the car, is developed with CFD and finite element analysis and is validated on track, across more than 20 platforms from the GR86 to the C8 Corvette.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Verus Engineering Front Camber Plate Assembly for Toyota 86, GR86, Scion FR-S and Subaru BRZ

Guaranteed Safe Checkout

Verus Engineering Front Camber Plate Assembly for Toyota 86, GR86, Scion FR-S and Subaru BRZ

Construction

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Verus Engineering

Reviews