BRIDE FB Super Seat Rail

The BRIDE Super Seat Rail FB Type is a Japanese-manufactured performance seat rail priced at JPY 42,900, offering the deepest seat position drop in the BRIDE performance rail lineup at up to 50mm below standard, subject to vehicle type. With mounting dimensions of 290mm length (±5mm tolerance) x 395mm breadth, the FB Type shares the same seat compatibility range as the FO Type, covering the BRIDE fixed bucket seat series, select edirb models, and a range of third-party performance seats, while delivering a significantly greater maximum position drop. For BRIDE seats, the FB Type supports the full fixed bucket seat series and edirb models 031, 042, 061, and 067, with the ZETA III Type-XL and ZODIA explicitly excluded. Third-party compatibility includes the RECARO SPG, SPARCO PRO DRIVE, AAR Racing, COBRA, and any other seat that falls within the 290mm x 395mm mounting dimensions.

Utilizes Sliders Made By Faurecia Exclusively For BRIDE

• BRIDE utilizes components from Faurecia (based in France), a renowned global manufacturer of mechanical elements, exclusively for the BRIDE super seat rail slider components, which are critical
• The sliders have upper rails that are 2.0mm in thickness and lower rails that are 2.3mm in thickness. They are designed to be locked on both the left and right sides, providing a secure fit without rattling. These sliders boast an impressive strength and durability, with a 10mm pitch and a slide amount of 220mm.

ASEA-Approved High Quality & Peace of Mind

• The ASEA–endorsed super seat rail has met the criteria of ASEA, a Japanese organization whose members include motorsports companies, manufactures of tuning parts, and companies selling such products

Features

• The lowest position that can be achieved varies by vehicle, with a maximum of 50mm
• Manufactured in Japan
• Seat mounting dimensions / length : 290mm (±5) x 395mm

Applications

• XETA IV Series
• ZIEG IV Series
• A.i.R. Series

Notes

• The seating position will vary depending on the kind of vehicle

Frequently Asked Questions

• What seats is the BRIDE Super Seat Rail FB Type compatible with? The FB Type is compatible with the BRIDE fixed bucket seat series and edirb models 031, 042, 061, and 067, excluding the ZETA III Type-XL and the ZODIA. Third-party compatibility includes the RECARO SPG, SPARCO PRO DRIVE, AAR Racing, COBRA, and any other seat whose mounting dimensions fall within 290mm length x 395mm breadth.
• Which BRIDE seats are not compatible with the FB Type? The ZETA III Type-XL and the ZODIA are explicitly excluded from FB Type compatibility. Buyers fitting either of these models should use the appropriate alternative rail for their specific seat.
• How much does the FB Type lower the seat position? The FB Type is rated for a super low position of up to 50mm below standard. The actual drop achieved depends on the specific vehicle and the maximum 50mm reduction is not guaranteed across all fitments. Additionally, depending on the vehicle type, the seat position may not be lower at all after installation. Buyers for whom achieving the maximum position drop is critical should confirm the achievable reduction for their specific vehicle before purchasing.
• How does the FB Type differ from the FO Type performance rail? Both the FB Type and FO Type share the same mounting dimensions of 290mm (±5mm) x 395mm and the same seat compatibility range. The key difference is the maximum seat position drop; the FB Type achieves up to 50mm compared to the FO Type’s maximum of 30mm. The FB Type is also priced higher at JPY 42,900 versus the FO Type at JPY 31,900, reflecting the greater engineering required to achieve the deeper position reduction.
• What are the mounting dimensions of the FB Type rail? The FB Type has mounting dimensions of 290mm length with a ±5mm tolerance and 395mm breadth. Seats from other manufacturers that fall within these dimensions are also listed as compatible. Confirm the mounting footprint of any unlisted seat against these dimensions before purchasing.
• Is the BRIDE Super Seat Rail FB Type made in Japan? Yes. The FB Type is manufactured in Japan to BRIDE’s quality and fitment standards, consistent with the domestic production approach applied across the BRIDE seat and rail lineup.
• Is an import side stay required for any of the compatible seats? No import side stay requirement is stated for the FB Type. All listed compatible seats, including the RECARO SPG and SPARCO PRO DRIVE, are directly compatible without additional hardware based on the source information provided.

About BRIDE

BRIDE is a Japan-based manufacturer specializing in seats and rail components designed to sit closest to the driver, offering maximum protection in a collision. Their ASEA-accredited products meet full vehicle inspection standards and pass six rigorous safety tests covering seat back impact, head restraint performance, seat and belt mounting, and flame resistance. BRIDE is also the first Japanese company to receive FIA endorsement for its seats, with nine models approved for international competition. Every seat is built by hand in Japan using precision-engineered shells and technical fabrics, with all components sourced domestically to keep quality tightly controlled from start to finish. For BRIDE, “Made in Japan” reflects a long-held standard built on ingenuity, meticulous craftsmanship, and technical knowledge; qualities that make their seats a trusted choice in the demanding environment of motorsport.