AWE Tuning Track Edition Exhaust – Diamond Black Tips (102mm) for B8.5 Audi S5

The AWE Tuning Track Edition Exhaust for the B8.5 Audi S5 is built around a straight-through, non-valved layout that removes rear muffling to prioritize flow and sound output. By reducing restriction in the rear section, it allows the supercharged 3.0T V6 to produce a more immediate, higher-volume exhaust note with a sharper edge under acceleration and more noticeable overrun. Without the modulation of a valved system, the tone remains consistently present across driving conditions, which gives the car a more direct, mechanical character. The system uses mandrel-bent stainless steel for durability and consistent flow, and it mounts to factory points for straightforward installation. Diamond black 102mm tips finish the rear with a look that fits the S5’s original styling.

Track Edition Exhaust

• For those who like it raw and rowdy, the Track Edition is for you. The Track Edition shares the same integrated frontpipe, bespoke midpipe resonator, and precision engineering as its Touring Edition counterpart, minus AWE’s patented drone-canceling solution, 180 Technology®.
• In place of the 180 Technology® resonator in the rear lies a Track Edition straight section. As a result, this version is known to get (really) rowdy in mid-range acceleration and deceleration, and may be too much for many. You’ve been warned.

What is 180 Technology?

• AWE Tuning’s patented 180 Technology works as follows: As exhaust gases exit the engine and flow into a resonator equipped with AWE’s 180 Technology, they pass through strategically located ports and into reflection chambers. Sound waves carried by these exhaust gases bounce off the walls of the reflection chambers. Depending on the sound requirements of each vehicle, AWE’s acoustic engineers adjust the size and location of the ports and chambers. By controlling these key elements, AWE Tuning can manage when the sound waves exit the chambers. The precise timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.
• Consistency Through Change:
  • AWE’s 180 Technology is not based on a “one size fits all” concept. Instead, AWE engineers design sound-canceling resonators based on the specific acoustics generated by different vehicle types, ensuring perfect sound every time. This approach is one reason AWE exhausts have earned a reputation for delivering the perfect tone, regardless of the application.
• What It Means to You:
  • The result? The elimination of unwanted tones in all AWE 180 Technology-equipped exhaust systems. The sound produced by this technology is the perfect, signature note, providing unlocked performance and spot-on tone every time.

Exhaust Tips

• Each exhaust system is equipped with three 4.5” double-walled, slash-cut tips, available in chrome silver or diamond black, each featuring a stamped AWE logo. The tips are individually adjustable, allowing for customization of their depth into the bumper based on personal preference.

Nope, It’s Not Valved

• During research and development, AWE conducted an extensive evaluation of the factory valve’s behavior under various driving conditions. They determined that there is no significant change in volume between modes requiring a valve. The valve remains closed only in comfort mode, opening upon reaching a throttle threshold. In Sport and Sport+ modes, the valve stays open, with Sport+ introducing burbles from the ECU. In the stock configuration, the exhaust routes through the side mufflers when the valve is closed to reduce interior volume and drone-prone frequencies, and through the center when the valve is open.

Conversion Kits

• AWE has made it simple to convert between Track and Touring Editions if a change in interior volume is desired later.

Features

• Increased pipe diameter to 2.5” to better let the engine exhale
• Available with Chrome Silver or Diamond Black individually adjustable tips
• Engineered, developed, tested and manufactured in-house
• Thick .065″ wall T304L stainless steel tubing
• High quality stainless steel band clamps
• Optional downpipes for fine tuning sound volume
• No CEL – Guaranteed
• Perfect Fitment – Guaranteed
• Lifetime Warranty
• 180 Technology: No
• 50 State Legal: Yes
• Edition: Track Edition
• Fit Gurantee: Yes
• Material: T304L Stainless Steel
• No CEL Guarantee: Yes

Applications

• Audi S5 Base : B8.5 (2013  -2017)
• Audi S5 Cabriolet : B8.5 (2013)
• Audi S5 Premium Plus : B8.5 (2014 to 2016)
• Audi S5 Prestige :  B8.5 (2014 to 2016)

Other Editions

• Track edition w/ chrome silver tips
• Track edition w/ diamond black tips
• Touring edition w/ chrome silver tips

Notes

• AWE’s Perfect Fitment Guarantee, No CEL Guarantee, and Lifetime Warranty all come standard
• AWE exhausts are not designed to mate with other aftermarket front pipes
• 100% Emission-Friendly
• Touring Edition exhausts do not interfere with any factory emissions equipment

About AWE Tuning

AWE is driven by a singular goal: Unleashing Performance. Renowned for their handcrafted, award-winning performance exhausts, along with rigorously tested carbon fiber intakes and high-efficiency intercoolers, AWE is at the forefront of innovation, design, production, retail, and global distribution of their performance products. These products are available through a select network of dealers, online, and directly from their advanced facility located near Philadelphia, Pennsylvania. Established in 1991, AWE’s team of experts, comprising researchers, engineers, innovators, and seasoned drivers, has been dedicated to developing and introducing top-tier performance enhancements for some of the world’s most prestigious vehicles.