Will the Fabspeed Sport Performance Package fit my Porsche 911 Carrera 3.0?

Yes. The Fabspeed Sport Performance Package is built for 1976-1983 Porsche 911 Carrera 3.0L cars, the SC generation. Every component is a direct replacement for the corresponding factory part, with no cutting or welding required. Owners of 1984-1989 3.2L cars need the 3.2 version of the package, which is a separate part number and includes a DME chip option.

Do I need a chip or a tune with this package?

No. The 3.0 SC uses CIS mechanical fuel injection, which compensates automatically for a freer intake and exhaust, so the fuelling sorts itself out without any engine management work. This is a real difference from the 3.2 package, where the DME chip is what unlocks the full gain. On a 3.0, the hardware is the whole job.

How much power does it add?

Fabspeed quotes 19 horsepower and 17 ft-lbs of torque for the complete package, along with 21 pounds of weight saved. The gain comes from opening both ends of the engine at once, the intake through the CUP airbox cover and BMC filter and the exhaust through the Maxflo system and your chosen mid-section.

Should I choose Sport Cats or the European pre-muffler pipe?

Choose Sport Cats for any car driven on the road. They keep a 200-cell metallic catalyst in the system while flowing far better than the factory unit. Fabspeed lists the European pre-muffler pipe configuration for closed-course and off-road use only, so it suits a dedicated track car and nothing else.

What comes in the package?

The Maxflo performance exhaust system, your choice of 200-cell Sport Cats or the European pre-muffler pipe, the CUP high performance airbox cover, and the BMC F1 performance air filter. There is no chip in this package, because the 3.0 does not need one. Each major component is also sold separately if you prefer to build the car up over time.

Should I choose single or dual outlet?

Dual gives the wider, more symmetrical look at the rear valance. Single is the more discreet choice and ships with a block-off fitted to the passenger side outlet, because Fabspeed builds one exhaust system that covers both configurations. The sound difference between them is small, so treat it mainly as an appearance decision.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Fabspeed Sport Performance Package for Porsche 911 Carrera

The Fabspeed Sport Performance Package for Porsche 911 Carrera 3.0 is built around a fact about the SC that makes it an unusually good candidate for this kind of work: its CIS fuel injection compensates on its own for a freer-breathing intake and exhaust, so the car takes the hardware and sorts the fuelling out itself. Fabspeed designs, engineers, dyno tests and race proves its own work from its Fort Washington, Pennsylvania facility, and this is the combination they settled on for the 3.0: a Maxflo exhaust in T304L stainless, a CUP airbox cover and BMC F1 filter at the other end, and your choice of 200-cell Sport Cats or the European pre-muffler pipe in between. Nineteen horsepower and seventeen ft-lbs come with it, along with 21 pounds off the car and throttle response that sharpens across the range. No chip, no tune, no mapping appointment.

Features

Improved throttle response and power through the whole rev range
The SC’s CIS fuel injection self-adjusts for the intake and exhaust upgrades, so no chip or tune is required
Sport Cats or European pre-muffler pipe, chosen at checkout
Single or dual outlet in one system, with a block-off included for the passenger side outlet in single-outlet use
CUP high performance airbox cover is a direct replacement for the front cover of the factory airbox and improves airflow into the engine
BMC F1 performance air filter is a drop-in replacement for the factory air filter
Direct replacement for the restrictive factory sections
Backed by the Fabspeed lifetime warranty

Specifications

Power gain: +19 hp and +17 ft-lbs
Weight savings: 21 lbs / 9.5 kg
Material: T304L stainless steel
Tubing: 14-16 gauge, CNC mandrel bent
Sport Cats: metallic spun core, 200 cell
Outlet: single or dual

What’s Included

Maxflo performance exhaust system
200 cell Sport Cats or European pre-muffler pipe (as selected)
CUP high performance airbox cover
BMC F1 performance air filter

Applications

Porsche 911 Carrera: 1976-1983 | 3.0L H6

Notes

The European pre-muffler pipe configuration is intended for closed-course and off-road use only and is not for use on public roads. Choose the Sport Cats configuration for any road-driven car.
No engine management work is required on the 3.0; the SC’s CIS injection compensates for the intake and exhaust upgrades on its own
Single-outlet configurations ship with a block-off for the passenger side outlet; it is one system rather than two different exhausts
Every major component is sold separately if you would rather build in stages: the Maxflo exhaust, the Sport Cat (FS.POR.911.SC) and the European pre-muffler pipe (FS.POR.911.CB)
For 3.2L cars the equivalent bundle is the Fabspeed Sport Performance Package for Porsche 911 Carrera 3.2, which adds an optional DME upgrade chip
Owners who want headers as well should look at the Fabspeed RSR Header Muffler Kit, which replaces the system from the heads back rather than adding to this package
All Fabspeed products are expected to ship within one week of order, though timelines are often much quicker

Frequently Asked Questions

Will the Fabspeed Sport Performance Package fit my Porsche 911 Carrera 3.0? Yes. The Fabspeed Sport Performance Package is built for 1976-1983 Porsche 911 Carrera 3.0L cars, the SC generation. Every component is a direct replacement for the corresponding factory part, with no cutting or welding required. Owners of 1984-1989 3.2L cars need the 3.2 version of the package, which is a separate part number and includes a DME chip option.
Do I need a chip or a tune with this package? No. The 3.0 SC uses CIS mechanical fuel injection, which compensates automatically for a freer intake and exhaust, so the fuelling sorts itself out without any engine management work. This is a real difference from the 3.2 package, where the DME chip is what unlocks the full gain. On a 3.0, the hardware is the whole job.
How much power does it add? Fabspeed quotes 19 horsepower and 17 ft-lbs of torque for the complete package, along with 21 pounds of weight saved. The gain comes from opening both ends of the engine at once, the intake through the CUP airbox cover and BMC filter and the exhaust through the Maxflo system and your chosen mid-section.
Should I choose Sport Cats or the European pre-muffler pipe? Choose Sport Cats for any car driven on the road. They keep a 200-cell metallic catalyst in the system while flowing far better than the factory unit. Fabspeed lists the European pre-muffler pipe configuration for closed-course and off-road use only, so it suits a dedicated track car and nothing else.
What comes in the package? The Maxflo performance exhaust system, your choice of 200-cell Sport Cats or the European pre-muffler pipe, the CUP high performance airbox cover, and the BMC F1 performance air filter. There is no chip in this package, because the 3.0 does not need one. Each major component is also sold separately if you prefer to build the car up over time.
Should I choose single or dual outlet? Dual gives the wider, more symmetrical look at the rear valance. Single is the more discreet choice and ships with a block-off fitted to the passenger side outlet, because Fabspeed builds one exhaust system that covers both configurations. The sound difference between them is small, so treat it mainly as an appearance decision.

About Fabspeed

Fabspeed Motorsport works out of a 26,000 square foot facility in Fort Washington, Pennsylvania, where design, engineering, dyno testing, street testing and race development all happen under one roof. The shop is a fixture for the Porsche Club of America, Ferrari, McLaren and Lamborghini crowds, and collaborates with race engine builders and tuners in Italy, Germany and the United States. Systems are fabricated from aerospace-grade austenitic stainless steel, titanium and carbon fiber, and every Fabspeed performance product is backed by the Fabspeed lifetime warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Fabspeed Sport Performance Package for Porsche 911 Carrera [FS.POR.911.SXXKG30X]

RANK MATH META DESCRIPTION

Guaranteed Safe Checkout

Fabspeed Sport Performance Package for Porsche 911 Carrera

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Fabspeed

Reviews