What vehicles is the TREVORA PR-1 Carbon Body Kit compatible with?

The PR-1 Carbon Body Kit is compatible with the 2024 and newer BMW M5 Sedan G90 and the 2024 and newer BMW M5 Touring G99. All four components are developed around the shared front and rear bumper architecture of both body styles. Confirm bodywork compatibility for pre-facelift versus facelift variants with Bulletproof Automotive before ordering.

What is included in the PR-1 Carbon Body Kit?

The kit includes four components: the PR-1 pre-preg carbon fiber front splitter, the PR-1 pre-preg carbon fiber side skirt set (left and right), the PR-1 pre-preg carbon fiber three-element rear diffuser, and the PR-1 pre-preg carbon fiber front bumper duct extension set.

Why did the development of this kit involve real-world body scanning?

3D CAD design alone relies on digital models of the vehicle, which can differ from the actual manufactured bodywork in subtle ways that affect panel fit at the component edges. Real-world body scanning captures the exact geometry of the physical G90 and G99 bodywork, allowing TREVORA to develop each component against the actual car rather than a digital approximation. This results in fitment that holds to the same tolerance expectations as factory body panels, which matters on a vehicle where panel gaps are as carefully controlled as they are on the current M5.

What is the three-element rear diffuser and why does it matter aerodynamically?

The three-element rear diffuser uses three separate horizontal elements across the lower rear bumper rather than a single flat panel. Multiple elements generate a larger effective diffuser area for underbody airflow management, creating a more efficient pressure recovery zone beneath the rear of the car and contributing to increased rear stability at speed. The three-element construction also delivers greater visual depth at the rear than a single-element alternative, which is appropriate for a car of the G90 and G99 M5's standing.

How do the front splitter and front bumper duct extensions work together?

The front splitter and front bumper duct extensions are developed as a paired aerodynamic system for the front end of the PR-1 kit. The splitter increases front-end downforce by generating a pressure differential beneath the front bumper. The duct extensions refine the airflow path into the front bumper openings, improving the efficiency of the air management at the front of the car and integrating cleanly with the splitter geometry so the full front end reads as a coherent aerodynamic treatment.

How does the PR-1 kit compare to the individual PR-1 components available for the G90 and G99?

Individual PR-1 components for the G90 and G99, including the front splitter, side skirts, front bumper duct extensions, and rear spoiler, are available as standalone purchases. The PR-1 Carbon Body Kit combines all four in a single purchase and ensures consistent production batch and finish quality across every component in the kit. It also includes the three-element rear diffuser, which is the most aerodynamically comprehensive rear treatment in the PR-1 G90/G99 lineup.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

9Trevora PR-1 Carbon Body Kit for G9x BMW M5

The TREVORA PR-1 kit is the result of more than six months of dedicated development for the G90 and G99 M5 platform, built on over a decade of carbon fiber aero design experience. The use of 3D CAD combined with real-world body scanning of the G90 and G99 bodywork means the fit of each component is derived from the actual geometry of the car rather than from digital models alone; a distinction that matters on a vehicle with the panel fit expectations of the current M5. The PR-1 front splitter introduces sharp aerodynamic lines at the lower front bumper that increase front-end downforce while complementing the assertive visual presence of the G90 front fascia. The splitter geometry connects directly with the front bumper duct extensions, which refine the front-end airflow path and integrate cleanly with the overall front aero treatment. Together, the splitter and duct extensions address the front of the car as an aerodynamic system rather than as individual components. The side skirts follow the M5’s natural shoulder line, adding stance and visual width to the lower body without introducing elements that work against the G90 and G99’s premium character. On a car the size of the M5, proportion matters; the PR-1 skirts are developed to enhance the body’s existing lines rather than impose a separate aesthetic onto them. At the rear, the three-element diffuser manages underbody airflow beneath the rear bumper, contributing to rear stability while providing one of the most visually substantial rear treatments available for the G90 and G99 platform. The three-element construction creates depth and aerodynamic presence that a single-element alternative cannot match.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

Four-component aero kit covering front, sides, rear, and front bumper duct extensions
All components manufactured from high-grade pre-preg carbon fiber with consistent high-gloss finish
PR-1 design developed using 3D CAD and real-world G90/G99 body scanning for precise fitment
Three-element rear diffuser for maximum rear underbody airflow management and visual presence
Front splitter and duct extensions developed as a paired aerodynamic system for the front end
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Carbon fiber front splitter
Carbon fiber side skirt set (left and right)
Carbon fiber rear diffuser (three-element)
Carbon fiber front bumper duct extension set
Required mounting hardware
Installation instructions

Applications

BMW M5: G90, G99 | 2024-present

Frequently Asked Questions

What vehicles is the TREVORA PR-1 Carbon Body Kit compatible with? The PR-1 Carbon Body Kit is compatible with the 2024 and newer BMW M5 Sedan G90 and the 2024 and newer BMW M5 Touring G99. All four components are developed around the shared front and rear bumper architecture of both body styles. Confirm bodywork compatibility for pre-facelift versus facelift variants with Bulletproof Automotive before ordering.
What is included in the PR-1 Carbon Body Kit? The kit includes four components: the PR-1 pre-preg carbon fiber front splitter, the PR-1 pre-preg carbon fiber side skirt set (left and right), the PR-1 pre-preg carbon fiber three-element rear diffuser, and the PR-1 pre-preg carbon fiber front bumper duct extension set.
Why did the development of this kit involve real-world body scanning? 3D CAD design alone relies on digital models of the vehicle, which can differ from the actual manufactured bodywork in subtle ways that affect panel fit at the component edges. Real-world body scanning captures the exact geometry of the physical G90 and G99 bodywork, allowing TREVORA to develop each component against the actual car rather than a digital approximation. This results in fitment that holds to the same tolerance expectations as factory body panels, which matters on a vehicle where panel gaps are as carefully controlled as they are on the current M5.
What is the three-element rear diffuser and why does it matter aerodynamically? The three-element rear diffuser uses three separate horizontal elements across the lower rear bumper rather than a single flat panel. Multiple elements generate a larger effective diffuser area for underbody airflow management, creating a more efficient pressure recovery zone beneath the rear of the car and contributing to increased rear stability at speed. The three-element construction also delivers greater visual depth at the rear than a single-element alternative, which is appropriate for a car of the G90 and G99 M5’s standing.
How do the front splitter and front bumper duct extensions work together? The front splitter and front bumper duct extensions are developed as a paired aerodynamic system for the front end of the PR-1 kit. The splitter increases front-end downforce by generating a pressure differential beneath the front bumper. The duct extensions refine the airflow path into the front bumper openings, improving the efficiency of the air management at the front of the car and integrating cleanly with the splitter geometry so the full front end reads as a coherent aerodynamic treatment.
How does the PR-1 kit compare to the individual PR-1 components available for the G90 and G99? Individual PR-1 components for the G90 and G99, including the front splitter, side skirts, front bumper duct extensions, and rear spoiler, are available as standalone purchases. The PR-1 Carbon Body Kit combines all four in a single purchase and ensures consistent production batch and finish quality across every component in the kit. It also includes the three-element rear diffuser, which is the most aerodynamically comprehensive rear treatment in the PR-1 G90/G99 lineup.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.