What vehicle is the BRIDE Super Seat Rail FT Type designed for?

The FT Type is developed exclusively for the Nissan GT-R R35. It is a vehicle-specific low-position seat rail engineered to the floor and mounting geometry of the R35 chassis and is not a universal rail compatible with other vehicles.

What seats is the FT Type compatible with?

The FT Type is compatible with the BRIDE fixed bucket seat series and edirb models 031, 042, and 061, with the ZETA III Type-XL, ZODIA, and edirb 067 all excluded. Third-party compatibility includes the RECARO SP-G, SPARCO PRO DRIVE, AAR Racing, COBRA, and any other seat whose mounting dimensions fall within 290mm length x 395mm breadth.

Why is edirb 067 excluded from the FT Type when it is compatible with other performance rails?

The FT Type excludes edirb 067 in addition to the ZETA III Type-XL and ZODIA, whereas the FG, FK, FB, and IG Types support edirb 067. The vehicle-specific nature of the FT Type and the R35 chassis geometry appear to account for this difference. Buyers fitting an edirb 067 seat in a GT-R R35 should contact Bulletproof Automotive to confirm the correct rail before purchasing.

How much does the FT Type lower the seat position in the GT-R R35?

The FT Type delivers a super low seating position of up to 50mm. Because it is developed specifically for the R35 rather than as a multi-fitment rail, it does not carry the vehicle-dependent caveat found on the FG, FK, FB, and IG Types stating that the seat position may not be lower depending on the vehicle.

How does the FT Type compare to other BRIDE 50mm super low performance rails?

The FT Type is the only vehicle-specific rail in the BRIDE 50mm performance lineup. The FG, IG, FK, and FB Types are all multi-fitment rails designed for broad vehicle compatibility within their stated dimensions. The FT Type is engineered exclusively for the R35 and is not interchangeable with those rails in other vehicles, nor are those rails a direct substitute for the FT Type in the GT-R R35.

What are the mounting dimensions of the FT Type rail?

The FT Type has mounting dimensions of 290mm length with a ±5mm tolerance and 395mm breadth, consistent with the other performance rails in the BRIDE lineup. Seats from other manufacturers that fall within these dimensions are also listed as compatible.

Is the BRIDE Super Seat Rail FT Type made in Japan?

Yes. The FT Type is manufactured in Japan to BRIDE's quality and fitment standards, consistent with the domestic production approach applied across the BRIDE seat and rail lineup.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BRIDE FT Super Seat Rail

The BRIDE Super Seat Rail FT Type is a Japanese-manufactured performance seat rail priced at JPY 37,400, developed exclusively for the Nissan GT-R R35. Unlike the other rails in the BRIDE performance lineup that are designed for broad vehicle compatibility, the FT Type is a vehicle-specific low-position rail engineered around the unique floor and mounting geometry of the R35 chassis, delivering a super low seating position of up to 50mm without the vehicle-dependent limitations that affect multi-fitment rails. With mounting dimensions of 290mm length (±5mm tolerance) x 395mm breadth, the FT Type is compatible with the BRIDE fixed bucket seat series and edirb models 031, 042, and 061, with the ZETA III Type-XL, ZODIA, and edirb 067 all excluded from compatibility. This is a narrower edirb range than the FG, FK, FB, and IG Types, which support edirb 067 in addition to the models listed here. Third-party compatibility includes the RECARO SP-G, SPARCO PRO DRIVE, AAR Racing, COBRA, and any other seat that falls within the 290mm x 395mm mounting dimensions.

Utilizes Sliders Made By Faurecia Exclusively For BRIDE

BRIDE has selected Faurecia (France), one of the world‘s leading mechanical parts manufacturers, to develop and supply them with the sliders, a critical element of the BRIDE super seat rail
The sliders, which have upper rails measuring 2.0mm in thickness and lower rails measuring 2.3mm in thickness, are equipped with locks on both the left and right sides, providing a secure and sturdy fit without rattling. With a 10 mm pitch and a slide amount of 220 mm, these sliders boast exceptional strength and durability.

