Which Mk7 Golf does the BILSTEIN B16 PSS10 Coilovers for Mk7 kit fit?

BILSTEIN makes three B16 PSS10 kits for the non-GTI Mk7 Golf, separated by strut size and rear axle. This one is for cars with a 50mm outside strut diameter and independent rear suspension. A Golf with the wrong strut or rear axle needs one of the other two kits, so Bulletproof Automotive checks the VIN before shipping.

How much does the kit lower the Mk7 Golf?

For the Mk7 Golf, BILSTEIN quotes lowering of 30mm to 50mm front and rear compared with the factory ride height. The B16 PSS10 Coilovers for Mk7 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the Mk7 Golf can run in practice.

Is the B16 kit too firm for daily driving on the Mk7 Golf?

Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the Mk7 Golf, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most Mk7 Golf owners settle on a road setting and change it only for events.

Does the kit need a wheel alignment afterwards?

Yes. Any change to ride height alters camber and toe, so the Mk7 Golf needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Mk7 Golf before the alignment, so it is only paid for once.

Who supports the kit after purchase?

Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the Mk7 Golf goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Mk7 Golf is made in Germany to the standard BILSTEIN applies to its original-equipment work.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear

BILSTEIN’s B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear, fit the 2015 to 2021 Golf and the 2015 to 2019 Golf SportWagen built with a 50mm outside strut diameter and multi-link independent rear suspension. The kit lowers both ends 30mm to 50mm and adds a 10-click adjuster per corner.

Design and Performance

A 400 lbs/in progressive front spring pairs with a 302 lbs/in linear rear, on zinc-plated front and yellow rear monotube dampers.

Features

A 10-position adjuster on each Mk7 Golf damper, firming or softening rebound and compression in one step
Monotube construction with a zinc-coated threaded body that sets the Mk7 Golf ride height and guards against corrosion
Progressive front and linear rear springs finished in blue, with rates matched to the front and rear axle loads of the Mk7 Golf
BILSTEIN Limited 5-Year Warranty, with the B16 PSS10 Coilovers for Mk7 made in Germany

Specifications

Damping adjustment: 10 stages, rebound and compression together
Damper design: Monotube
Front spring rate: 400 lbs/in, progressive
Rear spring rate: 302 lbs/in, linear
Front lowering: 30-50mm
Rear lowering: 30-50mm
Finish: Zinc front, yellow rear dampers, blue springs
Country of origin: Germany
Warranty: BILSTEIN Limited 5-Year Warranty

Applications

Volkswagen Golf: Mk7 (including Launch Edition, S, SE, SEL, Wolfsburg Edition and TSi) | 2015-2021
Volkswagen Golf SportWagen: Mk7 (including S, SE and SEL) | 2015-2019

Notes

For cars with a 50mm strut and independent rear suspension; see the 50mm strut and solid rear axle kit and the 55mm strut kit for other Mk7 Golf versions
BILSTEIN specifies its coilover spanner wrench for setting the spring seats and lock rings on this kit
A wheel alignment is needed after installation and after any ride height change

Frequently Asked Questions

Which Mk7 Golf does the BILSTEIN B16 PSS10 Coilovers for Mk7 kit fit? BILSTEIN makes three B16 PSS10 kits for the non-GTI Mk7 Golf, separated by strut size and rear axle. This one is for cars with a 50mm outside strut diameter and independent rear suspension. A Golf with the wrong strut or rear axle needs one of the other two kits, so Bulletproof Automotive checks the VIN before shipping.
How much does the kit lower the Mk7 Golf? For the Mk7 Golf, BILSTEIN quotes lowering of 30mm to 50mm front and rear compared with the factory ride height. The B16 PSS10 Coilovers for Mk7 set the exact height inside that range on their threaded bodies. Corner weights and wheel fitment decide how low the Mk7 Golf can run in practice.
Is the B16 kit too firm for daily driving on the Mk7 Golf? Not on its softer settings. The 10-stage adjuster spans a range BILSTEIN chose for the Mk7 Golf, so the lower clicks keep a usable ride over rough pavement while the upper clicks add body control for spirited roads or track days. Most Mk7 Golf owners settle on a road setting and change it only for events.
Does the kit need a wheel alignment afterwards? Yes. Any change to ride height alters camber and toe, so the Mk7 Golf needs a four-wheel alignment once the suspension has settled at its final height, and again after any later height change. Settle on the final height of the Mk7 Golf before the alignment, so it is only paid for once.
Who supports the kit after purchase? Bulletproof Automotive does. BILSTEIN backs the B16 PSS10 kit with its Limited 5-Year Warranty, and any claim for the Mk7 Golf goes through us to BILSTEIN, so the owner has one point of contact from order to support. The kit for the Mk7 Golf is made in Germany to the standard BILSTEIN applies to its original-equipment work.

About BILSTEIN

BILSTEIN was founded in 1873 by August Bilstein in Altenvoerde, now Ennepetal, Germany, where its engineers are still based. In 1957 it fitted the first monotube gas pressure shock absorber to a Mercedes-Benz series production car, and Audi, BMW, Porsche and Volkswagen are among the carmakers that have used its dampers as original equipment since. BILSTEIN develops its suspension on its own test circuit in Papenburg and on the Nürburgring Nordschleife, and it has been part of thyssenkrupp since 2005.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear [48-254960]

Guaranteed Safe Checkout

BILSTEIN B16 PSS10 Coilovers for Mk7 Volkswagen Golf, 50mm Strut and Independent Rear

Design and Performance

Features

Specifications

Applications

Notes

Frequently Asked Questions

About BILSTEIN

Reviews