Is the BRIDE ZETA IV VERIA FIA approved?

Yes. The ZETA IV VERIA is FIA approved to the FIA 8855-1999 standard and is suitable for use in international races and competitions. FIA homologations carry expiration dates, so verifying the seat's current approval status against the FIA's active homologation list before use in sanctioned events is recommended.

What is the difference between the ZETA IV VERIA and the ZETA IV VERIO?

The VERIA and VERIO are both FIA-approved ZETA IV variants tuned for slim and smaller drivers, sharing identical dimensional tuning; 30mm narrower side support, 15mm high-density seat base urethane, and up to 30mm adjustable height via a removable cushion. The distinction is visual; the VERIA features a pink BRIDE logo and pink headrest stitching against an all-black seat, while the VERIO uses the standard color accent approach. Drivers choosing between the two are selecting a visual preference rather than a performance or fitment difference.

Who is the ZETA IV VERIA designed for?

The ZETA IV VERIA is designed for slim and smaller drivers under 5.25ft. The side support from the waist to the thighs is approximately 30mm narrower than the standard ZETA IV, allowing smaller-framed drivers to experience the full lateral hold the seat is engineered to deliver. Drivers who fit comfortably within the standard ZETA IV dimensions should consider the standard ZETA IV, REIMS, or GHOST variants rather than the VERIA.

How does the removable urethane cushion work?

The ZETA IV VERIA includes a built-in removable urethane cushion in the seat base that raises the seating height by up to 30mm when installed. This allows smaller drivers to adjust their eye point and pedal reach to a comfortable and controlled driving position without modifying the vehicle or mounting rails. The cushion can be removed when the additional height is not required.

What is the submarine effect and how does the VERIA address it?

The submarine effect occurs when an occupant slides forward under the lap belt during hard braking or a frontal collision, causing the belt to ride up over the abdomen instead of restraining across the pelvis. The ZETA IV VERIA addresses this through its raised thigh design, which keeps the thighs supported and the pelvis correctly positioned under restraint load, reducing the risk of the occupant sliding forward.

What seat rails are compatible with the ZETA IV VERIA?

The ZETA IV VERIA is compatible with FB, FG, FK, FO, FT, FX, IG, and LF type seat rails. All compatible rails are sold separately and vehicle-specific rails are required for installation. Confirm the correct rail type for your specific vehicle before purchasing.

What makes the ZETA IV VERIA different from the standard ZETA IV?

The VERIA differs from the standard ZETA IV in three ways. First, the side support from the waist to the thighs is approximately 30mm narrower to accommodate smaller frames. Second, the seat base includes 15mm of high-density urethane and a removable cushion for up to 30mm of height adjustment. Third, it carries FIA 8855-1999 approval, which the ZETA IV REIMS and ZETA GHOST do not. The underlying shell construction, LOWMAX System, raised thigh geometry, and rail compatibility are shared across the ZETA IV range.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BRIDE ZETA IV VERIA Bucket Seat in Black

The BRIDE ZETA IV VERIA is a purpose-tuned FIA-approved full bucket seat designed for slim and smaller drivers, built on the same ZETA IV platform that has made the ZETA series BRIDE’s top-selling full bucket seat since 1990. Sharing the same engineering approach as the ZETA IV VERIO, the VERIA is distinguished by its pink BRIDE logo and pink headrest stitching accents on an otherwise all-black seat, giving it a distinct visual identity within the small-driver ZETA IV range. Both the VERIA and VERIO are FIA approved to the FIA 8855-1999 standard and share the same dimensional tuning for drivers under 5.25ft.

The ZETA Series

Advanced Material & Manufacturing Method: BRIDE has improved shell rigidity by 15% by incorporating advanced materials such as glass fiber and aramid fiber into the FRP shells. The seat and thigh cushions, which come into direct contact with the body, now feature molded urethane for enhanced comfort and durability during long drives.
Shell Design & Hold Performance with Safety in Mind: The newly designed shell and vertical slits in the back cushion enhance fitment from the headrest through the back and shoulders, supporting drivers in maintaining an ideal driving position over extended periods. The elevated thigh design also reduces the risk of the submarine effect (where the occupant slides forward) during hard braking or collisions.
LOWMAX System in the ZETA Series: The ZETA series incorporates the LOWMAX system, which narrows shoulder width to 560mm. Originally reserved for select full bucket and reclining seats, the LOWMAX system in ZETA optimizes seat center alignment with the steering wheel center, increasing compatibility across a broader range of vehicle models.

The ZETA IV VERIA

Racing model optimized for smaller drivers: The ZETA IV VERIA is specifically tuned for slim and small drivers, derived from BRIDE’s standard ZETA IV full bucket seat model. Designed to comfortably fit drivers under 5.25 feet, this model adapts to a variety of settings, from street use to intense sports driving. The side supports from the waist to the thighs are approximately 30mm narrower than the standard model, allowing even smaller drivers to experience the full holding performance of a bucket seat. It incorporates about 15mm of high-density urethane on the seat base, with an additional removable urethane cushion, allowing seat height adjustment up to 30mm. The shell is made of FRP silver, with a black seat color, while the BRIDE logo and headrest stitching are presented in a distinctive pink.
- Exclusive Tuning Specification: ZETA IV VERIA is a full bucket seat tailored for slim and small drivers, with urethane thickness adjustments on the side support and seat for a snugger fit than the standard model. This provides thin and small drivers, who may struggle with traditional bucket seats, the security needed for intense sports driving.
- FIA-Approved Model: The ZETA IV VERIA meets standards as specified by the FIA (Federation Internationale de l’Automobile / FIA8855-1999). This model’s rigorous design, quality, and safety level withstand demanding testing, making it suitable for international-level races and competitions.

