Can the Rear Bumper Valance for McLaren Artura be fitted with the RYFT rear diffuser?

RYFT sells the valance and the rear diffuser as separate parts for the Artura. Because both sit at the lower tail, Bulletproof Automotive confirms fitment details with RYFT before ordering the Rear Bumper Valance for McLaren Artura alongside the diffuser, so the two are checked together.

What is a rear bumper valance?

A valance is the lower panel of a bumper, the band of bodywork below the main bumper surface. On the Artura it sits under the high-mounted exhaust exits and the tail lamps, and a carbon version changes the look of the lower rear without touching the upper body.

Is the valance listed for the Artura Spider?

No. RYFT names only the McLaren Artura. Launch coverage focuses the changes on the Spider at the roof, buttresses and rear deck, but RYFT has not listed the open car for this part, so Spider owners should wait for confirmation.

How should a carbon valance be cleaned?

The lower tail picks up road spray and grime from the rear tires. Rinse it thoroughly, wash with a pH neutral shampoo and a soft brush, and avoid strong wheel cleaners on the clear finish. A ceramic coating makes the next wash quicker.

Should a specialist fit the valance?

Yes. Work at the lower rear of the Artura means removing and refitting parts near the exhaust and the rear clamshell, both of which are costly to damage. A shop used to McLaren bodywork will protect the paint and check the gaps along the full width.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

RYFT Carbon Fiber Rear Bumper Valance for McLaren Artura

RYFT’s carbon fiber rear bumper valance for McLaren Artura cars is made for the lower section of the rear bumper, part of the tail that RYFT reshapes with extended curved surfaces. McLaren built the back of the Artura as a clamshell with very few panel joints, so a carbon valance changes the view from behind more than its size suggests. We would pair it with the RYFT rear diffuser so the whole lower rear reads in one weave.

Design

The Artura’s exhaust exits sit high in the tail, and for 2025 McLaren revised the system with a tuned resonator and upward-angled conical tailpipes, which leaves the lower bumper free for aero and styling parts. RYFT’s Artura brief extends curved surfaces at the rear as well as the front, and the valance is where that extension shows when the car is seen from behind. It comes in 2×2 twill carbon like the rest of RYFT’s Artura parts.

Features

2×2 twill carbon fiber rear bumper valance
Extended curved surfaces at the rear
Frames the lower tail below the high-mounted exhaust exits
Pairs with the RYFT Artura rear diffuser

Applications

McLaren Artura: MCLA | 2023-present | 3.0L M630 twin-turbo V6 plug-in hybrid

Notes

RYFT does not state whether the valance replaces the factory lower bumper section or fits over it
RYFT lists this rear bumper valance for McLaren Artura cars and does not name the Artura Spider
Next to it sits the RYFT Carbon Fiber Rear Diffuser for McLaren Artura
View the RYFT Artura parts

Frequently Asked Questions

Can the Rear Bumper Valance for McLaren Artura be fitted with the RYFT rear diffuser? RYFT sells the valance and the rear diffuser as separate parts for the Artura. Because both sit at the lower tail, Bulletproof Automotive confirms fitment details with RYFT before ordering the Rear Bumper Valance for McLaren Artura alongside the diffuser, so the two are checked together.
What is a rear bumper valance? A valance is the lower panel of a bumper, the band of bodywork below the main bumper surface. On the Artura it sits under the high-mounted exhaust exits and the tail lamps, and a carbon version changes the look of the lower rear without touching the upper body.
Is the valance listed for the Artura Spider? No. RYFT names only the McLaren Artura. Launch coverage focuses the changes on the Spider at the roof, buttresses and rear deck, but RYFT has not listed the open car for this part, so Spider owners should wait for confirmation.
How should a carbon valance be cleaned? The lower tail picks up road spray and grime from the rear tires. Rinse it thoroughly, wash with a pH neutral shampoo and a soft brush, and avoid strong wheel cleaners on the clear finish. A ceramic coating makes the next wash quicker.
Should a specialist fit the valance? Yes. Work at the lower rear of the Artura means removing and refitting parts near the exhaust and the rear clamshell, both of which are costly to damage. A shop used to McLaren bodywork will protect the paint and check the gaps along the full width.

About RYFT

RYFT is an American performance house building titanium exhausts, carbon fiber exterior parts and spring kits for Ferrari, Lamborghini, McLaren, Porsche, Audi and Chevrolet performance vehicles. Its titanium exhausts are made by hand around RYFT’s proprietary velocity loops, its carbon fiber exterior parts are made in exposed weave for specific models, and its spring kits are developed with Moton Suspension. The HYPR Titanium system for the Lamborghini Revuelto is designed, tested and manufactured in the USA with 3D-printed titanium collectors and tips.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

RYFT Carbon Fiber Rear Bumper Valance for McLaren Artura [29-20-1036]

Guaranteed Safe Checkout

RYFT Carbon Fiber Rear Bumper Valance for McLaren Artura

Design

Features

Applications

Notes

Frequently Asked Questions

About RYFT

Reviews