Does the Fabspeed Supersport X-Pipe Cat-Back fit every C8 Corvette?

It fits the 2020 and newer C8 Stingray with the 6.2L LT2 V8. The Z06 (5.5L LT6) and ZR1 use their own dedicated systems, so this one is specific to the LT2 cars. It bolts to the factory connection points and hangers, so no cutting or fabrication is needed.

Is the exhaust valveless, and how loud is it?

Yes, it is a valveless design, so it is always on with no quiet mode. The C8 gets a deep, authoritative rumble at idle and cruise that builds into an exotic growl under throttle. It is meant for owners who want the car to be consistently vocal rather than muted around town.

Will it trigger a check-engine light?

It can if the car is driven in its cylinder-deactivation (four-cylinder) mode. Fabspeed recommends keeping the Corvette in a V8 drive mode to avoid a possible check-engine light, and no engine tune is required to run the system otherwise.

What is the Fabspeed Supersport X-Pipe Cat-Back made from, and does it add power?

The Fabspeed Supersport X-Pipe Cat-Back is built from 3-inch stainless steel with an integrated X-pipe and is roughly 38 pounds lighter than stock. Fabspeed reports improved sound and power across the rev range; pairing it with Fabspeed's Sport Cats adds further power and volume.

What tip finishes are available?

The system is offered with a choice of three tip finishes: polished, satin black and carbon fiber. All three use the same stainless X-pipe cat-back underneath, so the choice is purely about the look at the rear of the car.

Is it a bolt-on, and does it keep the factory emissions hardware?

Yes. It is a direct bolt-on cat-back that installs with no cutting or welding, and because it is a cat-back it leaves the factory emissions hardware in place. Most owners can have it fitted by a competent shop in a few hours with hand tools.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Fabspeed Supersport X-Pipe Cat-Back Exhaust System for C8 Chevrolet Corvette

Give the C8 Corvette a voice to match its bite with Fabspeed’s Supersport X-Pipe Cat-Back Exhaust System — a valveless setup tuned for presence and punch. Expect an authoritative rumble at idle and cruise that’s anything but stock, then a hard-hitting, chest-thumping surge when you open the throttle. The X-pipe architecture sharpens flow and gives the LT2 a distinct, exotic growl that transforms every pull and puts a grin on your face. See and hear it in action in the video below.

Features

Improved sound and power throughout RPM band
3.0″ stainless steel tubing
Saves 38lbs compared to factory system
Hand-crafted exhaust system at Fabspeed USA
Includes amorphous silica fiber wrapped stainless heat shielding
Simple DIY bolt-on installation, no cutting or welding required
Your choice of tips
All Fabspeed performance products are backed by the Fabspeed lifetime warranty

Applications

Chevrolet Corvette Stingray: C8 | 2020-present | 6.2L LT2 V8

Notes

This is a non-valvetronic system, Fabspeed recommends placing the car in 8-cylinder mode to eliminate the possibility of a CEL
All Fabspeed products are expected to ship within one to two weeks of order, though timelines are often much quicker

Frequently Asked Questions

Does the Fabspeed Supersport X-Pipe Cat-Back fit every C8 Corvette? It fits the 2020 and newer C8 Stingray with the 6.2L LT2 V8. The Z06 (5.5L LT6) and ZR1 use their own dedicated systems, so this one is specific to the LT2 cars. It bolts to the factory connection points and hangers, so no cutting or fabrication is needed.
Is the exhaust valveless, and how loud is it? Yes, it is a valveless design, so it is always on with no quiet mode. The C8 gets a deep, authoritative rumble at idle and cruise that builds into an exotic growl under throttle. It is meant for owners who want the car to be consistently vocal rather than muted around town.
Will it trigger a check-engine light? It can if the car is driven in its cylinder-deactivation (four-cylinder) mode. Fabspeed recommends keeping the Corvette in a V8 drive mode to avoid a possible check-engine light, and no engine tune is required to run the system otherwise.
What is the Fabspeed Supersport X-Pipe Cat-Back made from, and does it add power? The Fabspeed Supersport X-Pipe Cat-Back is built from 3-inch stainless steel with an integrated X-pipe and is roughly 38 pounds lighter than stock. Fabspeed reports improved sound and power across the rev range; pairing it with Fabspeed’s Sport Cats adds further power and volume.
What tip finishes are available? The system is offered with a choice of three tip finishes: polished, satin black and carbon fiber. All three use the same stainless X-pipe cat-back underneath, so the choice is purely about the look at the rear of the car.
Is it a bolt-on, and does it keep the factory emissions hardware? Yes. It is a direct bolt-on cat-back that installs with no cutting or welding, and because it is a cat-back it leaves the factory emissions hardware in place. Most owners can have it fitted by a competent shop in a few hours with hand tools.

About Fabspeed

Fabspeed Motorsport is situated in Fort Washington, Pennsylvania, within the United States of America. Their extensive 26,000 sqft. facility serves as a hub for various car clubs, including Porsche Club of America, Ferrari, McLaren, Lamborghini, and more. The company is renowned for its comprehensive approach to product development. They handle the entire process, from design and engineering to dyno testing, street trials, and racing assessments, ensuring the quality and performance of every item. Fabspeed also collaborates closely with race engine builders and tuners hailing from Italy, Germany, and the United States, resulting in the creation of the Ultimate Performance parts. To cater to their passionate global audience, Fabspeed meticulously crafts systems using aerospace-grade austenitic stainless steel, titanium, and carbon fiber materials, setting a standard for excellence in the industry.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Fabspeed Supersport X-Pipe Cat-Back Exhaust System for C8 Chevrolet Corvette [FS.CHEVY.C8.CBEX]

Guaranteed Safe Checkout

Fabspeed Supersport X-Pipe Cat-Back Exhaust System for C8 Chevrolet Corvette

Features

Applications

Notes

Frequently Asked Questions

About Fabspeed

Reviews