Do the BILSTEIN B16 PSS10 Coilovers for S550 fit cars with MagneRide?

BILSTEIN lists the 2015 to 2023 Mustang EcoBoost and GT in their standard and upper trims, the V6 through 2017, the Bullitt and the 2015 GT 50 Years Limited Edition, without naming MagneRide. MagneRide dampers are electronically controlled, so confirm fitment for a MagneRide car with Bulletproof Automotive before ordering.

How much does the kit lower the S550 Mustang?

For the S550 Mustang, BILSTEIN quotes lowering of 20mm to 45mm at the front and 25mm to 40mm at the rear compared with the factory ride height. On the S550 Mustang, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for S550 are rated for axle loads up to 1,075kg front and 1,148kg rear.

Is the B16 kit too firm for daily driving on the S550 Mustang?

Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the S550 Mustang, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most S550 Mustang owners settle on a road setting and change it only for events.

Does the kit need a wheel alignment afterwards?

Yes. Any change to ride height alters camber and toe, so the S550 Mustang needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the S550 Mustang before the alignment, so it is only paid for once.

Who supports the kit after purchase?

Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the S550 Mustang goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the S550 Mustang is made in Germany to the standard BILSTEIN applies to its original-equipment work.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BILSTEIN B16 PSS10 Coilovers for S550 Ford Mustang

BILSTEIN’s B16 PSS10 Coilovers for S550 Ford Mustang fit the 2015 to 2023 GT, EcoBoost, V6 and Bullitt, the first Mustang generation built around independent rear suspension. That rear end deserves better than tired factory dampers, and this kit brings German monotube units in threaded bodies with a 10-click adjuster at each corner. It suits the S550 owner who autocrosses on weekends and still drives the car to work.

Design and Performance

A 400 lbs/in progressive front spring and a stiff 857 lbs/in progressive rear control squat under power and help the S550 put its torque down out of slow corners. BILSTEIN rates the kit for the weight of the V8 GT.

Features

A 10-position adjuster on each S550 Mustang damper, firming or softening rebound and compression in one step
Monotube construction with a zinc-coated threaded body that sets the S550 Mustang ride height and guards against corrosion
Progressive springs finished in blue, with rates matched to the front and rear axle loads of the S550 Mustang
BILSTEIN Limited 5-Year Warranty, with the B16 PSS10 Coilovers for S550 made in Germany

Specifications

Damping adjustment: 10 stages, rebound and compression together
Damper design: Monotube
Front spring rate: 400 lbs/in, progressive
Rear spring rate: 857 lbs/in, progressive
Front lowering: 20-45mm
Rear lowering: 25-40mm
Maximum axle load: 1,075kg front, 1,148kg rear
Finish: Zinc front, yellow rear dampers, blue springs
Country of origin: Germany
Warranty: BILSTEIN Limited 5-Year Warranty

Applications

Ford Mustang: S550 (including EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, V6 and Bullitt) | 2015-2023

Notes

BILSTEIN specifies its coilover spanner wrench for setting the spring seats and lock rings on this kit
A wheel alignment is needed after installation and after any ride height change

Frequently Asked Questions

Do the BILSTEIN B16 PSS10 Coilovers for S550 fit cars with MagneRide? BILSTEIN lists the 2015 to 2023 Mustang EcoBoost and GT in their standard and upper trims, the V6 through 2017, the Bullitt and the 2015 GT 50 Years Limited Edition, without naming MagneRide. MagneRide dampers are electronically controlled, so confirm fitment for a MagneRide car with Bulletproof Automotive before ordering.
How much does the kit lower the S550 Mustang? For the S550 Mustang, BILSTEIN quotes lowering of 20mm to 45mm at the front and 25mm to 40mm at the rear compared with the factory ride height. On the S550 Mustang, the threaded bodies set the exact height inside that range. The B16 PSS10 Coilovers for S550 are rated for axle loads up to 1,075kg front and 1,148kg rear.
Is the B16 kit too firm for daily driving on the S550 Mustang? Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the S550 Mustang, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most S550 Mustang owners settle on a road setting and change it only for events.
Does the kit need a wheel alignment afterwards? Yes. Any change to ride height alters camber and toe, so the S550 Mustang needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the S550 Mustang before the alignment, so it is only paid for once.
Who supports the kit after purchase? Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the S550 Mustang goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the S550 Mustang is made in Germany to the standard BILSTEIN applies to its original-equipment work.

About BILSTEIN

BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BILSTEIN B16 PSS10 Coilovers for S550 Ford Mustang [48-253901]

Guaranteed Safe Checkout

BILSTEIN B16 PSS10 Coilovers for S550 Ford Mustang

Design and Performance

Features

Specifications

Applications

Notes

Frequently Asked Questions

About BILSTEIN

Reviews