What comes in the EXEDY Stage 2 Cerametallic Clutch thick disc DSM kit?

Turn 14 lists the 05950 as including the pressure plate, the thick cerametallic disc, the release bearing and an alignment tool. The pilot bearing and flywheel are not listed, so plan to resurface or replace the flywheel and check the pilot bearing while the transaxle is out of the car.

Is the thick disc better than the thin disc for a DSM?

For hard use, yes. The thick-disc EXEDY Stage 2 Cerametallic Clutch 05950 is rated at 305 lb-ft at the wheels and 381 lb-ft at the flywheel, against 278 and 347 for the thin-disc 05900, and its extra friction material handles launch heat better. The thin disc suits a street car with modest power.

Will this clutch fit a 1G Eclipse GSX with a 6-bolt motor?

Yes. Turn 14 lists the 05950 for the AWD cars with the 6-bolt crank up to April 1992 and with the 7-bolt crank from May 1992, noting that the kit fits both 6 and 7 crank bolt flywheels. The flywheel itself must match the crank in the car.

How much power will the thick disc DSM clutch hold?

EXEDY rates the 05950 at 381 lb-ft of torque capacity at the flywheel and 305 lb-ft at the wheels. A 4G63 with a larger turbo, fuel upgrades and a tune is a good match for this EXEDY Stage 2 Cerametallic Clutch, while high-boost drag builds on slicks need a multi-plate clutch.

Does it fit the Stealth R/T Turbo or 3000GT VR-4?

No. Turn 14 lists the 05950 for the non-turbo Stealth Base, ES and R/T and the 3000GT Base, SL and Spyder SL. The twin-turbo AWD cars use a different clutch and are not on its list, so confirm with EXEDY before fitting one.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

EXEDY Stage 2 Cerametallic Clutch Kit for 1G / 2G Mitsubishi Eclipse and 3000GT, Eagle Talon and Dodge Stealth (Thick Disc)

EXEDY’s Stage 2 Cerametallic Clutch Kit for 1G / 2G Mitsubishi Eclipse and 3000GT, Eagle Talon and Dodge Stealth with the thick disc is the version to buy for a DSM that launches hard, runs a bigger turbo or sees the drag strip. The thicker cerametallic disc soaks up heat that would glaze a thin one, and EXEDY rates it at 305 lb-ft at the wheels.

Design and Performance

A ductile-cast cover sits over a thick cerametallic disc, and the extra disc thickness gives the clutch more capacity to absorb launch heat, which is where the thin-disc 05900 gives ground. The sprung center damper reduces shock through the AWD transfer case and rear differential on GSX, Talon TSi AWD and VR-4 cars.

Features

EXEDY Stage 2 Cerametallic Clutch with a thick disc
225 mm disc on a 20-tooth, 22.4 mm spline
Rated at 381 lb-ft at the flywheel and 305 lb-ft at the wheels
Sprung center damper to reduce driveline shock
SFI 1.1 compliant, according to EXEDY

What’s Included

Pressure plate
Thick cerametallic clutch disc
Release bearing
Clutch alignment tool

Applications

Dodge Stealth: 1991-1996 | 3.0L V6 (Base, ES and R/T)
Eagle Summit: 1992-1996 | 2.4L L4
Eagle Talon TSi: 1990-1998 | 2.0L L4 turbo
Mitsubishi 3000GT: 1991-1999 | 3.0L V6 (Base, SL and Spyder SL)
Mitsubishi Eclipse: 1990-1999 | 2.0L L4 (GS to 1994, turbo GST and GSX)
Mitsubishi Eclipse Spyder: 1996-1999 | 2.4L L4 (GS) and 2.0L L4 turbo (GST)
Mitsubishi Expo: 1992-1995 | 2.4L L4 (including Expo LRV)
Mitsubishi Galant: 1994-1997 | 2.4L L4
Mitsubishi Galant: 1991-1992 | 2.0L L4 (GS, GSR and GSX)
Mitsubishi Galant VR-4: 1991-1992 | 2.0L L4 turbo
Plymouth Laser RS: 1990-1994 | 2.0L L4

Notes

Turn 14 lists the AWD cars by crank type, 6-bolt up to 04/1992 and 7-bolt from 05/1992; the clutch is listed for both
The twin-turbo 3000GT VR-4 and Stealth R/T Turbo do not appear in the Turn 14 application list for this kit
Turn 14 gives two clamp load figures, 1,544 and 2,136 lb, and two clutch torque figures, 479 and 492 lb-ft, so neither pair is printed here

Frequently Asked Questions

What comes in the EXEDY Stage 2 Cerametallic Clutch thick disc DSM kit? Turn 14 lists the 05950 as including the pressure plate, the thick cerametallic disc, the release bearing and an alignment tool. The pilot bearing and flywheel are not listed, so plan to resurface or replace the flywheel and check the pilot bearing while the transaxle is out of the car.
Is the thick disc better than the thin disc for a DSM? For hard use, yes. The thick-disc EXEDY Stage 2 Cerametallic Clutch 05950 is rated at 305 lb-ft at the wheels and 381 lb-ft at the flywheel, against 278 and 347 for the thin-disc 05900, and its extra friction material handles launch heat better. The thin disc suits a street car with modest power.
Will this clutch fit a 1G Eclipse GSX with a 6-bolt motor? Yes. Turn 14 lists the 05950 for the AWD cars with the 6-bolt crank up to April 1992 and with the 7-bolt crank from May 1992, noting that the kit fits both 6 and 7 crank bolt flywheels. The flywheel itself must match the crank in the car.
How much power will the thick disc DSM clutch hold? EXEDY rates the 05950 at 381 lb-ft of torque capacity at the flywheel and 305 lb-ft at the wheels. A 4G63 with a larger turbo, fuel upgrades and a tune is a good match for this EXEDY Stage 2 Cerametallic Clutch, while high-boost drag builds on slicks need a multi-plate clutch.
Does it fit the Stealth R/T Turbo or 3000GT VR-4? No. Turn 14 lists the 05950 for the non-turbo Stealth Base, ES and R/T and the 3000GT Base, SL and Spyder SL. The twin-turbo AWD cars use a different clutch and are not on its list, so confirm with EXEDY before fitting one.

About EXEDY

EXEDY Corporation of Neyagawa, Osaka, traces its clutch business back to 1923 and built its name as Daikin Clutch before adopting the EXEDY brand. It is a leading original-equipment maker of clutches and powertrain parts, and its racing line supplies Hyper Series multi-plate clutches for drag, circuit and rally use. EXEDY Globalparts Corporation, its wholly owned US subsidiary, supports the range in North America.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

EXEDY Stage 2 Cerametallic Clutch Kit for 1G / 2G Mitsubishi Eclipse and 3000GT, Eagle Talon and Dodge Stealth (Thick Disc) [05950]

Guaranteed Safe Checkout

EXEDY Stage 2 Cerametallic Clutch Kit for 1G / 2G Mitsubishi Eclipse and 3000GT, Eagle Talon and Dodge Stealth (Thick Disc)

Design and Performance

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About EXEDY

Reviews