ASEA-Approved High Quality & Peace of Mind

The product known as the Super Seat Rail has been granted approval by ASEA, the premier motorsports industry organization in Japan, after satisfying their strict standards. ASEA is a collective of motorsports companies and tuning parts manufacturers and retailers.

Features

Position with a maximum height of 50mm
Manufactured in Japan
The size of the seat when mounted is 290mm (plus or minus 5mm) by 395mm
Only seats in a low position are compatible with the NISSAN GT–R (R35)

Applications

Frequently Asked Questions

What vehicle is the BRIDE Super Seat Rail FT Type designed for? The FT Type is developed exclusively for the Nissan GT-R R35. It is a vehicle-specific low-position seat rail engineered to the floor and mounting geometry of the R35 chassis and is not a universal rail compatible with other vehicles.
What seats is the FT Type compatible with? The FT Type is compatible with the BRIDE fixed bucket seat series and edirb models 031, 042, and 061, with the ZETA III Type-XL, ZODIA, and edirb 067 all excluded. Third-party compatibility includes the RECARO SP-G, SPARCO PRO DRIVE, AAR Racing, COBRA, and any other seat whose mounting dimensions fall within 290mm length x 395mm breadth.
Why is edirb 067 excluded from the FT Type when it is compatible with other performance rails? The FT Type excludes edirb 067 in addition to the ZETA III Type-XL and ZODIA, whereas the FG, FK, FB, and IG Types support edirb 067. The vehicle-specific nature of the FT Type and the R35 chassis geometry appear to account for this difference. Buyers fitting an edirb 067 seat in a GT-R R35 should contact Bulletproof Automotive to confirm the correct rail before purchasing.
How much does the FT Type lower the seat position in the GT-R R35? The FT Type delivers a super low seating position of up to 50mm. Because it is developed specifically for the R35 rather than as a multi-fitment rail, it does not carry the vehicle-dependent caveat found on the FG, FK, FB, and IG Types stating that the seat position may not be lower depending on the vehicle.
How does the FT Type compare to other BRIDE 50mm super low performance rails? The FT Type is the only vehicle-specific rail in the BRIDE 50mm performance lineup. The FG, IG, FK, and FB Types are all multi-fitment rails designed for broad vehicle compatibility within their stated dimensions. The FT Type is engineered exclusively for the R35 and is not interchangeable with those rails in other vehicles, nor are those rails a direct substitute for the FT Type in the GT-R R35.
What are the mounting dimensions of the FT Type rail? The FT Type has mounting dimensions of 290mm length with a ±5mm tolerance and 395mm breadth, consistent with the other performance rails in the BRIDE lineup. Seats from other manufacturers that fall within these dimensions are also listed as compatible.
Is the BRIDE Super Seat Rail FT Type made in Japan? Yes. The FT Type is manufactured in Japan to BRIDE’s quality and fitment standards, consistent with the domestic production approach applied across the BRIDE seat and rail lineup.

About BRIDE

BRIDE is a Japan-based manufacturer specializing in seats and rail components designed to sit closest to the driver, offering maximum protection in a collision. Their ASEA-accredited products meet full vehicle inspection standards and pass six rigorous safety tests covering seat back impact, head restraint performance, seat and belt mounting, and flame resistance. BRIDE is also the first Japanese company to receive FIA endorsement for its seats, with nine models approved for international competition. Every seat is built by hand in Japan using precision-engineered shells and technical fabrics, with all components sourced domestically to keep quality tightly controlled from start to finish. For BRIDE, “Made in Japan” reflects a long-held standard built on ingenuity, meticulous craftsmanship, and technical knowledge; qualities that make their seats a trusted choice in the demanding environment of motorsport.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BRIDE FT Super Seat Rail [TYPE-FT]

Guaranteed Safe Checkout

BRIDE FT Super Seat Rail

Utilizes Sliders Made By Faurecia Exclusively For BRIDE

ASEA-Approved High Quality & Peace of Mind

Features

Applications

Frequently Asked Questions

About BRIDE

Reviews