Will the Front Camber Plate Assembly for G87 work with my coilovers?

Yes, if the coilovers use the OEM top hats. The Front Camber Plate Assembly for G87 replaces the factory top hats, so Verus Engineering lists it as compatible only with coilover systems that retain them. Coilovers with their own top mounts will not accept it, so verify the components before ordering. It also suits factory dampers.

How much camber do the Verus plates allow?

Up to -3 degrees of front camber, according to Verus Engineering, though the figure a given car reaches depends on its suspension setup. The adjustment is quick to make, and the plates work with OE or aftermarket springs on factory dampers and with coilovers that keep the OEM top hats.

Do the camber plates change ride height?

No. Verus Engineering designed the plates as direct replacements for the OEM top hats with the same installed height as the factory units, so the car sits where it did before. Ride height changes only if the springs or dampers are changed at the same time as the plates.

Which BMW models do the camber plates fit?

Verus Engineering lists the plates for the G-Series M2, M3 and M4, covering the G87 M2 from 2023 and the G80 M3 and G82 M4 from 2021. On every car they replace the front top hats, and coilover-equipped cars need a system that uses the OEM top hats for the plates to fit.

What does a spherical bearing top mount change?

A spherical bearing takes the place of a more compliant factory mount, so the strut is located more precisely and the driver feels more of the road through the steering. Verus Engineering uses a wide series, PTFE-lined bearing with a high-strength alloy steel race to add that feel without sacrificing longevity.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Verus Engineering Front Camber Plate Assembly for G87 BMW M2, G80 M3 and G82 M4

Verus Engineering’s Front Camber Plate Assembly for G87 BMW M2, G80 M3 and G82 M4 replaces the factory front top hats with billet 6061-T6 plates that dial in up to -3 degrees of camber, depending on the rest of the suspension. Each plate carries a wide series, PTFE-lined spherical bearing in a high-strength alloy steel race, which reduces compliance and sharpens steering feel without giving up longevity. The plates keep the installed height of the OEM units and suit the owner on factory dampers, with OE or aftermarket springs, who wants more from the front tires on track.

Why Camber Matters

Under cornering load a tire tends to roll onto its outer edge. Negative camber tilts the top of the wheel inward so more tread stays on the road through the corner, which raises grip, corner speed and driver confidence. These plates make that adjustment quick, and Verus machines every aluminum part in house in Indianapolis, then anodizes it in blue, black or red for corrosion resistance.

Features

Up to -3 degrees of front camber, depending on suspension setup
Quick, easy camber adjustment
Wide series spherical bearing, PTFE lined, in a high-strength alloy steel race
Billet 6061-T6 aluminum, anodized for corrosion resistance

What’s Included

Camber plates, assembled (L/R)
Spherical bushings (x2)
Spherical nuts (x2)
Spherical lock nuts (x2)
Hardware bag with every nut and bolt needed for the install

Applications

BMW M2: G87 | 2023-present
BMW M3: G80 | 2021-present
BMW M4: G82 | 2021-present

Notes

Only compatible with coilover systems that use the OEM top hats; verify coilover components before ordering
The Front Camber Plate Assembly for G87 is a direct replacement for the OEM top hats and suits factory dampers with OE or aftermarket springs
Camber changes affect toe, so have the car aligned after installation
Verus provides an install manual and a video walkthrough
See every Verus Engineering part for the G87 BMW M2, G80 M3 and G82 M4
Verus covers its parts with a 1-year limited warranty against manufacturing defects

Frequently Asked Questions

Will the Front Camber Plate Assembly for G87 work with my coilovers? Yes, if the coilovers use the OEM top hats. The Front Camber Plate Assembly for G87 replaces the factory top hats, so Verus Engineering lists it as compatible only with coilover systems that retain them. Coilovers with their own top mounts will not accept it, so verify the components before ordering. It also suits factory dampers.
How much camber do the Verus plates allow? Up to -3 degrees of front camber, according to Verus Engineering, though the figure a given car reaches depends on its suspension setup. The adjustment is quick to make, and the plates work with OE or aftermarket springs on factory dampers and with coilovers that keep the OEM top hats.
Do the camber plates change ride height? No. Verus Engineering designed the plates as direct replacements for the OEM top hats with the same installed height as the factory units, so the car sits where it did before. Ride height changes only if the springs or dampers are changed at the same time as the plates.
Which BMW models do the camber plates fit? Verus Engineering lists the plates for the G-Series M2, M3 and M4, covering the G87 M2 from 2023 and the G80 M3 and G82 M4 from 2021. On every car they replace the front top hats, and coilover-equipped cars need a system that uses the OEM top hats for the plates to fit.
What does a spherical bearing top mount change? A spherical bearing takes the place of a more compliant factory mount, so the strut is located more precisely and the driver feels more of the road through the steering. Verus Engineering uses a wide series, PTFE-lined bearing with a high-strength alloy steel race to add that feel without sacrificing longevity.

About Verus Engineering

Verus Engineering designs aerodynamic and performance parts in Indianapolis, Indiana. Two engineers founded it in late 2014 as Velox Motorsports and renamed it in 2017 after a trademark dispute; verus is Latin for true or complete. Each design starts from a 3D scan of the car, is developed with CFD and finite element analysis and is validated on track, across more than 20 platforms from the GR86 to the C8 Corvette.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Verus Engineering Front Camber Plate Assembly for G87 BMW M2, G80 M3 and G82 M4

Guaranteed Safe Checkout

Verus Engineering Front Camber Plate Assembly for G87 BMW M2, G80 M3 and G82 M4

Why Camber Matters

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Verus Engineering

Reviews