Which cars does the Eventuri N55 intake fit?

The Eventuri N55 intake fits BMW F-Chassis cars with the N55 turbocharged inline-six: the F87 M2, F20 / F21 M135i, F22 / F23 M235i, F30 / F31 / F34 335i, and F32 / F33 / F36 435i. It uses factory mounting points for OEM-level fitment. Confirm your car runs the N55 engine before ordering, since fitment follows the engine rather than the badge.

Does it fit the M2 Competition or M2 CS?

No. The Eventuri N55 intake fits the base F87 M2 with the N55 engine only. The M2 Competition and M2 CS use the S55 twin-turbo engine and need a different Eventuri system. If your M2 is a Competition or CS, this is not the correct intake; contact us for the S55 version instead.

How does the Venturi housing improve performance?

The patented carbon fiber Venturi housing promotes smooth, laminar airflow toward the turbocharger. Unlike a cone filter on a simple heat shield, the Venturi geometry reduces turbulence and aerodynamic drag, letting the turbo operate more efficiently across the rev range. Drivers can expect sharper throttle response, improved spool, and a more pronounced induction sound.

Does the Eventuri N55 intake keep intake temperatures down?

Yes. A sealed prepreg carbon duct and laser-cut heat shield isolate the filter from engine bay heat, and a dedicated carbon air scoop continuously channels cooler ambient air into the intake tract. This combination holds intake air temperatures stable even under sustained load, which is central to Eventuri's Complete System design.

Will it affect drivability or throw a fault?

No. The carbon fiber intake tube includes an integrated MAF sensor mount that positions the sensor for precise calibration and OEM-level drivability. The system is designed to preserve everyday usability while improving airflow, so it retains smooth part-throttle behavior alongside the sharper response higher in the rev range.

How many replacement filters does it use?

The Eventuri N55 intake uses one filter. The replacement part is the Eventuri EVE-661-G2-FTR, a Generation 2 high-flow cone filter. It is serviceable and reusable with proper cleaning, so keeping a spare on hand means the car stays on the road while the filter is cleaned and dried.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri Black Carbon V2 Intake System for N55 BMW F Chassis

The Eventuri N55 intake is a full prepreg carbon fiber induction system built around Eventuri’s “Complete System” philosophy for BMW F-Chassis cars running the N55 turbocharged inline-six, balancing unrestricted airflow against consistent thermal efficiency. At its core is a patented carbon fiber Venturi housing that promotes smooth, laminar flow toward the turbocharger; unlike a conventional cone filter on a simple heat shield, the Venturi geometry cuts turbulence and aerodynamic drag so the turbo works more efficiently across the rev range. A sealed carbon duct and heat shield isolate the filter from engine bay heat, while a dedicated carbon air scoop feeds cooler ambient air into the tract for stable performance under sustained load. The intake tube carries an integrated MAF sensor mount (for precise calibration and OEM-level drivability), and the V2 revision sharpens throttle response, turbo spool, and induction sound.

Features

Patented carbon fiber Venturi housing promotes laminar airflow and cuts drag toward the turbo
Generation 2 bespoke high-flow cone filter
Prepreg carbon sealing duct and laser-cut heat shield isolate the filter from engine bay heat
Dedicated carbon fiber air scoop channels cooler ambient air into the intake tract
Carbon fiber intake tube with integrated MAF sensor mount for OEM-level drivability
Precision laser-cut stainless steel mounting brackets
High-quality silicone couplers with BMW-specification hose clamps
V2 revision improves throttle response, turbo spool, and induction acoustics
OEM-level fitment using factory mounting points
Lightweight prepreg carbon fiber construction

Specifications

Material: Prepreg carbon fiber
Housing: Patented carbon fiber Venturi design
Filter: Generation 2 bespoke high-flow cone filter
Intake tube: Prepreg carbon fiber with integrated MAF sensor mount
Thermal management: Sealed carbon duct, laser-cut heat shield, dedicated carbon air scoop
Brackets: Precision laser-cut stainless steel
Couplers: Silicone with BMW-specification hose clamps

Applications

BMW 135i: F20 / F21 | N55
BMW 235i: F22 / F23 | N55 (M235i)
BMW 235i Racing: F22 | N55
BMW 335i: F30 / F31 / F34 | N55
BMW 435i: F32 / F33 / F36 | N55
BMW M2: F87 | N55

Notes

This is the N55 intake. It fits the F87 M2 with the N55 engine only; it does not fit the M2 Competition or M2 CS, which use the S55 engine.
Fitment follows the N55 engine, not the trim badge. Confirm your car runs the N55 before ordering, since several of these chassis were also sold with non-N55 engines.
Check local emissions regulations before installation; the manufacturer’s emissions notice applies.
Designed and hand-assembled in the UK. Warranty coverage and damage-in-transit support are fully provided.

Frequently Asked Questions

Which cars does the Eventuri N55 intake fit? The Eventuri N55 intake fits BMW F-Chassis cars with the N55 turbocharged inline-six: the F87 M2, F20 / F21 M135i, F22 / F23 M235i, F30 / F31 / F34 335i, and F32 / F33 / F36 435i. It uses factory mounting points for OEM-level fitment. Confirm your car runs the N55 engine before ordering, since fitment follows the engine rather than the badge.
Does it fit the M2 Competition or M2 CS? No. The Eventuri N55 intake fits the base F87 M2 with the N55 engine only. The M2 Competition and M2 CS use the S55 twin-turbo engine and need a different Eventuri system. If your M2 is a Competition or CS, this is not the correct intake; contact us for the S55 version instead.
How does the Venturi housing improve performance? The patented carbon fiber Venturi housing promotes smooth, laminar airflow toward the turbocharger. Unlike a cone filter on a simple heat shield, the Venturi geometry reduces turbulence and aerodynamic drag, letting the turbo operate more efficiently across the rev range. Drivers can expect sharper throttle response, improved spool, and a more pronounced induction sound.
Does the Eventuri N55 intake keep intake temperatures down? Yes. A sealed prepreg carbon duct and laser-cut heat shield isolate the filter from engine bay heat, and a dedicated carbon air scoop continuously channels cooler ambient air into the intake tract. This combination holds intake air temperatures stable even under sustained load, which is central to Eventuri’s Complete System design.
Will it affect drivability or throw a fault? No. The carbon fiber intake tube includes an integrated MAF sensor mount that positions the sensor for precise calibration and OEM-level drivability. The system is designed to preserve everyday usability while improving airflow, so it retains smooth part-throttle behavior alongside the sharper response higher in the rev range.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with backgrounds in aeronautics and tuning, all sharing a passion for cars and performance. After owning various aftermarket intakes over the years and being disappointed with gains that seldom lived up to their claims, they decided to take things into their own hands and set a new benchmark in intake design and technology. The goal was to engineer systems that provide real, measurable gains and to publish genuine figures to back them up. Their systems are developed using cutting-edge design, testing, and prototyping methods. Each design undergoes CFD analysis and is validated at the prototype stage through volumetric airflow measurement, intake temperature testing, and extensive dynamometer testing. Eventuri publishes all development data to illustrate the full process from concept to finished product. Only the best materials are selected for every component, down to the choice of fasteners, to ensure the quality of the final product is second to none.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Eventuri Black Carbon Intake System for F Chassis BMW 335i / 435i / M135i / M235i / M2 [EVE-N55V2-CF-INT]

Guaranteed Safe Checkout

Eventuri Black Carbon V2 Intake System for N55 BMW F Chassis

Features

Specifications

Applications

Notes

Frequently Asked Questions

About Eventuri

Reviews