Which Mk7 Golf does the BILSTEIN B16 PSS10 Coilovers for Mk7 kit fit?

BILSTEIN makes three B16 PSS10 kits for the non-GTI Mk7 Golf, separated by strut size and rear axle. This one is for cars with a 55mm outside strut diameter. A Golf with the wrong strut or rear axle needs one of the other two kits, so Bulletproof Automotive checks the VIN before shipping.

What is the difference between BILSTEIN B14 and B16 kits?

For the Mk7 Golf, both would be height-adjustable BILSTEIN coilover kits with threaded bodies and matched springs. B14 dampers have fixed valving chosen by BILSTEIN, while the B16 adds a 10-stage adjuster, so an owner of the Mk7 Golf can firm the damping up for a track day and soften it for the drive home without changing parts.

How low do the BILSTEIN B16 PSS10 Coilovers for Mk7 with 55mm strut go?

BILSTEIN does not publish a lowering range or an application table for this part number. The B16 PSS10 Coilovers for Mk7 cars set height on threaded bodies, and Bulletproof Automotive can confirm fitment and the expected range with BILSTEIN for a specific car.

Does the kit need a wheel alignment afterwards?

Yes. Any change to ride height alters camber and toe, so the Mk7 Golf needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Mk7 Golf before the alignment, so it is only paid for once.

Who supports the kit after purchase?

Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the Mk7 Golf goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Mk7 Golf is made in Germany to the standard BILSTEIN applies to its original-equipment work.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut

BILSTEIN’s B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut, are for 2015 and 2016 Golf and Golf SportWagen models built with a 55mm outside strut diameter. The kit fits BILSTEIN monotube dampers on threaded bodies with progressive springs and a 10-click adjuster per corner.

Design and Performance

Progressive springs at 320 lbs/in front and 423 lbs/in rear sit on zinc-plated front and yellow rear dampers.

Features

10-stage damping adjustment on every corner of the Mk7 Golf, changing rebound and compression with each click
Threaded, zinc-coated damper bodies for setting ride height at each corner of the Mk7 Golf
Springs and dampers tuned as a pair for the Mk7 Golf, with progressive spring rates and a blue finish
Built in Germany, the B16 PSS10 Coilovers for Mk7 are backed by the BILSTEIN Limited 5-Year Warranty

Specifications

Damping adjustment: 10 stages, rebound and compression together
Damper design: Monotube
Front spring rate: 320 lbs/in, progressive
Rear spring rate: 423 lbs/in, progressive
Finish: Zinc front, yellow rear dampers, blue springs
Country of origin: Germany
Warranty: BILSTEIN Limited 5-Year Warranty

Applications

Volkswagen Golf: Mk7 (including Launch Edition, S, SE, SEL, TDI S, TDI SE and TDI SEL) | 2015-2016
Volkswagen Golf SportWagen: Mk7 (including S, SE, SEL, TDI S and TDI SE) | 2015-2016

Notes

BILSTEIN USA does not publish an application list for this part number; fitment shown is from the BILSTEIN distributor listing
For other Mk7 Golf versions, see the 50mm strut and independent rear kit and the 50mm strut and solid rear axle kit
BILSTEIN specifies its coilover spanner wrench for setting the spring seats and lock rings on this kit
A wheel alignment is needed after installation and after any ride height change

Frequently Asked Questions

Which Mk7 Golf does the BILSTEIN B16 PSS10 Coilovers for Mk7 kit fit? BILSTEIN makes three B16 PSS10 kits for the non-GTI Mk7 Golf, separated by strut size and rear axle. This one is for cars with a 55mm outside strut diameter. A Golf with the wrong strut or rear axle needs one of the other two kits, so Bulletproof Automotive checks the VIN before shipping.
What is the difference between BILSTEIN B14 and B16 kits? For the Mk7 Golf, both would be height-adjustable BILSTEIN coilover kits with threaded bodies and matched springs. B14 dampers have fixed valving chosen by BILSTEIN, while the B16 adds a 10-stage adjuster, so an owner of the Mk7 Golf can firm the damping up for a track day and soften it for the drive home without changing parts.
How low do the BILSTEIN B16 PSS10 Coilovers for Mk7 with 55mm strut go? BILSTEIN does not publish a lowering range or an application table for this part number. The B16 PSS10 Coilovers for Mk7 cars set height on threaded bodies, and Bulletproof Automotive can confirm fitment and the expected range with BILSTEIN for a specific car.
Does the kit need a wheel alignment afterwards? Yes. Any change to ride height alters camber and toe, so the Mk7 Golf needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Mk7 Golf before the alignment, so it is only paid for once.
Who supports the kit after purchase? Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the Mk7 Golf goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Mk7 Golf is made in Germany to the standard BILSTEIN applies to its original-equipment work.

About BILSTEIN

BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut [48-230049]

Guaranteed Safe Checkout

BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 55mm Strut

Design and Performance

Features

Specifications

Applications

Notes

Frequently Asked Questions

About BILSTEIN

Reviews