Do the ADRO F82 M4 Side Skirts Final Edition use tape?

No. They mount with 30 screws onto the factory rocker points, with no adhesive, so the fit is mechanically located rather than dependent on surface preparation.

Will they fit an F80 M3?

No. ADRO makes a separate Final Edition skirt for the F80 M3. These are listed for the F82 M4 and F83 M4 Convertible.

What does Final Edition mean?

It is ADRO's last aero programme for the F8X chassis, with each part built as the definitive version rather than another variation.

Is this the same skirt ADRO sold before?

No, it is the second iteration, refined from the original and intended to be the last word on this part for the F82.

How much downforce do they add?

ADRO publishes 257N (58 lbs) of downforce for 63N (14 lbs) of drag on the F82, measured for the complete Final Edition kit rather than the skirts alone.

Do they require cutting?

No. They fit the F82 without modification, using the rocker's existing mounting points.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

ADRO Carbon Side Skirts Final Edition for F82 BMW M4

The F8X generation is done, and ADRO decided to finish it properly rather than let the parts trail off. The Final Edition line is the last aero ADRO will make for the F80 M3 and F82 M4, built as the definitive version of each piece. The ADRO F82 M4 Side Skirts Final Edition are the second iteration of ADRO’s F82 skirts, refined from the original, and they run the full length of the rocker panel rather than stopping short the way a shorter blade does. That full run is the point: it sharpens the side profile and, more importantly, visually connects the front lip to the rear diffuser so the car reads as one aero package instead of three separate purchases. Fitted with the rest of the Final Edition kit the F82 setup adds 257N (58 lbs) of downforce for 63N (14 lbs) of drag.

Bolted, Not Taped

Unlike the front lip and the spoiler in this line, the skirts mount with 30 screws onto the F82’s factory rocker mounting points and use no adhesive at all. That is worth knowing before you order: it means the fit is mechanically located rather than dependent on surface preparation, it survives pressure washing and winter without the anxiety that comes with a tape-mounted part, and it can be removed without heat or fishing line. On a panel this long, screwing to factory points is the right call.

ADRO F82 M4 Side Skirts Final Edition Construction

The skirts are clear coated wet carbon fiber, hand laid, and designed to fit the F82 M4 without modification to the rocker. Wet carbon is the appropriate process for a long cosmetic panel that is bolted rather than structural, and the clear coat is what protects the weave from the stone chips a rocker-level part inevitably collects.

Features

30 screws supplied, no adhesive required
Bolts to the F82’s factory rocker mounting points
Clear coated carbon fiber, second iteration of the ADRO F82 skirt
Fits the F82 M4 and F83 M4 Convertible without modification
Full-length rocker coverage tying the front and rear aero together
Part of the Final Edition kit, ADRO’s last aero programme for the F8X

What’s Included

Carbon fiber side skirt, left and right (x2)
Screws (x30)

Applications

BMW M4: F82 | 2015-2020
BMW M4 Convertible: F83 | 2015-2019

Notes

The published downforce and drag figures are for the complete Final Edition kit, not for the side skirts on their own
These fit the F82 M4 and F83 Convertible only. The F80 M3 uses a different skirt, sold separately
The ADRO F82 M4 Side Skirts Final Edition is sold as a left and right pair
Professional installation of the ADRO F82 M4 Side Skirts Final Edition is recommended. For fitment questions on your car, contact us.

Frequently Asked Questions

Do the ADRO F82 M4 Side Skirts Final Edition use tape? No. They mount with 30 screws onto the factory rocker points, with no adhesive, so the fit is mechanically located rather than dependent on surface preparation.
Will they fit an F80 M3? No. ADRO makes a separate Final Edition skirt for the F80 M3. These are listed for the F82 M4 and F83 M4 Convertible.
What does Final Edition mean? It is ADRO’s last aero programme for the F8X chassis, with each part built as the definitive version rather than another variation.
Is this the same skirt ADRO sold before? No, it is the second iteration, refined from the original and intended to be the last word on this part for the F82.
How much downforce do they add? ADRO publishes 257N (58 lbs) of downforce for 63N (14 lbs) of drag on the F82, measured for the complete Final Edition kit rather than the skirts alone.
Do they require cutting? No. They fit the F82 without modification, using the rocker’s existing mounting points.

About ADRO

ADRO is an aftermarket manufacturer specializing in carbon fiber aerodynamic components for modern performance and sports cars, with aero engineered by former F1 and OEM designers. ADRO develops its parts using CFD simulation with a focus on adding usable downforce at minimal drag cost while preserving each vehicle’s factory balance and lines, producing them in high-grade prepreg carbon fiber. Bulletproof Automotive carries ADRO’s aero program for enthusiasts looking to make their cars faster where it counts.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.