Will it fit a standard-width S2000?

No. The manufacturer developed this wing exclusively for wide-body S2000s such as cars with the Type-GT body kit, and the 1800mm span is sized for that wider bodywork. Owners of standard-width cars should look at the 1390mm or 1600mm Type 1 wings instead.

Why choose the Swan-Neck 3D GT-Wing for AP1 cars over a pedestal wing?

Because the Swan-Neck 3D GT-Wing for AP1 cars is held from above, the stays do not disturb airflow under the wing, where most downforce is made. The manufacturer says this increases downforce and reduces drag, the reason top-mount stays are common in Super GT and FIA GT3.

What comes in the box?

The wing itself, the dedicated swan neck stays and a dedicated trunk base for the center mount. Paint or UV protective clear is not included, and the wide-body kit the wing is designed around is a separate purchase. Fitting the trunk base is a job for an experienced installer.

How large is the wing?

The wing spans 1800mm with a 378mm chord, and the stays stand 370mm tall. It is a large, wide single-element design whose 3D shape and wing area are meant to catch as much airflow as possible for cornering speed on a time attack car.

How does it differ from the Phantom swan neck wing?

Both span 1800mm on swan neck stays for wide-body cars. This version is wet carbon with a 378mm chord and 370mm stays, while the Phantom wing uses dry carbon with a 330mm chord, 400mm stays and up to 10 steps of adjustment.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

J’s Racing Swan-Neck 3D GT-Wing for AP1 / AP2 Honda S2000

J’s Racing’s Swan-Neck 3D GT-Wing for AP1 and AP2 S2000s was developed for wide-body cars such as those wearing the Osaka tuner’s Type-GT kit. It hangs a 1800mm wet carbon wing from top-mounted swan neck stays, the layout used in Super GT and FIA GT3, so the underside of the wing is left clean to build more downforce with less drag. The end plates reach well below the wing and carry a serrated trailing edge. This is a time attack part for cars built purely for lap times; on a standard-width S2000 it is the wrong choice.

Features

1800mm span sized for wide-body S2000s
Top-mount swan neck stays that leave the wing underside clear
Large end plates with a serrated trailing edge to trim drag
378mm chord and 370mm stay height with a broad 3D profile
Wet carbon wing on a trunk center mount

What’s Included

1800mm wet carbon wing
Dedicated swan neck stays
Dedicated trunk base

Applications

Honda S2000: AP1 | 1999-2003 | 2.0L F20C
Honda S2000: AP2 | 2004-2009 | 2.2L F22C

Notes

Designed exclusively for wide-body S2000s such as the J’s Racing Type-GT body kit, which is sold separately
A UV-cut clear coat is recommended to prevent sun damage on cars stored outdoors and is not included
Made to order in Japan; Bulletproof Automotive confirms the lead time with J’s Racing USA once ordered

Frequently Asked Questions

Will it fit a standard-width S2000? No. The manufacturer developed this wing exclusively for wide-body S2000s such as cars with the Type-GT body kit, and the 1800mm span is sized for that wider bodywork. Owners of standard-width cars should look at the 1390mm or 1600mm Type 1 wings instead.
Why choose the Swan-Neck 3D GT-Wing for AP1 cars over a pedestal wing? Because the Swan-Neck 3D GT-Wing for AP1 cars is held from above, the stays do not disturb airflow under the wing, where most downforce is made. The manufacturer says this increases downforce and reduces drag, the reason top-mount stays are common in Super GT and FIA GT3.
What comes in the box? The wing itself, the dedicated swan neck stays and a dedicated trunk base for the center mount. Paint or UV protective clear is not included, and the wide-body kit the wing is designed around is a separate purchase. Fitting the trunk base is a job for an experienced installer.
How large is the wing? The wing spans 1800mm with a 378mm chord, and the stays stand 370mm tall. It is a large, wide single-element design whose 3D shape and wing area are meant to catch as much airflow as possible for cornering speed on a time attack car.
How does it differ from the Phantom swan neck wing? Both span 1800mm on swan neck stays for wide-body cars. This version is wet carbon with a 378mm chord and 370mm stays, while the Phantom wing uses dry carbon with a 330mm chord, 400mm stays and up to 10 steps of adjustment.

About J’s Racing

J’s Racing was established in Osaka in 1989, as VTEC engines and lightweight Civics and Integras were changing what a Honda could do, and it has built parts for Hondas ever since. The company develops engine response, suspension, braking, cooling and aerodynamics together as one system, then proves the parts in time attack, gymkhana, endurance and circuit racing. Its Fit lapped Tsukuba Circuit in 1’00.459, and its naturally aspirated AP1 S2000, the Maou car, became the company’s reference build for the Honda roadster. Every J’s Racing part is designed and tested in Japan, and J’s Racing USA in Carson, California handles distribution in the United States.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

J’s Racing Swan-Neck 3D GT-Wing for AP1 / AP2 Honda S2000 [DGW7-S1-SNW]

Guaranteed Safe Checkout

J’s Racing Swan-Neck 3D GT-Wing for AP1 / AP2 Honda S2000

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About J’s Racing

Reviews