How much lower will the LC 500 sit on the RS-R Down Sus Springs for URZ100?

RS-R lists an approximate drop of 20mm to 25mm at the front and 35mm to 40mm at the rear with the Down Sus Springs for URZ100. The exact figure varies with each car, its options and the condition of its factory dampers, so ride height should be checked after installation.

Do the springs work with the factory adaptive dampers?

Yes. The springs replace only the factory springs, and the factory dampers stay in place, so the drive modes keep working. RS-R chooses the rates with the factory suspension geometry and damping in mind, which keeps the ride close to factory comfort at the lower height.

Do these springs fit the LC 500h or the convertible?

RS-R states that fitment is unconfirmed for the hybrid and convertible models. The springs are listed for the 2018 and later LC 500 coupe, chassis URZ100, so owners of the LC 500h or the convertible should confirm fitment with Bulletproof Automotive before ordering.

What warranty do the RS-R springs carry?

RS-R covers its Ti2000 Down Sus springs for 3 years or 36,000 miles from the day of purchase. Bulletproof Automotive handles any warranty claim with RS-R for the owner, so there is a single point of contact if a spring sags or fails within that period.

Should lowering springs be installed by a shop?

It is the safer choice. Swapping springs means compressing them and removing the dampers, and the LC 500 needs a wheel alignment afterwards because the lower height changes camber and toe. A shop familiar with the car can also check the factory dampers while they are out.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

RS-R Ti2000 Down Sus Springs for URZ100 Lexus LC 500 (2018+)

RS-R’s Ti2000 Down Sus Springs for URZ100 Lexus LC 500 (2018+) give the V8 coupe a mild drop, about 20mm to 25mm at the front and 35mm to 40mm at the rear, while keeping the factory dampers. RS-R rates the springs at 6.42 kg/mm front and 4.07 kg/mm rear, chosen with the factory suspension geometry and damping in mind so the LC keeps its comfort. Made from RS-R’s lightweight Ti2000 spring wire, they close the fender gap and trim body roll without the cost of a full coilover kit.

Features

Ti2000 spring wire, RS-R’s lightweight, sag-resistant spring range
Rates chosen with the factory suspension geometry and damping in mind
A mild drop that closes the fender gap
Replaces the factory springs while keeping the factory dampers
Made in Japan by RS-R

Specifications

Spring rate, front: 6.42 kg/mm
Spring rate, rear: 4.07 kg/mm
Approximate drop, front: -20mm to -25mm (-0.8in to -1.0in)
Approximate drop, rear: -35mm to -40mm (-1.4in to -1.6in)
Warranty: 3 years or 36,000 miles from purchase

What’s Included

Front lowering springs (x2)
Rear lowering springs (x2)

Applications

Lexus LC 500: URZ100 | 2018-present | coupe

Notes

The Down Sus Springs for URZ100 kit replaces the factory springs only and works with the factory dampers
RS-R states fitment is unconfirmed for the hybrid LC 500h and the convertible
For full height and damping adjustment, see the RS-R Best-i Active Coilovers for XXZ100 Lexus LC500 / LC500h
A wheel alignment is needed after installation and after any ride height change

Frequently Asked Questions

How much lower will the LC 500 sit on the RS-R Down Sus Springs for URZ100? RS-R lists an approximate drop of 20mm to 25mm at the front and 35mm to 40mm at the rear with the Down Sus Springs for URZ100. The exact figure varies with each car, its options and the condition of its factory dampers, so ride height should be checked after installation.
Do the springs work with the factory adaptive dampers? Yes. The springs replace only the factory springs, and the factory dampers stay in place, so the drive modes keep working. RS-R chooses the rates with the factory suspension geometry and damping in mind, which keeps the ride close to factory comfort at the lower height.
Do these springs fit the LC 500h or the convertible? RS-R states that fitment is unconfirmed for the hybrid and convertible models. The springs are listed for the 2018 and later LC 500 coupe, chassis URZ100, so owners of the LC 500h or the convertible should confirm fitment with Bulletproof Automotive before ordering.
What warranty do the RS-R springs carry? RS-R covers its Ti2000 Down Sus springs for 3 years or 36,000 miles from the day of purchase. Bulletproof Automotive handles any warranty claim with RS-R for the owner, so there is a single point of contact if a spring sags or fails within that period.
Should lowering springs be installed by a shop? It is the safer choice. Swapping springs means compressing them and removing the dampers, and the LC 500 needs a wheel alignment afterwards because the lower height changes camber and toe. A shop familiar with the car can also check the factory dampers while they are out.

About RS-R

RS-R began in 1968 as a car parts shop in Osaka and has produced its own suspension, coilovers and mufflers since 1972. Now headquartered in Toyonaka, Osaka, where its plant has been since 1999, RS-R manufactures in-house in Japan, with coilover ranges including Sports-i, Black-i and Best-i and the Ti2000 spring range.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

RS-R Ti2000 Down Sus Springs for URZ100 Lexus LC 500 (2018+) [T981TD]

Guaranteed Safe Checkout

RS-R Ti2000 Down Sus Springs for URZ100 Lexus LC 500 (2018+)

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About RS-R

Reviews