Is the ADRO F80 M3 Spoiler Final Edition prepreg or wet carbon?

Prepreg, also called dry carbon. Resin is pre-impregnated at a precise ratio and cured under heat and pressure, which shows in the finish, the weight and how accurately the part holds its shape.

Is this a revision of an earlier ADRO spoiler?

No. It is ADRO's first and only spoiler for the F80 M3, designed from scratch as the definitive version for the chassis.

With 3M double sided tape and the supplied adhesion promoter. No screws and no drilling, so the trunk lid is not modified, but the bond depends on proper degreasing and fitting somewhere warm.

Will it fit an F82 M4?

No. ADRO makes a separate Final Edition spoiler for the F82 and F83. This one is listed for the F80 M3 only.

How much downforce does it add?

ADRO publishes 516N (116 lbs) for 19N (4 lbs) of drag on the F80, measured for the complete Final Edition kit rather than the spoiler alone.

What does Final Edition mean?

It is ADRO's last aero programme for the F8X chassis, each part built as the definitive version rather than another variation.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

ADRO Prepreg Carbon Spoiler Final Edition for F80 BMW M3

The F8X generation is done, and ADRO decided to finish it properly rather than let the parts trail off. The Final Edition line is the last aero ADRO will make for the F80 M3 and F82 M4, built as the definitive version of each piece. The ADRO F80 M3 Spoiler Final Edition is the only spoiler ADRO has built for this chassis, designed from scratch as the definitive one rather than refined from an earlier version. It sits flush along the trailing edge of the trunk lid, adding a deliberate but restrained punctuation to the F80’s rear, and it is prepreg dry carbon rather than the wet carbon used on the lip and skirts. Fitted with the rest of the Final Edition kit, the F80 setup adds 516N (116 lbs) of downforce for just 19N (4 lbs) of drag.

Flush, Not Perched

Most aftermarket spoilers sit proud of the trunk lid and leave a shadow line where the two meet, which is the detail that reads as modified rather than specified. This one follows the F80’s trailing edge and sits against it without a step, so the transition from paint to exposed carbon is continuous. On a four-door that restraint matters more than it would on the coupe: the F80’s proportions are best served by a spoiler that finishes the car rather than one that dominates it.

Why Prepreg on This Part

Prepreg carbon fiber begins with resin pre-impregnated into the fiber at a precise ratio, then cured under heat and pressure, giving a resin-to-fiber consistency wet lay cannot achieve. It is the process used in motorsport and aerospace, and on the ADRO F80 M3 Spoiler Final Edition it shows in the finish, the weight and the structural integrity of the part. It matters for fitment too, since a spoiler that must sit flush along a curved trailing edge has to hold its shape exactly through cure.

Features

Adhesion promoter and two rolls of double sided tape supplied
Fits the F80 M3 without trunk lid modification
Flush fitment along the trailing edge, no visible step
Part of the Final Edition kit, ADRO’s last aero programme for the F8X
Prepreg dry carbon fiber, cured under heat and pressure
Restrained profile suited to the F80’s sedan proportions

What’s Included

Adhesion promoter (x2 packs)
Double sided tape (x2 rolls)
Prepreg spoiler (x1)

Applications

BMW M3: F80 | 2015-2020

Complete the Final Edition Aero

F8X M3 / M4 front lip (A14A10-1202)
F80 M3 side skirts (A14A00-1401)

Notes

The ADRO F80 M3 Spoiler Final Edition mounts with 3M double sided tape only. Degrease the trunk lid thoroughly, use the supplied adhesion promoter and fit in a warm environment
The published downforce and drag figures are for the complete Final Edition kit, not for the spoiler on its own
This fits the F80 M3 only. The F82 M4 spoiler is a separate part
The ADRO F80 M3 Spoiler Final Edition is sold as one spoiler
Professional installation of the ADRO F80 M3 Spoiler Final Edition is recommended. For fitment questions on your car, contact us.

Frequently Asked Questions

Is the ADRO F80 M3 Spoiler Final Edition prepreg or wet carbon? Prepreg, also called dry carbon. Resin is pre-impregnated at a precise ratio and cured under heat and pressure, which shows in the finish, the weight and how accurately the part holds its shape.
Is this a revision of an earlier ADRO spoiler? No. It is ADRO’s first and only spoiler for the F80 M3, designed from scratch as the definitive version for the chassis.
How is it attached? With 3M double sided tape and the supplied adhesion promoter. No screws and no drilling, so the trunk lid is not modified, but the bond depends on proper degreasing and fitting somewhere warm.
Will it fit an F82 M4? No. ADRO makes a separate Final Edition spoiler for the F82 and F83. This one is listed for the F80 M3 only.
How much downforce does it add? ADRO publishes 516N (116 lbs) for 19N (4 lbs) of drag on the F80, measured for the complete Final Edition kit rather than the spoiler alone.
What does Final Edition mean? It is ADRO’s last aero programme for the F8X chassis, each part built as the definitive version rather than another variation.

About ADRO

ADRO is an aftermarket manufacturer specializing in carbon fiber aerodynamic components for modern performance and sports cars, with aero engineered by former F1 and OEM designers. ADRO develops its parts using CFD simulation with a focus on adding usable downforce at minimal drag cost while preserving each vehicle’s factory balance and lines, producing them in high-grade prepreg carbon fiber. Bulletproof Automotive carries ADRO’s aero program for enthusiasts looking to make their cars faster where it counts.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.