Is the Black FMIC and Intake package emissions legal?

Yes. The Black FMIC and Intake package is covered by California Air Resources Board Executive Orders D-660-217 and D-660-245. That makes the Accessport V3, the intake system and the intercooler legal for sale and use on emissions controlled vehicles in every state, California included, as long as everything is installed following the COBB application guide.

What does the intake add over the No Intake package?

The intake swaps the factory piping for dual 3 inch mandrel bent aluminum tubes and pairs a sealed, fiber reinforced airbox lid with a tapered-oval filter that has 165 percent more surface area than stock. COBB reports more airflow and a louder turbo sound while boost builds at low RPM.

Does the 2020 F-150 need any cutting for this package?

Only a little. The front mount intercooler calls for minor trimming on the back side of the grille, and COBB describes the rest of the job as straightforward. The intake takes the place of the factory tubing. Owners who want no trimming at all can choose the package built around the factory location intercooler instead.

Which trucks does this package fit?

COBB confirms it for the USDM 2020 Ford F-150 with the 3.5L EcoBoost. The included AP3-FOR-007 Accessport is built for that model year and engine, and COBB lists separate packages for the 2.7L EcoBoost, for the Raptor and Limited and for other model years. Check the year and engine on your truck before ordering.

Does the Accessport V3 work as a gauge after flashing?

Yes. Once the map is loaded, the Accessport V3 mounts in the cabin and displays up to six parameters in real time on a full color, higher resolution screen. Gauge clusters can be set up for street, race or dyno use, bezel colors can be changed, and the device keeps every saved map and datalog in its storage.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

COBB Tuning 3.5L Stage 2 Power Package with Black FMIC and Intake for P552 Ford F-150 (2020)

COBB Tuning’s Black FMIC and Intake package is the full Stage 2 hardware set for a 2020 F-150 3.5L EcoBoost: the AP3-FOR-007 Accessport V3, the 7F2125 intake system and the 7F2500-BK front mount intercooler with a 24 x 14 x 3.5 inch core. Every component is 50-state legal under CARB EO D-660-217 and D-660-245. It changes more than any other 2020 package and needs minor grille trimming; owners who want no trimming should choose the factory location package.

Intake System

In the Black FMIC and Intake package, COBB replaces the factory airbox piping with dual 3 inch mandrel bent aluminum tubes and custom silicone couplers. A fiber reinforced airbox lid with a closed-cell foam gasket shields a dual inlet, tapered-oval filter with 165 percent more surface area than stock, and COBB reports more airflow and a more audible turbo sound as boost builds at low RPM.

Features

Dual 3 in mandrel bent aluminum intake tubing with silicone couplers
Dual inlet tapered-oval filter with 165% more surface area than stock
Black front mount intercooler with a 24 x 14 x 3.5 in core
Accessport V3 with customizable street, race and dyno gauge layouts
Compatible with COBB Accessport Off The Shelf maps

What’s Included

Accessport V3 (AP3-FOR-007)
Intake System (7F2125)
Front Mount Intercooler, Black (7F2500-BK)
COBB Vehicle Badge (800200)

Applications

Ford F-150: P552 | 2020 | 3.5L EcoBoost | USDM

Notes

50-state legal with CARB EO D-660-217 and D-660-245 when installed per the COBB application guide
Minor trimming on the back side of the grille is required for the intercooler
Listed for the USDM 2020 F-150 with the 3.5L EcoBoost only
Installing the Accessport over anything other than OEM or COBB software may result in ECU or TCU failure

Frequently Asked Questions

Is the Black FMIC and Intake package emissions legal? Yes. The Black FMIC and Intake package is covered by California Air Resources Board Executive Orders D-660-217 and D-660-245. That makes the Accessport V3, the intake system and the intercooler legal for sale and use on emissions controlled vehicles in every state, California included, as long as everything is installed following the COBB application guide.
What does the intake add over the No Intake package? The intake swaps the factory piping for dual 3 inch mandrel bent aluminum tubes and pairs a sealed, fiber reinforced airbox lid with a tapered-oval filter that has 165 percent more surface area than stock. COBB reports more airflow and a louder turbo sound while boost builds at low RPM.
Does the 2020 F-150 need any cutting for this package? Only a little. The front mount intercooler calls for minor trimming on the back side of the grille, and COBB describes the rest of the job as straightforward. The intake takes the place of the factory tubing. Owners who want no trimming at all can choose the package built around the factory location intercooler instead.
Which trucks does this package fit? COBB confirms it for the USDM 2020 Ford F-150 with the 3.5L EcoBoost. The included AP3-FOR-007 Accessport is built for that model year and engine, and COBB lists separate packages for the 2.7L EcoBoost, for the Raptor and Limited and for other model years. Check the year and engine on your truck before ordering.
Does the Accessport V3 work as a gauge after flashing? Yes. Once the map is loaded, the Accessport V3 mounts in the cabin and displays up to six parameters in real time on a full color, higher resolution screen. Gauge clusters can be set up for street, race or dyno use, bezel colors can be changed, and the device keeps every saved map and datalog in its storage.

About COBB Tuning

COBB Tuning was founded by Trey Cobb in 1999 in Rockwall, Texas, as a Subaru performance shop in the back of his father’s tire shop, and is now headquartered in Austin, Texas. In 2004 COBB introduced the Accessport, a handheld ECU tuning device that flashes COBB’s off-the-shelf maps or a custom tune and doubles as a real-time gauge and datalogger. The range has since grown from Subaru to Ford, Volkswagen, Audi, Porsche, Nissan, Honda, Mazda, Mitsubishi and Toyota platforms, with intakes, intercoolers, exhausts and flex fuel kits engineered alongside the tuning, and many COBB parts carry California Air Resources Board Executive Order numbers for use in all 50 states.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

COBB Tuning 3.5L Stage 2 Power Package with Black FMIC and Intake for P552 Ford F-150 (2020) [FOR0070020BK]

Guaranteed Safe Checkout

COBB Tuning 3.5L Stage 2 Power Package with Black FMIC and Intake for P552 Ford F-150 (2020)

Intake System

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About COBB Tuning

Reviews