Does the Eventuri RS3 engine cover fit my car?

The Eventuri RS3 engine cover fits the 8Y Audi RS3, the facelift 8V Audi RS3, and the facelift 8S Audi TT RS. The 8V and 8S fitment is facelift-specific, so confirm your car is a facelift model before ordering. It uses OEM mounting points and is not designed for pre-facelift 8V or 8S cars.

Is this an intake system?

No. This listing is for the engine cover only. It is a cosmetic composite panel that replaces the factory plastic cover and does not change airflow, add power, or function as an intake. If you want airflow gains, pair it with a separate Eventuri intake system for the RS3 or TT RS.

Does it add horsepower?

No. The Eventuri RS3 engine cover is an appearance upgrade for the inline-5 engine bay and does not increase power. It swaps the stock plastic cover for lightweight carbon fiber and red Kevlar, so the benefit is visual and weight-related rather than any performance gain.

What materials is it made from?

The cover uses pre-preg carbon fiber outer sections with a red Kevlar center panel, sealed under a high-gloss UV-resistant clear coat. The composite is lightweight and heat-resistant, using the same material quality Eventuri applies to their intake systems, so it holds up to underhood temperatures.

Is installation difficult or permanent?

No. The Eventuri RS3 engine cover installs on the factory OEM mounting locations for a precise, straightforward fit with no permanent modifications. It replaces the stock cover directly, so the change is fully reversible if you ever want to refit the original panel.

Will the clear coat fade in the sun?

The cover is finished with a high-gloss UV-resistant clear coat specifically to resist fading and preserve the deep carbon and red Kevlar contrast over time. As with any exposed carbon part, keeping it clean and out of prolonged harsh sun helps maintain the finish.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri Gloss Carbon and Red Kevlar Engine Cover for 8Y / 8V Audi RS3 and 8S TT RS

The Eventuri RS3 engine cover is a direct replacement for the factory plastic cover on the 8Y and 8V Audi RS3 and 8S TT RS, built to transform the visual centerpiece of Audi’s iconic inline-5 engine bay. Pre-preg carbon fiber outer sections wrap a red Kevlar center panel for a true motorsport look, while OEM mounting points keep installation precise and straightforward with no permanent modifications. Because the inline-5 is so often on display at shows and during servicing, the cover carries a lot of the bay’s presentation, and Eventuri’s lightweight, heat-resistant composite brings the same material quality found in their intake systems. The gloss carbon outer sections give a deep, high-clarity finish and the red Kevlar center adds a striking contrast that suits the RS3 and TT RS character.

Features

Direct replacement for the factory plastic engine cover
Pre-preg carbon fiber outer sections with a red Kevlar center panel
High-gloss UV-resistant clear coat for a deep, high-clarity finish
Lightweight, heat-resistant composite construction
Uses OEM mounting locations for simple installation with no permanent modifications
Motorsport-inspired OEM+ upgrade for the Audi inline-5 engine bay
Material quality carried over from Eventuri’s intake systems

Specifications

Material: Pre-preg carbon fiber outer sections, red Kevlar center section
Finish: High-gloss UV-resistant clear coat
Fitment type: Direct replacement on OEM mounting points, no permanent modifications

Applications

Audi RS3: 8Y
Audi RS3: 8V (facelift)
Audi TT RS: 8S (facelift)

Notes

This is an engine cover only; it is not an intake system and does not add power.
Intended for facelift vehicles. The 8V RS3 and 8S TT RS fitment is facelift-specific; confirm your car is a facelift model before ordering.
Designed and hand-assembled in the UK.
Warranty coverage and damage-in-transit support are fully provided.

Frequently Asked Questions

Does the Eventuri RS3 engine cover fit my car? The Eventuri RS3 engine cover fits the 8Y Audi RS3, the facelift 8V Audi RS3, and the facelift 8S Audi TT RS. The 8V and 8S fitment is facelift-specific, so confirm your car is a facelift model before ordering. It uses OEM mounting points and is not designed for pre-facelift 8V or 8S cars.
Is this an intake system? No. This listing is for the engine cover only. It is a cosmetic composite panel that replaces the factory plastic cover and does not change airflow, add power, or function as an intake. If you want airflow gains, pair it with a separate Eventuri intake system for the RS3 or TT RS.
What materials is it made from? The cover uses pre-preg carbon fiber outer sections with a red Kevlar center panel, sealed under a high-gloss UV-resistant clear coat. The composite is lightweight and heat-resistant, using the same material quality Eventuri applies to their intake systems, so it holds up to underhood temperatures.
Is installation difficult or permanent? No. The Eventuri RS3 engine cover installs on the factory OEM mounting locations for a precise, straightforward fit with no permanent modifications. It replaces the stock cover directly, so the change is fully reversible if you ever want to refit the original panel.
Will the clear coat fade in the sun? The cover is finished with a high-gloss UV-resistant clear coat specifically to resist fading and preserve the deep carbon and red Kevlar contrast over time. As with any exposed carbon part, keeping it clean and out of prolonged harsh sun helps maintain the finish.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with backgrounds in aeronautics and tuning, all sharing a passion for cars and performance. After owning various aftermarket intakes over the years and being disappointed with gains that seldom lived up to their claims, they decided to take things into their own hands and set a new benchmark in intake design and technology. The goal was to engineer systems that provide real, measurable gains and to publish genuine figures to back them up. Their systems are developed using cutting-edge design, testing, and prototyping methods. Each design undergoes CFD analysis and is validated at the prototype stage through volumetric airflow measurement, intake temperature testing, and extensive dynamometer testing. Eventuri publishes all development data to illustrate the full process from concept to finished product. Only the best materials are selected for every component, down to the choice of fasteners, to ensure the quality of the final product is second to none.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Eventuri Gloss Carbon and Red Kevlar Engine Cover for 8Y / 8V Audi RS3 and 8S TT RS [EVE-ST38V8S-CF-ENG]

Guaranteed Safe Checkout

Eventuri Gloss Carbon and Red Kevlar Engine Cover for 8Y / 8V Audi RS3 and 8S TT RS

Features

Specifications

Applications

Notes

Frequently Asked Questions

About Eventuri

Reviews