What vehicles is the TREVORA G8X arch clearance kit compatible with?

The TREVORA G8X Front Non-Rub Arch Clearance Kit is compatible with the 2023 and newer BMW M2 G87, the 2020 and newer BMW M3 Sedan G80, the 2022 and newer BMW M3 Touring G81, the 2020 and newer BMW M4 Coupe G82, and the 2020 and newer BMW M4 Convertible G83. Fitment on other BMW models is not confirmed.

Will these plates completely eliminate arch rubbing on my G8X build?

It depends on your specific configuration. For many common aggressive fitment setups on the G8X platform, the plates provide sufficient additional clearance to eliminate rubbing under normal driving conditions. For extreme setups at the outer limits of fitment, the plates significantly reduce contact even if they do not eliminate it entirely. Effectiveness is determined by the combination of wheel diameter, width, offset, tire profile, and suspension setup in use. If you are unsure whether this kit will resolve your specific rubbing issue, contact Bulletproof Automotive with your fitment details before purchasing.

Does installation require cutting or drilling the arch liner?

No. The TREVORA arch clearance plates integrate directly into the G8X front arch structure using the included hardware without cutting, drilling, or any permanent modification to the car. The installation is fully reversible.

What is 1050-grade aluminum and why is it used for these plates?

1050-grade aluminum is a commercially pure aluminum alloy known for its high corrosion resistance, good workability, and structural consistency. In the arch liner environment, these properties translate to a plate that holds its shape reliably under repeated suspension cycles without cracking or deforming, resists corrosion from road debris and moisture, and adds minimal mass to the front of the car. It is a practical material choice for a component in this position.

Does this kit cover both front arches or just one side?

The kit includes both a left and a right front arch clearance plate as a complete pair. No additional purchase is required to cover both sides of the front end.

Is this kit compatible with wheel spacers and lowered suspension?

Yes. The kit is specifically designed with compatibility for wheel spacer and lowered suspension fitment setups in mind, as these are among the most common configurations that cause arch rubbing on the G8X platform. The effectiveness of the plates will still depend on the degree of lowering and the specific spacer thickness in use.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Front Non-Rub Arch Clearance Kit for G8x BMW M2, M3 & M4

Arch rub is one of the most common and frustrating limitations that G8X platform owners encounter when pushing fitment beyond factory specification. Whether the cause is a wider wheel, a more aggressive offset, a wheel spacer, or a lowered suspension setup, the result is the same; the tire contacts the inner arch liner under load, during lock, or at the compression point of a corner. The TREVORA arch clearance kit is built to address this directly, providing additional clearance in the front wheel arches without asking the owner to cut the liner, pull the arch, or make any permanent change to the car. Each kit includes two precision-cut plates, one for each front arch, manufactured from 1050-grade aluminum. This material grade provides the combination of structural rigidity and workability that the arch liner environment requires; stiff enough to maintain its shape and provide reliable clearance under repeated load cycles, light enough to avoid adding meaningful mass to the front end of the car. The plates are precision-cut for direct fitment to the G8X front arch structure and mount securely using the included hardware without modification to the surrounding body.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

1050-grade aluminum construction for rigidity, workability, and low added mass
Precision-cut for direct OEM-level fitment to G8X front wheel arch structures
Reduces or eliminates front tire-to-arch liner contact under load, steering lock, and cornering
Compatible with wider wheels, aggressive offsets, wheel spacers, and lowered suspension setups
No cutting, drilling, or permanent modification to the car required
Fully reversible installation
All installation hardware included
Includes left and right front arch plates as a complete pair
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Left Front Arch Clearance Plate
Right Front Arch Clearance Plate
Installation hardware

Applications

BMW M2: G87 | 2023-present
BMW M3: G80, G81 | 2021-present
BMW M4: G82, G83 | 2021-present
BMW M4: G83 | 2021-present

Frequently Asked Questions

What vehicles is the TREVORA G8X arch clearance kit compatible with? The TREVORA G8X Front Non-Rub Arch Clearance Kit is compatible with the 2023 and newer BMW M2 G87, the 2020 and newer BMW M3 Sedan G80, the 2022 and newer BMW M3 Touring G81, the 2020 and newer BMW M4 Coupe G82, and the 2020 and newer BMW M4 Convertible G83. Fitment on other BMW models is not confirmed.
Will these plates completely eliminate arch rubbing on my G8X build? It depends on your specific configuration. For many common aggressive fitment setups on the G8X platform, the plates provide sufficient additional clearance to eliminate rubbing under normal driving conditions. For extreme setups at the outer limits of fitment, the plates significantly reduce contact even if they do not eliminate it entirely. Effectiveness is determined by the combination of wheel diameter, width, offset, tire profile, and suspension setup in use. If you are unsure whether this kit will resolve your specific rubbing issue, contact Bulletproof Automotive with your fitment details before purchasing.
Does installation require cutting or drilling the arch liner? No. The TREVORA arch clearance plates integrate directly into the G8X front arch structure using the included hardware without cutting, drilling, or any permanent modification to the car. The installation is fully reversible.
What is 1050-grade aluminum and why is it used for these plates? 1050-grade aluminum is a commercially pure aluminum alloy known for its high corrosion resistance, good workability, and structural consistency. In the arch liner environment, these properties translate to a plate that holds its shape reliably under repeated suspension cycles without cracking or deforming, resists corrosion from road debris and moisture, and adds minimal mass to the front of the car. It is a practical material choice for a component in this position.
Does this kit cover both front arches or just one side? The kit includes both a left and a right front arch clearance plate as a complete pair. No additional purchase is required to cover both sides of the front end.
Is this kit compatible with wheel spacers and lowered suspension? Yes. The kit is specifically designed with compatibility for wheel spacer and lowered suspension fitment setups in mind, as these are among the most common configurations that cause arch rubbing on the G8X platform. The effectiveness of the plates will still depend on the degree of lowering and the specific spacer thickness in use.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Trevora Front Non-Rub Arch Clearance Kit for G8x BMW M2, M3 & M4 [TR-BGXACK]

Guaranteed Safe Checkout