Features

Provides a higher-grade texture with full coverage in high-quality suede-like fabric that feels good against the skin
A confident product that combines comfort and a hugging hold
Flame-retardant fabric (high-quality suede-like fabric, PVC leather)
Made in Japan
Safety standard compliant model
FIA approved model

Specifications

Series: ZETA
Base Model: ZETA IV
Colors: Black
Shell: FRP silver shell
Width: 460mm (560mm at shoulder pads)
Height: 890mm
Depth: 710mm
Weight: Approximately 7.5kg (16.5lbs)

Compatible Seat Rails

Notes

Vehicle-specific seat rails (sold separately) are required for installation

Frequently Asked Questions

Is the BRIDE ZETA IV VERIA FIA approved? Yes. The ZETA IV VERIA is FIA approved to the FIA 8855-1999 standard and is suitable for use in international races and competitions. FIA homologations carry expiration dates, so verifying the seat’s current approval status against the FIA’s active homologation list before use in sanctioned events is recommended.
What is the difference between the ZETA IV VERIA and the ZETA IV VERIO? The VERIA and VERIO are both FIA-approved ZETA IV variants tuned for slim and smaller drivers, sharing identical dimensional tuning; 30mm narrower side support, 15mm high-density seat base urethane, and up to 30mm adjustable height via a removable cushion. The distinction is visual; the VERIA features a pink BRIDE logo and pink headrest stitching against an all-black seat, while the VERIO uses the standard color accent approach. Drivers choosing between the two are selecting a visual preference rather than a performance or fitment difference.
Who is the ZETA IV VERIA designed for? The ZETA IV VERIA is designed for slim and smaller drivers under 5.25ft. The side support from the waist to the thighs is approximately 30mm narrower than the standard ZETA IV, allowing smaller-framed drivers to experience the full lateral hold the seat is engineered to deliver. Drivers who fit comfortably within the standard ZETA IV dimensions should consider the standard ZETA IV, REIMS, or GHOST variants rather than the VERIA.
How does the removable urethane cushion work? The ZETA IV VERIA includes a built-in removable urethane cushion in the seat base that raises the seating height by up to 30mm when installed. This allows smaller drivers to adjust their eye point and pedal reach to a comfortable and controlled driving position without modifying the vehicle or mounting rails. The cushion can be removed when the additional height is not required.
What is the submarine effect and how does the VERIA address it? The submarine effect occurs when an occupant slides forward under the lap belt during hard braking or a frontal collision, causing the belt to ride up over the abdomen instead of restraining across the pelvis. The ZETA IV VERIA addresses this through its raised thigh design, which keeps the thighs supported and the pelvis correctly positioned under restraint load, reducing the risk of the occupant sliding forward.
What seat rails are compatible with the ZETA IV VERIA? The ZETA IV VERIA is compatible with FB, FG, FK, FO, FT, FX, IG, and LF type seat rails. All compatible rails are sold separately and vehicle-specific rails are required for installation. Confirm the correct rail type for your specific vehicle before purchasing.
What makes the ZETA IV VERIA different from the standard ZETA IV? The VERIA differs from the standard ZETA IV in three ways. First, the side support from the waist to the thighs is approximately 30mm narrower to accommodate smaller frames. Second, the seat base includes 15mm of high-density urethane and a removable cushion for up to 30mm of height adjustment. Third, it carries FIA 8855-1999 approval, which the ZETA IV REIMS and ZETA GHOST do not. The underlying shell construction, LOWMAX System, raised thigh geometry, and rail compatibility are shared across the ZETA IV range.

About BRIDE

BRIDE is a Japan-based manufacturer specializing in seats and rail components designed to sit closest to the driver, offering maximum protection in a collision. Their ASEA-accredited products meet full vehicle inspection standards and pass six rigorous safety tests covering seat back impact, head restraint performance, seat and belt mounting, and flame resistance. BRIDE is also the first Japanese company to receive FIA endorsement for its seats, with nine models approved for international competition. Every seat is built by hand in Japan using precision-engineered shells and technical fabrics, with all components sourced domestically to keep quality tightly controlled from start to finish. For BRIDE, “Made in Japan” reflects a long-held standard built on ingenuity, meticulous craftsmanship, and technical knowledge; qualities that make their seats a trusted choice in the demanding environment of motorsport.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BRIDE ZETA IV VERIA Bucket Seat in Black [HA1VSF]

Guaranteed Safe Checkout

BRIDE ZETA IV VERIA Bucket Seat in Black

The ZETA Series

The ZETA IV VERIA

Features

Specifications

Compatible Seat Rails

Notes

Frequently Asked Questions

About BRIDE

Reviews