Will the AWE Touring Edition Exhaust for G42 drone on the highway?

No. The Touring Edition Exhaust for G42 cars uses two resonators with AWE 180 Technology, which reflect sound back into the gas stream out of phase with drone frequencies. The note grows under throttle while the cabin stays settled at steady highway speed.

What is the difference between the AWE Touring and Track Edition on the M240i?

Both share the three inch front pipe, axle sections and tips. The Touring Edition adds two 180 Technology resonators in the rear sections to keep drone out of the cabin; the Track Edition uses straight pipe there, so it is lighter, louder and more raw.

Does the M240i need a tune after fitting this exhaust?

No. AWE lists the system as no tune required. The factory exhaust flap is set open and unplugged during removal, and the valve motor simulator in the kit keeps the DME from logging a fault, which AWE backs with its No Check Engine Light Guarantee.

How much power does the AWE exhaust add?

AWE measured 10 whp and 17 lb-ft at the wheels on a 2025 G42 M240i on stock software, comparing the stock car with this Touring Edition fitted on its own Mustang chassis dyno. Figures vary between dynos, so treat them as a guide.

Does it fit the M240i xDrive?

Yes. AWE lists the G42 M240i xDrive from 2022 and the rear drive M240i from 2023, both with the B58 3.0 liter turbo six. It bolts on with no cutting, and the factory chassis braces and splash guards are reused.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

AWE Tuning Touring Edition Exhaust for G42 BMW M240i with Chrome Silver Tips

AWE Tuning’s Touring Edition Exhaust for G42 BMW M240i with Chrome Silver Tips gives the B58 straight six a full three-inch path from the front pipe back, mandrel bent at AWE’s shop in Pennsylvania from U.S.-made T304L stainless with a 0.065-inch wall. Two resonators built around AWE’s patented 180 Technology cancel the frequencies that become cabin drone, so the extra voice arrives under throttle rather than at a steady cruise. Four polished four-inch tips fill the valance. It suits an owner who drives the coupe daily and wants it to sound expensive, not loud.

Drone Control Without Packing

AWE’s 180 Technology works with geometry. Sound enters ported reflection chambers sized so it rejoins the main stream 180 degrees out of phase, cancelling the problem frequency, and AWE holds a patent on the design and backs the system with a lifetime warranty.

Features

Patented 180 Technology resonators for drone-free cruising
Straight-through design from the front pipe to the tips
Quad slash-cut tips with integrated AWE-logo clamps
Direct bolt-on; factory braces and splash guards reused
Valve motor simulator included, no tune required
Lifetime warranty, Fitment Guarantee and No CEL Guarantee

Specifications

Tubing diameter: 3.0in
Wall thickness: 0.065in
Material: T304L stainless steel, U.S.-made
Flow increase over stock: 65%
Construction: CNC mandrel bent
Tips: 4.0in double-walled slash-cut, quad chrome silver
Published gain (stock software): +10 whp, +17 lb-ft

What’s Included

Front pipe
Axle sections (L/R)
Touring sections (L/R)
Tip outlets (L/R)
Quad 4in chrome silver tips with integrated AWE clamps (x4)
Stainless band clamps and mounting hardware
Valve motor simulator
Valve wiring extension lead

Applications

BMW M240i: G42 Coupe | 2023-present | 3.0L Turbo I6 B58
BMW M240i xDrive: G42 Coupe | 2022-present | 3.0L Turbo I6 B58

Notes

This Touring Edition Exhaust for G42 BMW M240i replaces everything from the front pipe back and bolts on with no cutting
AWE recorded 10 whp and 17 lb-ft at the wheels on a 2025 G42 M240i with this system on stock software, on its own Mustang chassis dyno
AWE states this system is 50 state legal: it does not tamper with any emissions control or monitoring device
The same Touring Edition system is also offered with Diamond Black Tips and with OE Tip Outlets for the factory finishers
For a louder, lighter system without the resonators, see the AWE Track Edition Exhaust with Chrome Silver Tips
See AWE’s installation guide and the full AWE G42 M240i range

Frequently Asked Questions

Will the AWE Touring Edition Exhaust for G42 drone on the highway? No. The Touring Edition Exhaust for G42 cars uses two resonators with AWE 180 Technology, which reflect sound back into the gas stream out of phase with drone frequencies. The note grows under throttle while the cabin stays settled at steady highway speed.
What is the difference between the AWE Touring and Track Edition on the M240i? Both share the three inch front pipe, axle sections and tips. The Touring Edition adds two 180 Technology resonators in the rear sections to keep drone out of the cabin; the Track Edition uses straight pipe there, so it is lighter, louder and more raw.
Does the M240i need a tune after fitting this exhaust? No. AWE lists the system as no tune required. The factory exhaust flap is set open and unplugged during removal, and the valve motor simulator in the kit keeps the DME from logging a fault, which AWE backs with its No Check Engine Light Guarantee.
How much power does the AWE exhaust add? AWE measured 10 whp and 17 lb-ft at the wheels on a 2025 G42 M240i on stock software, comparing the stock car with this Touring Edition fitted on its own Mustang chassis dyno. Figures vary between dynos, so treat them as a guide.
Does it fit the M240i xDrive? Yes. AWE lists the G42 M240i xDrive from 2022 and the rear drive M240i from 2023, both with the B58 3.0 liter turbo six. It bolts on with no cutting, and the factory chassis braces and splash guards are reused.

About AWE Tuning

AWE Tuning began in 1991 as an installer of aftermarket parts, which is why every AWE product carries a written Fitment Guarantee. It designs, machines and tests in-house at its headquarters in Horsham, Pennsylvania, outside Philadelphia, with its own Mustang chassis dynamometer; one recent AWE carbon intake took more than 350 hours of development. AWE is best known for its handcrafted Touring Edition, Track Edition and SwitchPath exhausts, alongside carbon fiber intakes and intercoolers.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

AWE Tuning Touring Edition Exhaust for G42 BMW M240i with Chrome Silver Tips [3015-42240]

Guaranteed Safe Checkout

AWE Tuning Touring Edition Exhaust for G42 BMW M240i with Chrome Silver Tips

Drone Control Without Packing

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About AWE Tuning

Reviews